• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.207-215
• /
• 2022

The intensity of fishy odor in eggs, which differs depending on the poultry type and individual perception, can be due to many factors including trimethylamine (TMA) which has been identified as the main. Notably, riboflavin can increase the activity of flavin-containing monooxygenase 3, the enzyme responsible for converting TMA into odorless trimethylamine-N-oxide. This study aimed to analyze the TMA content in egg yolk, evaluate its contribution to fishy odor, and develop a method to prevent this undesired odor. Solid-phase microextraction-gas chromatography/mass spectrometry was used to detect and quantify volatile compounds in egg yolk from hens fed a standard TMA-rich diet and hens fed a riboflavin-supplemented diet. To compare the relative content of volatile substances between eggs, a correlation study was performed using an electronic nose. Higher concentration of TMA (1.06 ± 0.12 mg/kg) was detected in egg yolks obtained from hens fed a normal diet than those fed a riboflavin-supplemented diet. Overall, this study suggests that riboflavin affects the quantity and quality of volatile substances, including TMA, present in eggs and we expect these findings to improve the quality and reduce the fishy odor of eggs.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.299-308
• /
• 2022

This study was conducted to predict the tendency for heat exchange and boil-off gas (BOG) in a liquefied hydrogen tank under sloshing excitation. First, athe fluid domain excited by sloshing was modeled using a multiphase-thermal flow domain in which liquid hydrogen and hydrogen gas are in the saturated state. Both the the volume of fluid (VOF) and Eulerian-based multi-phase flow methods were applied to validate the accuracy of the pressure prediction. Second, it was indirectly shown that the fluid velocity prediction could be accurate by comparing the free surface and impact pressure from the computational fluid dynamics with those from the experimental results. Thereafter, the heat ingress from the external convective heat flux was reflected on the outer surfaces of the hydrogen tank. Eulerian-based multiphase-heat flow analysis was performed for a two-dimensional Type-C cylindrical hydrogen tank under rotational sloshing motion, and an inflation technique was applied to transform the fluid domain into a computational grid model. The heat exchange and heat flux in the hydrogen liquid-gas mixture were calculated throughout the analysis,, whereas the mass transfer and vaporization models were excluded to account for the pure heat exchange between the liquid and gas in the saturated state. In addition, forced convective heat transfer by sloshing on the inner wall of the tank was not reflected so that the heat exchange in the multiphase flow of liquid and gas could only be considered. Finally, the effect of sloshing on the amount of heat exchange between liquid and gas hydrogen was discussed. Considering the heat ingress into liquid hydrogen according to the presence/absence of a sloshing excitation, the amount of heat flux and BOG were discussed for each filling ratio.

• Composites Research
• /
• v.36 no.1
• /
• pp.16-24
• /
• 2023

This paper presents a multi-scale progressive fatigue damage model incorporating the model for interfacial debonding between fibers and matrix. The micromechanics model for the progressive interface debonding was adopted, which defined the four different interface phases: (1) perfectly bonded fibers; (2) mild imperfect interface; (3) severe imperfect interface; and (4) completely debonded fibers. As the number of cycles increases, the progressive transition from the perfectly bonded state to the completely debonded fiber state occurs. Eshelby's tensor for each imperfect state is calculated by the linear spring model for a damaged interface, and effective elastic properties are obtained using the multi-phase homogenization method. The fatigue damage evolution formulas for fiber, matrix and interface were proposed to demonstrate the fatigue behavior of CFRP laminates under cyclic loading. The material parameters for the fiber/matrix fatigue damage were characterized using the chaotic firefly algorithm. The model was implemented into the UMAT subroutine of ABAQUS, and successfully validated with flat-bar UD laminate specimens ([0]₈,[90]₈, [30]₁₆) of AS4/3501-6 graphite/epoxy composite.

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.377-386
• /
• 2023

The effect of different commercially available bedding materials on the growth performance and carcass characteristics of ducks for 42 days was investigated. 336 one-day-old White-Pekin ducklings (60.48 ± 0.16 g) were randomly allocated into 24-floor pens with one of the three beddings namely i) coco peat, ii) rice husks, or iii) sawdust. 14 ducklings per pen and 8 replicate pens per bedding material were used. Birds were fed a starter diet from days 1-21 and a grower diet from days 22-42. Weekly growth performance evaluation was conducted for the average body weight, weight gains, daily feed intake, and feed conversion efficiency. One bird per pen was sacrificed on day 42 for the evaluation of carcass characteristics including the carcass, breast, and leg muscle percentages. Breast and leg muscle samples were then collected and analyzed for their proximate and pH values. Higher body weights (p < 0.05) were noticed with rice husks on day 42 only. Improved daily gains (p < 0.05) were also noticed for birds raised with rice husks over the entire period (days 1-42). Concerning feed intake, higher values (p < 0.05) were similarly noted with rice husks for the grower phase (days 22-42), and the entire experimental period (days 1-42). Marginally improved feed intake values were also noted with the use of rice husks as the bedding materials on day 42 (p = 0.092). Improved feed efficiency (p < 0.05) was noticed with rice husks on day 35, the grower period, and the entire 42-day period. However, no significant differences were noticed for most of the carcass characteristics that were evaluated. Nevertheless, higher (p < 0.05) pH values for the breast muscle were noticed with the use of coco peat and sawdust as the bedding. Conclusively, the bedding type could have a significant impact on the growth performance of ducks without adverse effects on carcass characteristics. The use of rice husks as bedding might be advantageous and is therefore recommended.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.27-35
• /
• 2023

Purpose: Hallux valgus (HV) is one of the most common chronic foot disorders, occurring when the first toe deviates laterally toward the other toe. HV impairs muscle strength and affects gait function (postural sway and gait speed). Thus, this study aims to investigate using the FDM system the effect of wearing braces on gait while wearing a virtual reality (VR) device. Methods: This study was conducted on 28 healthy adults with HV of 15 degrees or more. To compare differences in walking, depending on whether a toe brace can be worn, the subject walked without wearing anything, walked after wearing the VR device, and walked after wearing the VR device and the toe brace, and the FDM system was used for the gait ability measurement analysis. Results: As a result of a one-way repeated analysis of variance, the walking speed-related variables (cadence, velocity, etc.) in the HV group were higher during comfortable walking. In addition, walking while wearing a VR device and walking while wearing a VR device and a toe brace demonstrated more significant values in terms of six gait parameters (double stance phase, loading response, stage, stage, stage, and stage). The maximum pressure of the forefoot was significantly reduced when walking while wearing a VR device and a toe brace compared to comfortable walking, but in all variables, there was no statistically significant difference between walking while wearing a VR device and walking while wearing a VR device and a toe brace. Conclusion: Orthosis with a VR device during gait (OVG) and gait with a VR device (GVR) affect gait in HV patients. However, there was no significant difference between GVR and OVG. Thus, it is necessary to conduct experiments on various HV angles and increase the duration of wearing the toe brace.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.525-549
• /
• 2022

The process of biological invasion is led by the dynamics of a population as a demographic and evolutionary unit. Spatial structure can affect the population dynamics, and it is worth being considered in research on biological invasion which is always accompanied by dispersal. Metapopulation theory is a representative approach to spatially structured populations, which is chiefly applied in the field of ecology and evolutionary biology despite the controversy about its definition. In this study, metapopulation was considered as a spatially structured population that includes at least one subpopulation with significant extinction probability. The early phase of the invasion is suitable to be analyzed in aspects of the metapopulation concept because the introduced population usually has a high extinction probability, and their ecological·genetic traits determining the invasiveness can be affected by the metapopulation structure. Although it is important in the explanation of the prediction of the invasion probability, the metapopulation concept is rarely used in ecological research about biological invasion in Korea. It is expected that applying the metapopulation theory can supply a more detailed investigation of the invasion process at the population level, which is relatively inadequate in Korea. In this study, a framework dividing the invasive metapopulation into long- and middle-distance scales by the relative distance of movement to the natural dispersal range of species is proposed to easily analyze the effect of a metapopulation in real cases. Increased understanding of the mechanisms underlying invasions and improved prediction of future invasion risk are expected with the metapopulation concept and this framework.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.250-261
• /
• 2023

In this study, the noise contributions by the duct, stator and rotor, which are the propulsor components, are evaluated to identify the flow noise source in cavitation and non-cavitation conditions on pumpjet propulsion and the noise levels in both conditions are compared. The unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equation based on the homogeneous mixture assumption is applied on the suboff submarine hull and pumpjet propeller in the cavitation tunnel, and the Volume of Fluid (VOF) method and Schnerr-Sauer cavitation model are used to describe the two-phase flow. Based on the flow simulation results, the acoustic analogy formulated by Ffowcs Williams and Hawkings (FW-H) equation is applied to predict the underwater radiated noise. The noise contributions are evaluated by using the three types of impermeable integral surface on the duct, stator and rotor, and the two types of permeable integral surface surrounding the propulsor. As a result of noise prediction, the contribution by the stator is insignificant, but it affects the generation of flow noise source due to flow separation in the duct and rotor, and the noise is predominantly radiated into the upward and right where the flow separations are. Also, the noise is radiated into the thrust direction due to pressure fluctuation between suction and pressure sides on the rotor blades, and the it can be seen that the cavitation effect into the noise can be considered through the permeable integral surface.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.248-253
• /
• 2023

Most offshore platforms utilize chain mooring systems for position keeping. However, information regarding related design modification processes is scarce in literature. This study focuses on the floating liquefied natural gas (LNG) bunkering terminal (FLBT) as the target of shore platform and analyzes the corresponding initial mooring design and model tests via numerical simulations. Subsequently, based on the modified design conditions, a new mooring system design is proposed. Adjusting the main direction of the mooring line bundle according to the dominant environmental direction is found to significantly reduce the mooring design load. Even turret-moored offshore platforms are exposed to beam sea conditions, leading to high mooring tension due to motions in beam sea conditions. Collinear environmental conditions cannot be considered as design conditions. Mooring design loads occur under complex conditions of wind, waves, and currents in different environmental directions. Therefore, it is essential appropriately assign the roll damping coefficients during mooring analysis because the roll has a significant effect on mooring tension.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.227-240
• /
• 2016

This study aims to examine how visitors in science centers interact with gesture-based exhibits from embodied cognition perspectives. Four gesture-based exhibits in two science centers were selected for this study. In addition, we interviewed a total of 14 visitor groups to examine how they perceived the property of gesture-based exhibit. We also interviewed four experts to further examine the benefits and limitations of the current gesture-based exhibits in science centers. The research results indicate that the total amount of interaction time between visitors and gesture-based exhibits was not high overall, implying that there was little of visitors' immersive engagement. Both experts and visitors expressed that the current gesture-based exhibits tend to highlight the novelty effect but little obvious impacts linking gestures and learning. Drawing from the key findings, this study suggests the following design considerations for gesture-based exhibits. First, to increate visitor's initial engagement, the purpose and usability of gesture-based exhibits should be considered from the initial phase of design. Second, to promote meaningful interaction, it is important to sustain visitors' initial engagement. For that, gesture-based exhibits should be transformed to promote intellectual curiosity beyond simple interaction. Third, from embodied cognition perspectives, exhibits design should reflect how the mappings between specific gestures and metaphors affect learning processes. Lastly, this study suggests that future gesture-based exhibits should be designed toward promoting interaction among visitors and adaptive inquiry.