• 한국전자파학회논문지
• /
• 제21권4호
• /
• pp.443-451
• /
• 2010

본 논문에서는 Band-III 지상파 디지털 멀티미디어 방송 수신용 저전력 CMOS RF 튜너 칩에 대해 기술한다. 제안된 RF 튜너 칩은 저전력의 소형 휴대단말기 개발에 적합한 Low-IF 수신 구조로 설계되었으며, 174~240 MHz의 RF 방송 신호를 수신하여 1.536 MHz 대역폭의 2.048 MHz IF 신호를 출력한다. RF 튜너 칩은 저잡음 증폭기, 이미지 신호 제거 믹스, 채널 필터, LC-VCO, PLL과 Band-gap 기준 전압 생성기 등의 모든 수신부 기능 블록들을 포함하고 있으며, 0.18 um RF CMOS 기술을 이용하여 단일 칩으로 제작되었다. 또한 전력 소모를 줄이기 위한 4단계 이득 가변이 가능한 저잡음 증폭기를 제안하였으며, Schmoock's 선형화 기법과 Current bleeding 회로 등을 이용하여 수신 성능을 개선하였다. 제작된 RF 튜너 칩의 이득 제어 범위는 -25~+88 dB, 잡음 특성(NF)은 Band-III 전체 대역에서 약 4.02~5.13 dB, 선형 특성(IIP3)은 약 +2.3 dBm 그리고 이미지 신호 제거비는 최대 63.4 dB로 측정되었다. 총 전력 소모는 1.8 V 단일 전원에서 약 54 mW로 우수하며, 칩 면적은 약 $3.0{\times}2.5mm^2$이다.

• 한방비만학회지
• /
• 제9권1호
• /
• pp.15-22
• /
• 2009

Objectives The aim of this study is to review and analyze the status on the recent clinical trials of 'obesity' and 'metabolic syndrome'. Methods We search 'www.clinicaltrail.gov' for research trend of Obesity and metabolic syndrome. Search terms used were 'obesity' and 'metabolic syndrome'. In order to see detail review, searching was performed from 01, 01, 2007 to 05, 31, 2009 with intervention, phase III or phase IV, And we classified all the searched studies into design, intervention, purpose, end point, diseases and condition Results We could search total 232 trials. Of them, we found 32 trials with intervention, phase III or phase IV from 01, 01, 2007 to 05, 31, 2009 Also we could see various design of clinical trials. Conclusion To improve obesity and metabolic study in Traditional Korean Medicine, it is need to activate clinical trial, meta analysis, develope of clinical practice guidelines, co-works with conventional medicine and etc.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.310-315
• /
• 2008

The objective of design for a post flash-over fire is contain the fire and prevent structural collapse, as necessary to meet the performance requirements. In the post flash-over phase of a fire all of the combustible objects in the compartment are burning and the heat release rate is limited either by the fuel surface area or the available air supply. So for the PBD situations, the process of evaluation method for fire phenomena is very important. It is the aim of this study to investigate and analyze the evaluation method of structural fire resistance in Japan.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2003년도 추계학술대회
• /
• pp.233-240
• /
• 2003

To develop high-quality software systems satisfying the customer's needs, user-centered design (UCD) process has been emphasized in the area of human-computer interaction. And component-based development (CBD) has been extensively studied to realize a systematic software reuse, thereby reducing the time-to-market and the development cost. Balanced integration of user-centered design process and CBD process will be a promising way for successful software construction, which effectively achieves three goals: the quality of software, the cost of software development, and the time-to-market. However, traditional CBD methodology seems to lack the concept of user-centered design process and the relevant methods. This paper proposes a way of incorporating user-centered design process into a CBD methodology. Firstly, this paper gives the brief introduction of UCD. Secondly, we explain typical UCD activities and methods along the phase of systems development lifecycle and propose the use of usability maturity model (UMM) for integrating UCD activities and methods with those of CBD methodology. Finally, as a case study, we describe the results of comparing the UCD activities to the activities of MaRMI-III, which has been developed as a CBD methodology at ETRI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.284-287
• /
• 1987

In this paper, the design and implementation of a multiprocessor based Die Bonder Machine for the semiconductor will be described. This the partial research result, that is, the 1st year portion of the project to be performed for a period of two years from June, 1986 to May, 1988. The mechanical system consists of the following three subsystems : (i) transfer head unit, (ii) die feeding XY-table unit, and (iii) plunge up unit. The overall control system is designed to be essentially a master-slave type in which each slave is functionally fixed in view of software and also the time shared common bus structure with hardwired bus arbitration scheme is utilized, the control system consists of the following three subsystems each of which employs a 16 bits microprocessor MC 68000 : (i) die bonder processor controller, (ii) visual recognition/inspection and display system, (iii) the servo control system. It is reported that the proposed control system were applied to Working Sample and tested in real system, and the results are successful as a working sample phase.

• 약학회지
• /
• 제50권6호
• /
• pp.386-392
• /
• 2006

Pramlintide, a synthetic analogue of human hormone amylin, is the first of a new class of amylinomimetic compounds. Present study was undertaken to compile and analyze the clinical trials of pramlintide, and thereby to facilitate the design of the bridging study for the earlier introduction of the drug, which might be needed by diabetes patients in Korea. Sixty-two articles from Pubmed and MEDLINE search were used to analyze the trials of pramlintide along with prescribing information and New Drug Application packet obtained form the manufacturer. The efficacy of the new drug was attributed to three mechanisms: delay of gastric emptying time, inhibition of post-prandial glucagon secretion, and reduction of food intake by enhanced satiety. Clinical trials consistently identified the effectiveness of the drug for the treatment of type 1and type 2 diabetes who have failed to achieve glycemic control despite optimal therapy with insulin. However, the six pivotal Phase III clinical trials were peformed with mostly caucasian and some black and hispanic people. None of the trials documented the proportion of either Asian or Korean participants. Since Korean diabetes patients show different epidemiology and characteristics in their disease state, it appears that the bridging study of pramlintide should be designed in the level of full scale Phase III clinical trial along with pharmacokinetic and pbarmacodynamic studies.

• Smart Structures and Systems
• /
• 제33권6호
• /
• pp.399-414
• /
• 2024

This study discusses the long-term deformation monitoring and shape sensing of bridge girder surfaces with an automated extraction scheme for point clouds in the Region Of Interest (ROI), invariant to the position of a Light Detection And Ranging system (LiDAR). Advanced smart construction necessitates continuous monitoring of the deformation and shape of bridge girders during the construction phase. An automated scheme is proposed for reconstructing geometric model of ROI in the presence of noisy non-stationary background. The proposed scheme involves (i) denoising irrelevant background point clouds using dimensions from the design model, (ii) extracting the outer boundaries of the bridge girder by transforming and processing the point cloud data in a two-dimensional image space, (iii) extracting topology of pre-defined targets using the modified Otsu method, (iv) registering the point clouds to a common reference frame or design coordinate using extracted predefined targets placed outside ROI, and (v) defining the bounding box in the point clouds using corresponding dimensional information of the bridge girder and abutments from the design model. The surface-fitted reconstructed geometric model in the ROI is superposed consistently over a long period to monitor bridge shape and derive deflection during the construction phase, which is highly correlated. The proposed scheme of combining 2D-3D with the design model overcomes the sensitivity of 3D point cloud registration to initial match, which often leads to a local extremum.

• Wind and Structures
• /
• 제30권4호
• /
• pp.339-366
• /
• 2020

This study aims at modeling boundary layers (BLs) encountered in sparse and built environments (i.e. open, suburban and urban) at the subsonic Wind Tunnel (WT) at Ryerson University (RU). This WT has an insignificant turbulence intensity and requires a flow-conditioning system consisting of turbulence generating elements (i.e., spires, roughness blocks, barriers) to achieve proper turbulent characteristics. This system was developed and validated in the current study in three phases. In phase I, several Computational Fluid Dynamic (CFD) simulations of the tunnel with generating elements were conducted to understand the effect of each element on the flow. This led to a preliminary design of the system, in which horizontal barriers (slats) are added to the spires to introduce turbulence at higher levels of the tunnel. This design was revisited in phase II, to specify slat dimensions leading to target BLs encountered by tall buildings. It was found that rougher BLs require deeper slats and, therefore, two-layer slats (one fixed and one movable) were implemented to provide the required range of slat depth to model most BLs. This system only involves slat movement to change the BL, which is very useful for automatic wind tunnel testing of tall buildings. The system was validated in phase III by conducting experimental wind tunnel testingof the system and comparing the resulting flow field with the target BL fields considering two length scales typically used for wind tunnel testing. A very good match was obtained for all wind field characteristics which confirms accuracy of the system.

• Smart Structures and Systems
• /
• 제33권2호
• /
• pp.165-175
• /
• 2024

Rotating beams play a crucial role in representing complex mechanical components that are prevalent in vital sectors like energy and transportation industries. These components are susceptible to the initiation and propagation of cracks, posing a substantial risk to their structural integrity. This study presents a two-stage methodology for detecting the location and estimating the size of an open-edge transverse crack in a rotating Euler-Bernoulli beam with a uniform cross-section. Understanding the dynamic behavior of beams is vital for the effective design and evaluation of their operational performance. In this regard, modal parameters such as natural frequencies and eigenmodes are frequently employed to detect and identify damages in mechanical components. In this instance, the Frobenius method has been employed to determine the first two natural frequencies and corresponding eigenmodes associated with flapwise bending vibration. These calculations have been performed by solving the governing differential equation that describes the motion of the beam. Various parameters have been considered, such as rotational speed, beam slenderness, hub radius, and crack size and location. The effect of the crack has been replaced by a rotational spring whose stiffness represents the increase in local flexibility as a result of the damage presence. In the initial phase of the proposed methodology, a damage index utilizing the slope of the beam's eigenmode has been employed to estimate the location of the crack. After detecting the presence of damage, the size of the crack is determined using a Genetic Algorithm optimization technique. The ultimate goal of the proposed methodology is to enable the development of more suitable and reliable maintenance plans.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.184-193
• /
• 2009

In recent years, the architectural interest in the apartment design has been getting focused on qualitative improvement and design differentiation. Especially the facade design differentiation is one of the most important elements in this matter. The purpose of this study is to provide the basic informations that can be referenced when architects are dealing with exterior design by analyzed design types and characteristics of apartment entrances. Target apartment of this study was whasung dongtan the 2nd phase new city districts which was planned to solve a housing shortage in the capital region. Having examined eleven pilot districts, four 1st construction areas, and eight 2nd construction areas, - total 23 complexes - 282 apartment entrances in 212 apartment buildings were carefully researched. Apartment entrance design can be divided into 15 different design elements: design types and combination types, direction, shape, height, approach types, exterior wall finishes of entrance, exterior wall finishes of lower parts of apartment, handrail types of slope, floor finishes of slope, distribution ratio of piloti, ceiling height of piloti, floor finishes of piloti, space use of piloti, window establishment between piloti and elevator hall, landscape elements of piloti. Design characteristics of building entrances were also analyzed in 4 groups (I, II, III, IV) divided by construction contractors ranking. In conclusion, first, design types and combination types can be classified into 15 different kinds, and the group I and II tend to show wider variety of entrance combinations. Secondly, the height and volume of extrude entrance type tend to increase in the group I and II. Third, the spatial configuration of pilotis appears to show more of 'pass + store + break' rather than 'access', as we get closer to the group I.