• 한국전자파학회논문지
• /
• 제15권4호
• /
• pp.428-435
• /
• 2004

최근 이동단말기의 급속한 보급과 발전에 의하여, 통상의 시가지에서의 전자파전파의 특성을 해명해야할 뿐만 아니라, 시가지, 산림, 계곡 등의 외부 공간과 실내 공간 등의 종래에는 전파불감지대로 불려오던 공간에 있어서도 안정적으로 통신을 이용할 수 있는 무선통신환경 개선의 중요성이 높게 요구되고 있다. 더욱이, 이동통신의 디지털화와 더불어 건물 등에 의한 반사에 의해서 생기는 멀티패스에 기인하는 수신펄스의 시간지연이 고속디지털통신의 장해가 되고 있다. 이러한 도심 시가지에 대한 전자파전파의 특성을 보다 정도 높게 추정하기 위해서는 건물 벽면의 구조 및 간판 등의 영향도 고려 대상으로 포함시킬 필요성이 있다. 본 연구에서는, 먼저 무선통신환경에서의 시가지, 산림, 해면, 빌딩 벽면 등의 문제를 규칙적 및 불규칙조면(random rough surface)에 의한 산란문제로 취급하여 그 특성을 상세히 파악하고자 한다. 실제 문제에 있어서도 간판과 같은 빌딩의 부착물, 창, 테라스 등과 같은 규칙적 벽면 구조 또는 불규칙적 벽면 구조를 가지고 있는 경우가 일반화되어 있는 실정이다. 따라서 본 논문에서는 FVTD(finite volume time domain)법을 적용하여 기초적인 자료 보완을 위하여 3분류에 의한, 즉 주기적 구조에 의한 산란 특성, 불규칙적 구조에 의한 산란 특성, 주기적 및 불규칙의 복합형구조에 의한 2차원 전파환경 모델들에 대한 산란 특성을 조사하였다. 특히 주기적 벽면구조에 대한 Bragg reflection의 영향을 조사하였다.

• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.53-66
• /
• 1990

산악의 영향을 받는 지역에서 비정상성 평균을 사용하는 G.C.모델에 의하여 총강우량의 우량곡면을 구성하였다. 구성된 우량곡면에 2차원 프리에 해석을 실시하여 강우의 주기성분을 분리하였다. 강우의 지엽성분, 즉 강우잔차는 우량곡면에서 주기성분을 제거하여 얻은 강우잔차를 균일한 무작위장의 표본함수라고 가정해서 이 무작위장의 특성을 자기상관함수로 나타냈다. 자기상관함수를 변환하여 스팩트럼 밀도를 구했고, 이 결과를 토대로 한강, 금강유역의 환상스팩트럼 분포함수의 모델을 제안했다.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.130-138
• /
• 1995

Machined graphite/epoxy surfaces were studied by using SEM (Scanning Electron Microscopy), surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and multidirectional laminate composite. The surface roughness and profile are found to be highly depdndent on the fiber layup direction and the measurement direction. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters $R_{a}$ without $D_{y}$(Maximum Damage Depth) region and $D_{y}$are better descriptors of the machined laminate composite surface than commonly used roughness parameters $R_{a}$and $R_{max}$ The characteristics of surface profiles in laminate composite are well represented in CPD (Cumulative Probability Distribution) plot and PPD (Percentage Probability Density) plot. Edge-trimmed multidirectional laminate surfaces are Gaussian and random for profiles measured along the tool movement direction, they are periodic and non-Gaussian in the direction perpendicular to the tool movement.t.ent.t.

• Current Photovoltaic Research
• /
• 제5권3호
• /
• pp.75-82
• /
• 2017

High efficiency thin film solar cells require an absorber layer with high absorption and low defect, a transparent conductive oxide (TCO) film with high transmittance of over 80% and a high conductivity. Furthermore, light can be captured through the glass substrate and sent to the light absorbing layer to improve the efficiency. In this paper, morphology formation on the surface of glass substrate was investigated by using HF, mainly classified as random etching and periodic etching. We discussed about the etch mechanism, etch rate and hard mask materials, and periodic light trapping structure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.344-347
• /
• 2007

For modeling the non-periodic and randomly scattered powder particles, the quasi-random multi-particle array is introduced. The multi-scale process simulation, which enables to formulate a regression model with a response surface method, is performed by employing a homogenization method. The size of ${Al_2}{O_3}$ particle, amplitude of cyclic compaction pressure, and friction coefficient are considered as optimal process parameters. The optimal conditions of process parameters providing the highest relative density are finally found by using the grid search method.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.275-279
• /
• 2016

This is a brief review on light trapping in Si based thin film solar cells with textured surfaces and transparent conducting oxide front electrodes. The light trapping scheme appears to be essential in improving device efficiency over 10%. As light absorption in a thin film solar cells is not sufficient, light trapping becomes necessary to be effectively implemented with a textured surface. Surface texturing helps in the light trapping, and thereby raises short circuit current density and its efficiency. Such a scheme can be adapted to single junction as well as tandem solar cell, amorphous or micro-crystalline devices. A tandem cell is expected to have superior performance in comparison to a single junction cell and random surface textures appears to be preferable to a periodic structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.574-578
• /
• 2004

In this paper, a nonlinear feedback system is analyzed for a surface micromachined resonant accelerometer. For this, a brief illustration of the plant dynamics is given. In the analysis, the periodic signal in the nonlinear feedback loop is obtained by the limit cycle point, which is best approximated via the describing function method. Considering the characteristic feature of plant dynamics, a simple phase shifted relay with finite slope is designed for the nonlinearity implementation. With a describing function for random plus sinusoidal input, we analyzed the effect of a white Gaussian noise on oscillation frequency. Finally, simulation and experimental result is given.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.315-321
• /
• 2017

Antireflective pyramid arrays can be readily obtained via anisotropic etching in alkaline solution (KOH, NaOH), which is widely used in crystalline-Si (c-Si) solar cells. The periodic inverted pyramid arrays show even lower light reflectivity because of their superior light-trapping characteristics. Since this inverted pyramidal structures are mostly achieved using very complex techniques such as photolithograpy and laser processes requiring extra costs, here, we demonstrate the Cu-nanoparticle assisted chemical etching processes to make the inverted pyramidal arrays without the need of photolithography. We have mainly controlled the concentration of $Cu(NO_3)_2$, HF, $H_2O_2$ and temperature as well as time factors that affecting the reaction. Optimal inverted pyramid structure was obtained through reaction parameters control. The reflectance of inverted pyramid arrays showed < 10% over 400 to 1100 nm wavelength range while showing 15~20% in random pyramid arrays.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.359-370
• /
• 2021

Joint roughness is combination of primary and secondary roughness. Ordinarily primary roughness is a geostatistical part of a joint surface that has a periodic nature but secondary roughness or unevenness is a statistical part of that which have a random nature. Using roughness generating algorithms is a useful method for evaluation of joint roughness. In this paper after determining geostatistical parameters of the joint profile, were presented two roughness generating algorithms using Mount-Carlo method for evaluation of primary (GJRGAP) and secondary (GJRGAS) roughness. These based on geostatistical parameters (range and sill) and statistical parameters (standard deviation of asperities height, SDH, and standard deviation of asperities angle, SDA) for generation two-dimensional joint roughness profiles. In this study different geostatistical regions were defined depending on the range and SDH. As SDH increases, the height of the generated asperities increases and asperities become sharper and at a specific range (a specific curve) relation between SDH and SDA is linear. As the range in GJRGAP becomes larger (the base of the asperities) the shape of asperities becomes flatter. The results illustrate that joint profiles have larger SDA with increase of SDH and decrease of range. Consequencely increase of SDA leads to joint roughness parameters such Z2, Z3 and RP increases. The results showed that secondary roughness or unevenness has a great influence on roughness values. In general, it can be concluded that the shape and size of asperities are appropriate parameters to approach the field scale from the laboratory scale.