• Membrane Journal
• /
• v.7 no.2
• /
• pp.65-74
• /
• 1997

Pervaporation pilot tests for obtaining the anhydrous ethanol, which is an automobile fuel additive for reducing air pollution, were carried out in the production field of fermented ethanol by using a PVA composite membrane. In the pervaporation dehydration of the ethanol/water azeotropic mixture, the membrane performance is concluded to be enhanced with the heating temperature of feed. In the determination of the permeate condensation temperature from the viewpoint of energy cost, an Optimal temperature was found to be near $0{\circ}C$. The results on the dehydration of fermented ethanol were similar to those of synthetic ethanol, which indicates that the pervaporation performance is not influenced by impurities contained in the ethanol to be dehydrated. From a comparison of calculated energy needed in the system and measured value in the pilot test, it is confirmed that the latent heat for vaporization of permeant on the permeate side of membrane is supplied from the feed.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.698-703
• /
• 1998

The pervaporation experiments of aqueous solutions of trichloroethylene (TCE) and chlorobenzene (CB) through the silicone rubber (polydimethylsiloxane, PDMS) membrane were carried out and the effect of concentration polarization on the separation characteristics was investigated. The resistance-in-series model was used to explain the boundary layer resistance. It was clear that the concentration polarization phenomenon had a significant effect on the permeation behavior in the pervaporation separation of the trace organic chlorides from aqueous solutions. With the same membrane thickness, the permeation of TCE, which has a stronger affinity for the PDMS, appeared to be more influenced by the boundary layer resistance than that of CB. The effect of boundary layer resistance was reduced and the membrane resistance became dominant with increasing membrane thickness at a given hydrodynamic condition. The separation factor was increased to approach the intrinsic separation factor of the membrane with its thickness.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.62-64
• /
• 1996

Chitin, which is obtained mainly from the cuticle of a marine crustacean, has recently aroused great interest in its industrial and biomedical applications. Chitosan, deacetylated form of chitin, appears to be more useful for biomedical application and dehydration of aqueous solutions than chitin, since it has both hydroxyl and amino groups that can be modified easily. Amino groups on chitosan reacts with dialdehyde to form a Schiff base and then crosslinked, and can be easily neutralized with sulfuric acid and metal ions. Polyfunctional metal ions can form a metal-polyelectrolyte complexes with chitosan. Membranes used in modules so far working in industrial pervaporation plants are generally of composite type. This composite membrane was prepared by coating a porous polysulfone ultrafiltration membrane support of definite structure with a thin, dense layer of permselective chitosan. To apply industrial scale pervaporation process for dehydration of aqueous ethanol and isopropanol, chitosan composite membranes were prepared and tested at various conditions.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.34-42
• /
• 2005

In this work, a practical separation performance was investigated on aqueous alcohol solutions, especially for iso-propyl alcohol (IPA), which is usually used during the semi- conductor rinsing process. The removal of various substances from waste aqueous IPA solutions was carried out by microfiltration with $0.1\~1{\mu}$m pore size of mean diameter as a pre-filter. Permeability and molecular weight cut-off of the functional polysulfone(PSf) ultrafiltration membrane to purify waste aqueous IPA solutions were measured through the ultrafiltration test. The solute rejection of PSf membrane had $92\%$ in 1,000ppm aqueous PEG solution with PEG molecular weight 10,000, the molecular weight cut-off had 10,000. The IPA concentration on the $CMPA-K^+$ membrane performance using pervaporation module system could be increased from $95.04 wt\%$ to more than $98.50wt\%$ in about 9hr at operation temperature of $70^{\circ}C$ using the pervaporation module system.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.61-67
• /
• 2005

Zeolite membranes show better thermal, mechanical, chemical stabilities than polymer membranes. Water was separated from water/ethanol mixtures by pervaporation using the NaA and the NaY zeolite membranes synthesized in our laboratory. The effects of concentration of ethanol at the feed side and temperature were studied on the permeation flux and separation factor of water. The separation factors obtained with the NaA zeolite membrane was found to be 1000 times higher than those obtained with the NaY. However, the water flux through the NaA zeolite membrane was observed to be lower than 1/2 of that through the NaY zeolite membrane.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.163-171
• /
• 2003

For the pervaporation of water-ethanol mixtures, new composite membranes having poly(acrylic acid)-poly (butyl methacrylate-co-methyl methacrylate) interpenetrati ng polymer network [PAA-P(BMA-co-MMA) IPN] skin layer supported on porous and crosslinked poly(BMA-co-MMA) were prepared. The morphology of the sub-layer of the composite membrane prepared in the presence of 60 wt% solvent showed cellular structure, on the other hand that of sublayer prepared in the presence of 70 wt% solvent presented very porous interconnected pore structure with macrovoids. Permeation rates of the composite membranes were largely influenced by the morphology of the sublayer. Separation factors increased with the increase of the degree of crosslinking of the PAA network. It was found that permeation rates could be increased by introducing anionic charges on carboxyl groups of the PAA. The permeation rate changes of the PAA-P(BMA-co-MMA) IPN composite membranes according to the feed compositions showed quite similar pattern with the swelling behavior in water-ethanol mixtures.

• Membrane Journal
• /
• v.4 no.1
• /
• pp.57-62
• /
• 1994

This study uses pervaporation process to separate small amount of organic trichloroethylene, chloroform and perchloroethylene from contaminated water, since chlorinated hydrocarbones are known to be cancer suspecting compounds. For the separation of small amount of halogenated organic compound dissolved in wastewater, pervaporation membranes should be polymers that possess affinity with orgnic compounds and hydrophobicity. We used polyisobutylene, polyetheramide and polydimethylsiloxane membranes. The degree of affinity between organics and polymers were measured by contact angle method. We had good separation results that separation factor ranged from 34 to 19100 and permeate flux was$19.7~140g/m^2hr$.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.353-360
• /
• 2019

ZSM-5 membrane was prepared on tubular macroporous ${\alpha}$-alumina support using a different synthesis route. The effects of organic template agent and Si/Al ratio of the synthesis gel on morphology, structure, and separation performance of the ZSM-5 membrane used for dehydration of isopropanol were investigated. High water perm-selectivity ZSM-5 membrane with a thickness of about $3.0{\mu}m$ and a low Si/Al ratio of 10.1 was successfully prepared from organotemplate-free synthesis gel with a molar composition of $SiO_2$ : $0.050Al_2O_3$ : $0.21Na_2O$ : NaF : $51.6H_2O$ at $175^{\circ}C$ for 24 h. The ZSM-5 membrane exhibited high pervaporation performance with a flux of $3.92kg/(m^2{\cdot}h)$ and corresponding separation factor of higher than 10,000 for dehydration of 90 wt.% isopropanol/water mixture at $75^{\circ}C$.

• Membrane and Water Treatment
• /
• v.10 no.6
• /
• pp.441-449
• /
• 2019

In this study, cellulose acetate (CA) / nylon66 (NYL66) (95/5) blend membranes with different thicknesses were prepared by a solvent evaporation method. The effects of membrane thickness (almost $7-25{\mu}m$), feed concentration (70-95 wt.% isopropanol), and feed temperature ($30-60^{\circ}C$) were investigated on the performance of membrane in the separation of isopropanol-water mixtures. With regard to the results of sorption experiments, it was found that the increase of feed temperature enhanced the overall sorption while by increasing feed concentration, the overall sorption passed through a maximum value at 70 wt. % isopropanol (IPA). The best separation factor 3080.51 was gained at high isopropanol concentration 95 wt.%, low feed temperature $30^{\circ}C$, and high membrane thickness $24.62{\mu}m$. Regarding the pervaporation separation index, the obtained results showed that proper values for the thickness of membrane, feed temperature, and isopropanol concentration in feed were $24.62{\mu}m$, $40^{\circ}C$, and 70 wt.%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.826-837
• /
• 2015

In this study, we produced bioethanol from the original hydrolysate obtained during oxalic acid pretreatment of lignocellulosic biomass. The bioethanol was separated and concentrated by pervaporation and the residue after pervaporation was evaluated for its antioxidant activity. Xylose ($37.28g/{\ell}$) was the major product in the original hydrolysate. The original hydrolysate contained acetic acid, furfural and total phenolic compounds (TPC) as fermentation inhibitors. Acetic acid was removed by electrodialysis (ED), and $12.21g/{\ell}$ of bioethanol was produced from ED-treated hydrolysate. The TPC of ethyl acetate extracts from the residue obtained (OA-E) during pervaporation was 86.81 mg/100 g (extract). The $IC_{50}$ values of DPPH and ABTS radical scavenging activities, and reducing power of OA-E were $0.87mg/m{\ell}$, $0.85mg/m{\ell}$, and $0.59mg/m{\ell}$, respectively. Sugar degradation products and the phenolic compounds in OA-E were determined by GC-MS.