Browse > Article
http://dx.doi.org/10.12989/gae.2021.24.4.359

Geostatistical algorithm for evaluation of primary and secondary roughness  

Nasab, Hojat (Department of Mining Engineering, Shahid Bahonar University of Kerman)
Karimi-Nasab, Saeed (Department of Mining Engineering, Shahid Bahonar University of Kerman)
Jalalifar, Hossein (Department of Oil Engineering, Shahid Bahonar University of Kerman)
Publication Information
Geomechanics and Engineering / v.24, no.4, 2021 , pp. 359-370 More about this Journal
Abstract
Joint roughness is combination of primary and secondary roughness. Ordinarily primary roughness is a geostatistical part of a joint surface that has a periodic nature but secondary roughness or unevenness is a statistical part of that which have a random nature. Using roughness generating algorithms is a useful method for evaluation of joint roughness. In this paper after determining geostatistical parameters of the joint profile, were presented two roughness generating algorithms using Mount-Carlo method for evaluation of primary (GJRGAP) and secondary (GJRGAS) roughness. These based on geostatistical parameters (range and sill) and statistical parameters (standard deviation of asperities height, SDH, and standard deviation of asperities angle, SDA) for generation two-dimensional joint roughness profiles. In this study different geostatistical regions were defined depending on the range and SDH. As SDH increases, the height of the generated asperities increases and asperities become sharper and at a specific range (a specific curve) relation between SDH and SDA is linear. As the range in GJRGAP becomes larger (the base of the asperities) the shape of asperities becomes flatter. The results illustrate that joint profiles have larger SDA with increase of SDH and decrease of range. Consequencely increase of SDA leads to joint roughness parameters such Z2, Z3 and RP increases. The results showed that secondary roughness or unevenness has a great influence on roughness values. In general, it can be concluded that the shape and size of asperities are appropriate parameters to approach the field scale from the laboratory scale.
Keywords
joint roughness; classification; geostatistical method; generation algorithm; JRC;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Asadi, M.S., Rasouli, V. and Barla, G. (2012), "A bonded particle model simulation of shear strength and asperity degradation for rough rock fractures", Rock Mech. Rock Eng., 45(5), 649-675. https://doi.org/10.1007/s00603-012-0231-4.   DOI
2 Atapour, H. and Moosavi, M. (2014), "The influence of shearing velocity on shear behavior of artificial joints", Rock Mech. Rock Eng., 47(5), 1745-1761. https://doi.org/10.1007/s00603-013-0481-9.   DOI
3 Babanouri, N. and Karimi-Nasab, S. (2015), "Modeling spatial structure of rock fracture surfaces before and after shear test: A method for estimating morphology of damaged zones", Rock Mech. Rock Eng., 48(3), 1051-1065. https://doi.org/10.1007/s00603-014-0622-9.   DOI
4 Babanouri, N., Nasab, S.K. and Sarafrazi, S. (2013), "A hybrid particle swarm optimization and multi-layer perceptron algorithm for bivariate fractal analysis of rock fractures roughness", Int. J. Rock Mech. Min. Sci., 60, 66-74. https://doi.org/10.1016/j.ijrmms.2012.12.028.   DOI
5 Barton, N. and Choubey, V. (1977), "The shear strength of rock joints in theory and practice", Rock Mech., 10(1-2), 1-54. https://doi.org/10.1007/BF01261801.   DOI
6 Chen, S.J., Zhu, W.C., Yu, Q.L. and Liu, X.G. (2016), "Characterization of anisotropy of joint surface roughness and aperture by variogram approach based on digital image processing technique", Rock Mech. Rock Eng., 49(3), 855-876. https://doi.org/10.1007/s00603-015-0795-x.   DOI
7 Fathi, A., Moradian, Z., Rivard, P., Ballivy, G. and Boyd, A.J. (2016), "Geometric effect of asperities on shear mechanism of rock joints", Rock Mech. Rock Eng., 49(3), 801-820. https://doi.org/10.1007/s00603-015-0799-6.   DOI
8 Fecker, E. (1978), "Geotechnical description and classificatioin of joint surfaces", B. Int. Assoc. Eng. Geol., 18(1), 111-120. https://doi.org/10.1007/BF02635356.   DOI
9 Grasselli, G. (2001), "Shear strength of rock joints based on quantified surface description", Ph.D. Thesis, Swiss Federal Institute of Technology Lausanne, Lausanne, Switzerland.
10 Grasselli, G. and P. Egger (2003), "Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters", Int. J. Rock Mech. Min. Sci., 40(1), 25-40. https://doi.org/10.1016/S1365-1609(02)00101-6.   DOI
11 Gravanis, E. and Pantelidis, L. (2019), "Determining of the joint roughness coefficient (JRC) of rock discontinuities based on the theory of random fields", Geosciences, 9(7), 295. https://doi.org/10.3390/geosciences9070295.   DOI
12 He, Z.M., Xiong, Z.Y., Hu, Q.G. and Yang, M. (2014), "Analytical and numerical solutions for shear mechanical behaviors of structural plane", J. Central South Univ., 21(7), 2944-2949. https://doi.org/10.1007/s11771-014-2261-4.   DOI
13 Huan, J.Y., He, M.M., Zhang, Z.Q. and Li, N. (2019), "A new method to estimate the joint roughness coefficient by back calculation of shear strength", Adv. Civ. Eng. https://doi.org/10.1155/2019/7897529.   DOI
14 Kulatilake, P.H.S.W., Um, J. and Pan, G. (1998), "Requirements for accurate quantification of self-affine roughness using the variogram method", Int. J. Solids Struct. 35(31-32), 4167-4189. https://doi.org/10.1016/S0020-7683(97)00308-9.   DOI
15 Mechanics, I.S.F.R. (1978), Suggested Methods for the Quantitative Description of Discontinuities in Rock Masses, Pergamon Press.
16 Le, H.K., Huang, W.C., Liao, M.C. and Weng, M.C. (2018), "Spatial characteristics of rock joint profile roughness and mechanical behavior of a randomly generated rock joint", Eng. Geol., 245, 97-105. https://doi.org/10.1016/j.enggeo.2018.06.017.   DOI
17 Lotfi, M. and Tokhmechi, B. (2019), "Fractal-wavelet-fusionbased re-ranking of joint roughness coefficients", J. Min. Environ., 10(4), 1121-1133. https://doi.org/10.22044/JME.2019.7489.1614.   DOI
18 Matheron, G. (1963), "Principles of geostatistics", Econ. Geol., 58(8), 1246-1266. https://doi.org/10.2113/gsecongeo.58.8.1246.   DOI
19 Park, J.W., Lee, Y.K., Song, J.J. and Choi, B.H. (2013), "A constitutive model for shear behavior of rock joints based on three-dimensional quantification of joint roughness", Rock Mech. Rock Eng., 46(6), 1513-1537. https://doi.org/10.1007/s00603-012-0365-4.   DOI
20 Rasouli, V. and Harrison, J. (2010), "Assessment of rock fracture surface roughness using Riemannian statistics of linear profiles", Int. J. Rock Mech. Min. Sci., 47(6), 940-948. https://doi.org/10.1016/j.ijrmms.2010.05.013.   DOI
21 Tatone, B.S. and Grasselli, G. (2010), "A new 2D discontinuity roughness parameter and its correlation with JRC", Int. J. Rock Mech. Min. Sci., 47(8), 1391-1400. https://doi.org/10.1016/j.ijrmms.2010.06.006.   DOI
22 Walck, C. (1996), Hand-book on Statistical Distributions for Experimentalists.
23 Zhao, L., Zhang, S., Huang, D., Zuo, S. and Li, D. (2018), "Quantitative characterization of joint roughness based on semivariogram parameters", Int. J. Rock Mech. Min. Sci., 109, 1-8. https://doi.org/10.1016/j.ijrmms.2018.06.008.   DOI
24 Wang, M., Chen, Y.F., Ma, G.W., Zhou, J.Q. and Zhou, C.B. (2016), "Influence of surface roughness on nonlinear flow behaviors in 3D self-affine rough fractures: Lattice Boltzmann simulations", Adv. Water Resour., 96, 373-388. https://doi.org/10.1016/j.advwatres.2016.08.006.   DOI
25 Wittke, W. (2014), Rock Mechanics based on an Anisotropic Jointed Rock Model (AJRM), John Wiley & Sons.
26 Yong, R., Gu, L., Ye, J., Du, S.G., Huang, M., Hu, G. and Liu, J. (2019), "Neutrosophic function with nns for analyzing and expressing anisotropy characteristic and scale effect of joint surface roughness", Math. Prob. Eng. https://doi.org/10.1155/2019/8718936.   DOI