• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.205-213
• /
• 1980

Stannite is mainly found in hypothermal ore deposits, whereas mawsonite and stannoidite occur characteristically with bornite and chalcopyrite in subvolcanic (xenothermal) ore deposits. Mawsonite always shows the replacement on the rims of stannoidite grains or along the grain boundaries of stannoidite, bornite and chalcopyrite. In the Tada mine, Japan, the following mineral assemblages of the Cu-Fe-Sn-S minerals were observed. 1) bornite-stannoidite; 2) stannoidite-chalcopyrite; 3) stannite-chalcopyrite; 4) bornite-mawsonite-stannoidite; 5) bornite-stannoidite-chalcopyrite; 6) mawsonite-stannoidite-chalcopyrite; 7) stannoidite-stannite-chalcopyrite; 8) bornite-mawsonite-stannoidite-chalcopyrite The heating and D.T.A. experimental results indicate that natural stannoidite containing 3 weight percent of zinc decomposes to bornite, stannite and chalcopyrite at above $500^{\circ}C$, whereas zinc-free synthetic stannoidite is stable up to $800^{\circ}C$. The stability temperature of zincian stannoidite depends on the zinc content. Mawsonite is stable at temperatures below $390^{\circ}C$ and decomposed to stannoidite, bornite and chalcopyrite above it. According to the sulfur fugacity determination by the electrum tarnish method the univariant assemblage of mawsonite, bornite, stannoidite and chalcopyrite requires a higher sulfur fugacity than that of bornite, stannoidite and chalcopyrite assemblage.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.1
• /
• pp.333-351
• /
• 2011

As the boundaries between disciplines have been weakened and interdisciplinary or multidisciplinary subjects have increased, there is a limitation to express subjects with DDC. This study evaluates DDC instructions using interdisciplinary numbers and classifying more than one discipline through Delphi research. As a result, it is found that there is a need for defining separately 'interdisciplinary subjects' and 'multidisciplinary subjects', based on the level of integration among disciplines, and improving the instruction to maintain the consistency in assigning and filing classification numbers. It is also discussed that to enhance the symbols' power of expression, an analytic/synthetic method could be adopted.

• Journal of Korea Port Economic Association
• /
• v.17 no.1
• /
• pp.53-72
• /
• 2001

This study focuses on analyzing the economic effects and probes the necessity of establishing a customs free zone at the Port of Busan. It first considers the economic effects of establishing a customs free zone at the Port of Busan, then suggests policy prescriptions for introducing and operating the free zone system and improving the logistics functions of the Port. The timeline of this study is focused on 2007, when all of Busan Port will operate as a customs free zone and the first stage of the New Busan Port and distribution parks will be built and opened for operation. The regression analysis, which was conducted using the inter-industry relations table(input-output table data), provided a quantitative prediction on the effects of making Busan Port into a customs free zone. Regarding the impact of a free zone system on the domestic and regional economy, this research found that the impact of a customs free zone on domestic industries and the regional economy once the customs free zone is established throughout all of Busan Port would be highly positive. The positive economic effects on the domestic and Busan regional economy might be further strengthened if the value-added logistics function of Busan Port could be supplemented by effective linking to the hinterlands.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.4
• /
• pp.234-237
• /
• 2015

In this work, in order to develop the ceramics with an excellent electrocaloric effect, $[Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}]TiO_3$ ceramics were fabricated by conventional solid state reaction method. The ceramics was observed as rhombohedral phase by X-ray diffraction patterns. To investigate the electrocaloric effect of the ceramics, P-E hysteresis loops were measured at various temperature. The temperature change ${\Delta}T$ of these ceramics was calculated using the Maxwell's relations. The maximum value of temperature change ${\Delta}T$ was obtained as 0.3 $1^{\circ}C$ at $165^{\circ}C$ under applied electric fields 45 kV/cm.

• Journal of architectural history
• /
• v.23 no.1
• /
• pp.51-62
• /
• 2014

Architecture is a product of numerous influences, as shown in the apprenticeships of Kim, Jung-Up and Kim, Swoo-Geun with Le Corbusier's influences. Therefore, its identity is need to be re-defined based on such complex relationships. The rhetorical images of 'the Map of Misreading', as the core of the poetic identification proposed by Harold Bloom's 'the Theory of Influence', provide an efficient way of explaining the relations between architectural apprenticeships and identities. This research is to re-build a new methodology of architectural criticism based on it. The diachronic transformations of the architecture of Seung, Hyo-Sang also had very characteristic 'revisionary ratios' about his precursor Kim, Swoo-Geun. As an antithetic stance of his precursor's final phase, his early days works pursued continuously geometric abstraction and objective images of the architecture of Adolf Loos. However, his recent works are showing the obvious symptoms of regression to his origins. Finally, the architectural identity should be re-conceptualized as a complexity, based on inter-textuality from complex influences. This new architectural identity can be reflected into the modern obsessive identity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.10
• /
• pp.615-619
• /
• 2015

In this study, in order to develop the composition ceramics with the excellent electrocaloric properties, 8/65/35 PLZT ceramics were fabricated by the conventional solid-state method with the addition of $Bi_2O_3$, CuO, $Li_2CO_3$ and the variation of sintering temperature from $930^{\circ}C$ to $990^{\circ}C$. The XRD pattern of all specimens indicated general perovskite structure and the rhombohedral phase were observed. Curie temperature ($T_c$) of all specimens was observed in the vicinity of about $190^{\circ}C$. Density, coercive field and remnant polarization of the specimen sintered at $950^{\circ}C$ was $7.55g/cm^3$, 8.895 kV/cm, $11.22{\mu}C/cm^2$, respectively. EC effect of PLZT ceramics was measured by indirect method and the temperature change ${\Delta}T$ due to the electrocaloric effect was calculated by Maxwell's relations. ${\Delta}T$ of ceramic sintered at $950^{\circ}C$ was $0.21^{\circ}C$ under application of 40 kV/cm at $190^{\circ}C$.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.56-64
• /
• 2006

Human Being is being that have the reason as well as body, and first liaison consists through this body justly with outside. The essence of environmental problem such as today can speak that is a harmful traces for health that leave in air, water, soil that pass body. Actual nature is 'Ecological nature', that is necessary for human life directly in survival and offer the integrated relations with harmony. This grafting of principle, that is a construction for architecture and interior architecture in environment furtherance, is required. This is not a subject of usefulness and contemplation, but essential approach the cogredience, that is forming connection directly with nature, is required. Therefore, this research does Questel about 'Nature epistemology, which nature and human's relation can be integrated by alive practical relation. Through this, the Relatedness of 'Natural environment and construction surrounding' is accomplished 'the whole unity' and this research wish to investigate basis that a actual human work's environment can be completed as 'Ecological nature'.

• The Journal of Korean Medical History
• /
• v.26 no.1
• /
• pp.27-39
• /
• 2013

The Theory of Meridian can be classified into early form of pre- and present form of after-. The representative early form of meridian is Eleven Meridians in Mawangdui scrolls(馬王堆帛書) which use Six Qi Diagnosis(六氣辨證). because it did not adopt Visceral Pattern Identification(臟腑辨證). The present form of meridian is Twelve Meridians of . It has developed to investigate relations between Visceral and disease with Five Phase Theory. Analyzing the name of the Six Meridians in the Shanghanlun(傷寒論)On Cold Damage, there are no hands, feet and visceral signs. and it is almost identical to Eleven Meridians in Mawangdui scrolls. According to , Eleven Meridians use only Six Foot Meridians(足六經) to classify diseases. This fact was applied identically to the Six Meridians in the Shanghanlun. Therefore many doctors, especially Hanzhihe(韓祗和) and Zhangzhicong(張志聰) mentioned that "I have never seen a book on Shanghanlun discuss about Hand Meridians(手經)."

• Advances in nano research
• /
• v.7 no.3
• /
• pp.157-167
• /
• 2019

In this paper, a classical plate model is utilized to formulate the wave propagation problem of magnetostrictive sandwich nanoplates (MSNPs) while subjected to hygrothermal loading with respect to the scale effects. Herein, magnetostriction effect is considered and controlled on the basis of a feedback control system. The nanoplate is supposed to be embedded on a visco-Pasternak substrate. The kinematic relations are derived based on the Kirchhoff plate theory; also, combining these obtained equations with Hamilton's principle, the local equations of motion are achieved. According to a nonlocal strain gradient theory (NSGT), the small scale influences are covered precisely by introducing two scale coefficients. Afterwards, the nonlocal governing equations can be derived coupling the local equations with those of the NSGT. Applying an analytical solution, the wave frequency and phase velocity of propagated waves can be gathered solving an eigenvalue problem. On the other hand, accuracy and efficiency of presented model is verified by setting a comparison between the obtained results with those of previous published researches. Effects of different variants are plotted in some figures and the highlights are discussed in detail.

• Structural Engineering and Mechanics
• /
• v.70 no.1
• /
• pp.55-66
• /
• 2019

This work deals with the size-dependent wave propagation analysis of functionally graded (FG) anisotropic nanoplates based on a nonlocal strain gradient refined plate model. The present model incorporates two scale coefficients to examine wave dispersion relations more accurately. Material properties of FG anisotropic nanoplates are exponentially varying in the z-direction. In order to solve the governing equations for bulk waves, an analytical method is performed and wave frequencies and phase velocities are obtained as a function of wave number. The influences of several important parameters such as material graduation exponent, geometry, Winkler-Pasternak foundation parameters and wave number on the wave propagation of FG anisotropic nanoplates resting on the elastic foundation are investigated and discussed in detail. It is concluded that these parameters play significant roles on the wave propagation behavior of the nanoplates. From the best knowledge of authors, it is the first time that FG nanoplate made of anisotropic materials is investigated, so, presented numerical results can serve as benchmarks for future analysis of such structures.