• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.613-619
• /
• 2014

A flare system is a very important system that crucially affects on the process safety in chemical plants. If a flare system is designed too small, it cannot prevent catastrophic accidents of a chemical plant. On the other hand, if a flare system is designed too large, it will waste resources. Therefore, reasonable relief load estimation has been a crucial issue in the industry. American Petroleum Institute (API) suggests basic guidelines for relief load estimation, and a lot of engineering companies have developed their own relief load estimation methods that use an unbalanced heat and material method. However, these methods have to involve lots of conservative assumptions that lead to an overestimation of relief loads. In this study, the new design procedure for a flare system based on dynamic simulation was proposed in order to avoid the overestimation of relief loads. The relief load of a deethanizer process was tested to verify the performance of the proposed design procedure.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.1
• /
• pp.95-104
• /
• 2018

Biosurfactants or microbial surfactants are surface-active biomolecules that are produced by a variety of microorganisms. Biodegradability and low toxicity have led to the intensification of scientific studies on a wide range of industrial applications for biosurfactants in the field of environmental bioremediation as well as the petroleum industry and enhanced oil recovery. However, the major issues in biosurfactant production are high production cost and low yield. Improving the bioindustrial production processes relies on many strategies, such as the use of cheap raw materials, the optimization of medium-culture conditions, and selecting hyperproducing strains. The present work aims to obtain a mutant with higher biosurfactant production through applying mutagenesis on Bacillus subtilis SPB1 using a combination of UV irradiation and nitrous acid treatment. Following mutagenesis and screening on blood agar and subsequent formation of halos, the mutated strains were examined for emulsifying activity of their culture broth. A mutant designated B. subtilis M2 was selected as it produced biosurfactant at twice higher concentration than the parent strain. The potential of this biosurfactant for industrial uses was shown by studying its stability to environmental stresses such as pH and temperature and its applicability in the oil recovery process. It was practically stable at high temperature and at a wide range of pH, and it recovered above 90% of motor oil adsorbed to a sand sample.

• Korean Journal of Clinical Laboratory Science
• /
• v.44 no.1
• /
• pp.17-23
• /
• 2012

This study is assessed the urinary hippuric acid (HA) concentration in toluene-exposed workers. Toluene is widely used in the coating, printing, painting and petroleum industries. We analyzed the hippuric acid level of toluene-exposed workers (males: 198, females: 63) from 2008 to 2010 and examined the relationship between hippuric acid and the characteristics of their work. The measurements of the urinary hippuric acid were confirmed by high-performance liquid chromatography. Among the subjects, males had on average more work experience than females (males: 9.17 years, females: 4.45 years), but females showed a higher hippuric acid concentration levels than males (males: 0.26 g/L, females: 0.75 g/L). The mean of the HA concentration according to the age group was 0.19 g/L in 30's, 0.30 g/L in 40's, 0.54 g/L in 50's, 1.36 g/L in 60's. Those in their 60's had the highest concentration. The mean of HA concentration according to the type of work was 0.70 g/L for the coating, 0.52 g/L for the painting, and 0.16 g/L for the printing industries, revealing that the workers in the coating industry had the highest concentration. By the highest order, the mean of HA concentration by working period was as follows; less than 5 years, ${\leq}5\;years{\sim}<10\;years$. The factors that influence the HA concentration are not only how long one is exposed to toluene but also the type of work, worker's age, and their gender.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.65-70
• /
• 2001

As consumption rate of energy increase rapidly, the facilities of fuel storage tank become large size. Almost all of the industry or public facilities storing fuel in underground fuel storage tank is manufactured by steel materials. Thus, this fuel storage tank made of steel materials is damaged by stray-current corrosion, it become destruction. If fuel storage tank is destructed, petroleum, oil and gas are leaked. So it bring about environmental pollution, energy loss, fire and explosion. Therefor, in this study, for study on the prevention of corrosion damage in underground fuel storage tank, it were investigated by corrosion and stray-current corrosion for SS 400 in dry sea sand and wet sea sand along to specific resistance. The main results obtained are as follows : As specific resistance decrease in wet sea sand, corrosion rate per year increase linearly, in case of back fill up wet sea sand in underground fuel storage tank, if the water is flow into dry sea sand, corrosion tendency of underground fuel storage tank is supposed sensitive.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.50-56
• /
• 2005

Liquefied Petroleum 6aso-PG) is combustible gas which used for fuel for domestic and automobiles. A research for adjust a component of LPG to improve the fuel characteristics and control the manufacturing process of that is carrying in petrochemical industry. Some kinds of LPG blending is considered as a adjusting method to control component of LPG. LPG is mainly propane for domestic use and butane for automobile use but propylene and butylene also a kind of LPG Change of explosion characteristic and combustion gas component by mixing of propylene in propane and butane was measured and analysed in this research. Based on the result of experiment, it was found that explosion pressure and pressure rise rate was slightly increased with mixing rate of propylene and it was considered the possibility of increasing the CO concentration in combustion gas with increase the mixing rate of propylene.

• Journal of the Korean Institute of Gas
• /
• v.13 no.2
• /
• pp.49-56
• /
• 2009

This thesis suggests ways for ensuring the safety of domestic autogas (liquefied petroleum gas) vehicles by conducting comparison and analysis on the status of market diffusion and safety management scheme in foreign countries as well as in Korea. According to the result of the survey on the status of domestic autogas safety management, the national scheme to secure the safety of autogas vehicles seems neither well-organized nor sufficiently-controlled. Actually, the gas leakage check-ups conducted for 5,000 autogas cars revealed that about 4 percent of them had leakage problems. As a result, it was acknowledged that the autogas safety regulations being operated in advanced countries need to be selectively introduced for the domestic autogas industry. Consequently, in line with the recent permission to use autogas as a fuel for subcompact cars etc., this thesis is recommending some methods to enhance the safety management scheme for autogas cars such as the amendment of facility regulations including the ventilation of underground parking lots, mandatory attachment of labels claiming autogas cars and indicating periodical inspections etc.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.469-474
• /
• 2019

One of the world's major resources is crude oil, the most fundamental part of the industry. There is no place that does not use crude oil. Petroleum refining products and chemical production industrial products are produced through nearby petrochemical complexes and ports after importing crude oil. There would be a possible relationship among the petrochemical complexes and nearby regional ports working with liquid cargoes. To confirm these relations, Ulsan Port, Daesan Port, and Yeosu Gwangyang Port were selected for this study. A Vector Auto Regressive model using time series data was applied. A Unit Root Test was performed. The relationship was confirmed through the Granger and Toda Yamamoto Causality Test.

• Journal of Environmental Science International
• /
• v.20 no.12
• /
• pp.1617-1624
• /
• 2011

Caustic (NaOH) solution is used to remove $H_2S$ from hydrocarbon streams in petroleum refining industry, gradually being, so called, spent sulfidic caustic (SSC) which has high levels of $H_2S$ and alkalinity. Thus, SSC can be used as an electron donor and a buffering agent for autotrophic denitrification. As SSC, however, contains some non-biodegradable organics, air stripping was conducted to remove the non-biodegradable organics. As a result, over 93 % of the non-biodegradable organics was removed within 30 min of aeration. Then, $Na_2S_2O_3{\cdot}5H_2O$, methanol and organic matters, which are produced from a biodiesel production plant, were added to reform the air-stripped SSC and their products being referred to new sulfidic caustics (NSCs) I, II and III, respectively. Thereafter, to investigate the effect of these products on the removal of COD and TN, these products were injected to a biological nitrogen removal (BNR) process, resulting in additional 44 % TN removal without noticeable increase in the effluent COD level. Therefore, it can be said that the BNR process is a promising option to treat NSC as demonstrated in this study whose results can be useful for developing resource recovery technologies.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.213-220
• /
• 2019

The dry cleaning effect related to the type of soil and fiber was analyzed using silicone and alcohol-based solvents(ethyl alcohol, isopropyl alcohol, acetone) that are relatively safe for the human body and environment to improve the detergency of hydrophilic soils in dry cleaning system. Based on this analysis, an effective dry cleaning method to be carried out for improving the detergency according to the type of hydrophilic soils. After dry cleaning was performed using 20 types of artificial soiled fabrics consisting of 7 types of fibers and 4 types of hydrophilic soils, the detergency was measured and the results were compared and analyzed by solvents and fiber types. The results are presented as follows; first, the detergency of hydrophilic soils using silicone solvents showed a low rate of detergency. In particular, the tannin soil showed a lower level of detergency compared to the protein soil. Second, the detergency of hydrophilic soils using silicon solvents with dry soap differed in some detergency according to the soil and fiber types. Especially, the detergency of curry soil on cotton fabric showed significant improvement. Third, the protein soil was not removed from dry cleaning using alcohol-based solvents, but the effect of dry cleaning of curry soil on both cotton and polyester fabric was substantially improved. As a result, the elimination of blood soil is more effective in silicon solvents than in alcohol-based solvents. The removal of tannin soils may improve detergency by adding dry soap to silicon solvents or by using alcohol-based solvents as alternative solvents. The use of alternative solvents such as silicon and alcohol solvents can contribute to the environmental improvement of the dry cleaning industry, which uses petroleum-based solvents. It is also expected to provide consumers with the opportunity to choose eco-friendly and efficient dry cleaning methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.763-771
• /
• 2014

Recently, a huge amount of sulfur has been produced as a byproduct of petroleum refining processes in Korea. Sulfur concrete is made of modified sulfur binder instead of cement paste, which has advantages of reducing $CO_2$ emission from cement industry as well as utilizing surplus sulfur. Also, sulfur concrete is a sustainable material that can be repetitively recycled. In this study, the physical properties of sulfur concrete are experimentally investigated. From the test results, sulfur concrete showed compressive strengths higher than at least 50MPa. Also, the unit weight, modulus of elasticity and splitting tensile strength of sulfur concrete was similar to that of Portland cement concrete (PCC). The coefficient of thermal expansion of sulfur concrete was a little larger than that of Portland cement concrete and sulfur concrete with mineral filler is helpful to lower the coefficient of thermal expansion. recycled aggregate sulfur concrete resulted in a slight reduction in the compressive strength, but sulfur concrete with recycled aggregate can achieve the high strength characteristics.