• 한국주거학회논문집
• /
• 제26권6호
• /
• pp.139-146
• /
• 2015

In this study, the plane type of main building relics of unified Silla period house site which excavated in Gyeongju city after 1990s was classified and the architectural characteristic of them was investigated. The chronology of building relics in Silla capital city site was mostly known as 8-9th century, and by standard of column arrangement, the plane types of them could be classified as grid type, front veranda-grid type, outer column type. The outstanding characteristic of plane is wide span and open front veranda. In most relics the span were over 4 meters, and inner foundations for small post and strip foundation were found between columns. The front veranda added type buildings were composited of enclosed main room and open front veranda, and column arrangement of them dose not fall into line in most case. Thus it thought that the structures of enclosed main room and open front veranda were independent. The interior space of enclosed main room were divided two rooms by partition wall in some case. In this case, one room is enclosed by wall, and the other room has open front side. This plane is considered for the pleasant life in cold winter and hot summer.

• 대한치과교정학회지
• /
• 제36권5호
• /
• pp.369-379
• /
• 2006

본 연구는 수직적 안모유형에 따른 치료 후 교합평면 변화양상을 조사하여 향후 적절한 치료계획과 기전의 설정에 도움이 되고자 시행하였다. 골격성 I급 부정교합으로 진단되어 비발치로 치료받은 성민 60명(남자 28명, 여자 32명)을 대상으로 하였으며, Ricketts법의 facial axis, facial depth, mandibular plane angle, lower face height, mandibular arc의 5개 항목을 이용하여 한국 성인의 정상교합자 통계치의 기준에 따라 short face type (1군), average face type (2군), long face type (3군)으로 분류하였다. 각 군의 치료 전, 치료 종료, 종료 후 1년의 측모두부 방사선사진 계측치를 비교 분석하였다. 1군은 치료 종료 시와 비교하여 유지기간에 일반적 교합평면각, 기능적 교합 평면각, L6/L1, MP-L6 항목이 유의하게 감소하였고(p < 0.01) L1-FOP 항목은 유의하게 증가하였다(p < 0.001). 2군은 유지기간에 유의한 변화를 보이지 않았으며 3군은 유지기간에 기능적 교합평면각이 유의하게 증가하였다(p < 0.05). 기능적 교합평면각의 치료 후 변화량은 각 군 간에 유의한 차이를 보였으며 특히, 1군과 3군 간에 매우 큰 유의성을 보였다. 따라서 치아의 압하, 정출 및 치료 후 전치부 피개 등에 있어 유지기간 중 교합평면각 변화의 고려가 필요하다고 생각된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.328-332
• /
• 1993

Single overload tests are carried out for SS41. Specimens are used hollow type and solid type that stress condition prevail plane stress and plane strain at surface crack. According to the crack initiation and propagation period, single overload applies to three regime and overload ratios change into 1.5, 2.0. Crack retardation zones at initation range aren't different in both specimens respectively, however at propagation range come into large scale in hollow specimen. Delayed load cycles come into large scale in solid type. And the more the overload ratio increase, the larger the retardation zone increase but the magnitude doesn't exactly equal to the expected from the overload ratio.

• 한국공간구조학회논문집
• /
• 제6권3호
• /
• pp.43-50
• /
• 2006

This paper is concerned with the natural periods of ambient vibration and eigenvalue analysis. Ambient vibration tests were conducted to four bearing-wall reinforced concrete buildings ranging from twelve to nineteen stories. The performance of modeling in eigenvalue analysis was investigated using consideration of rigidity out of the plane in the slab and the non-structural bearing wall. Measured natural period was also compared with the value by the KBC2005. Natural period of the short direction in eigenvalue analysis is well fitted with the measured one. In the other hand, Natural period of the long direction in eigenvalue analysis is slightly more overestimated than the measured one. Natural period of the long direction in eigenvalue analysis was found to be enhanced by considering the effect of the stiffness out of the plane of the slab and non-structural wall in the structural modeling.

• 헤리티지:역사와 과학
• /
• 제37권
• /
• pp.151-168
• /
• 2004

미륵사지 서탑은 현존하는 국내 최대 규모의 석탑이다. 현재까지 연구 진행된 결과에 따르면 미륵사지 서탑은 9층 석탑으로 추정되고 있다. 대규모의 건축물임에도 불구하고 이 탑에 대한 직접적인 창건 기록이 아직 발견되지 않은 상태다. 다만 미륵사의 창건기사가 "삼국유사(三國遺事), 무왕조(武王條)"에 연기설화로 나타나 있을 뿐이다. 설화적인 역사의 기록은 사실성에 대한 규명에 있어 다양한 분야에서의 연구가 필요하다. 건축사적 측면에서 평면형식의 시대 위치에 대한 고찰은 탑의 창건 연대 규명에 하나의 가시적 근거를 제공할 수 있다. 나아가서 미륵사지 서탑의 양식과 계통사 연구에 근간이 된다고 판단하여 수행코자 한다. 목조번안 석탑으로도 유명한 미륵사지 서탑은 우리나라 석탑의 시원적인 성격을 지니고 있다고 그동안의 연구에서 밝혀져 있다. 우리나라 불탑은 인도에서 발생되어 중국을 거쳐 도입되었다. 국내에서는 미륵사지 서탑보다 앞선 시기의 유례를 볼 수 없는 상태이므로 중국의 실 예를 참고하여 접근해 보고자 했다. 본 고에서는 한국(韓國)과 중국(中國)의 전석탑(塼石塔) 평면의 시대별 변천과정을 고찰하여 미륵사지 서탑의 평면형식이 7세기 초에 위치함을 결론으로 도출하였다.

• Archives of Plastic Surgery
• /
• 제35권5호
• /
• pp.545-552
• /
• 2008

Purpose: The transaxillary approach for breast augmentation has been advocated for patients and surgeons for several decades. However, this blind technique had many disadvantages including, traumatic dissection, difficult hemostasis, displacement of implants, and ill-defined asymmetrical location of inframammary crease. In the present study, the precise endoscopic electrocautery dissection was applied to eliminate the limits of blunt dissection throughout the procedures. Methods: From December 2006 to December 2007, a total of 103 patients with an average age of 29.5 years underwent endoscopic assisted transaxillary dual plane augmentation mammoplasty. The mean implant size was 243 cc with the range between 150 and 350 cc. Through a 4 cm axillary incision, electrocautery dissection for submuscular pockets was carried out under the endoscopic control. The costal origin of pectoralis muscle was completely divided to expose subcutaneous tissue and to make type I dual plane. Results: Using the endoscopic dissection, we achieved good aesthetic results including a short recovery period, less morbidity, and symmetrical well-defined inframammary crease. Type I dual plane procedure could support the consistent inframammary fold shape and be applied to most patients without breast ptosis. Minor complications did not occur, however, four major complications of capsular contracture occurred. Conclusion: In contrast to the era of the blind techniques, endoscopic assisted transaxillary dual plane breast augmentation can now be performed effectively and reproducibly. With Its advantage, the axillary application of endoscopy for augmentation mammaplasty is useful to achieve the optimal cosmetic outcomes.

• 대한치과교정학회지
• /
• 제25권3호
• /
• pp.273-286
• /
• 1995

안면골 성장유형에 따른 두개안면골의 성장양상의 차이를 조사하기 위하여 정상교합자 남자 19명 여자 14명으로 부터 8.5세에서 18.5세까지 10년 동안에 걸쳐 촬영한 연속 두부방사선규격사진을 분석 조사하였다. 이 조사에서 안면골 성장유형은 최초 8.5세에서 10년 후인 18.5세 사이의 Y-axis의 총변화량을 기준으로 Drop, Neutral, Forward군으로 구분하였다. 각 군에서 안면 각 부위의 변화를 계측 분석하여 각 유형의 10년간 성장양상의 차이를 조사한 결과는 다음과 같이 요약할 수 있었다. 본 연구에 사용된 대상에서 두개안면골 성장양상의 분포는 Neutral군이 52%, Forward군이 27%, Drop군이 21%로 나타났다. 두개저에 대한 상,하악골익 전방성장은 Forward군이 Drop군에 비해 크게 나타났으며 Neutral군과 Forward군에서 상악에 비해 하악의 전방성장이 크게 나타났다. FH plane에 대한 palaltal plane의 기울기는 연구기간 동안 Forward군이 다른 두 군에 비해 전상방으로 경사되면서 성장하였다. 또한 하악평면은 Forward군이 Drop군에 비해 반시계 방향의 회전이 크게 나타났으며 이런 경향은 남자가 여자보다 크게 나타났다. 하악체부(Go-Me)의 길이 성장은 Drop군이 Forward, Neutral군에 비해 작게 나타났다 본 연구에서 안면골의 성장에 관하여 길이 및 각도적 계측치는 각기 다양하게 나타났으나 수직적 비율의 특성은 각 군에서 비교적 일관성 있게 유지되는 경향을 나타내었다. 이상의 분석자료를 이용하여 교정진단시 개개인의 성장양상을 평가하기 위하여 8.5세에서 18.5세까지 성장유형별 Profilogram을 작성 제시하였다.

• 대한정형도수물리치료학회지
• /
• 제14권2호
• /
• pp.1-15
• /
• 2008

Purpose : This survey was to investigate on the effect of each region changed in trunk through sagittal plane after Trunk Flexion-Extension Exercise. Methods : 18 students of Gimcheon College participated in this study for the period of July 9-30, 2007. Analyzed factor were 1) degree of pain 2) presence of Gillet test and 3) difference of right-left for 7 landmark region in trunk applying I.B.S.-2000 after Trunk Flexion - Extension Exercise. We used the SPSS $PC^+$ program for classifying into analysis of frequency, $x^2$-test, t-test and Simple Linear Regression analysis test. Results: Followings are concluded For degree of pain, 13(72.2%) of students answered "No pain" after Trunk Flexion-Extension Exercise and in the result 4 more students decreased the pain. In the Gillet test, 14(77.8%) of students answered "positive" after Trunk Flexion-Extension Exercise and in the result 4 more students increased mobility of Sacroiliac joint. In the differences of right-left for 7 landmark region in trunk by B.M.I. scale, Slim type was decreased both Acromion(0.45mm), both Iliac crest(0.44mm), and both ASIS(0.31mm) to anterior plane, Normal type was decreased both inferior angle of Scapular(0.02mm), both L4-5(0.07mm), and both PSIS(0.09mm) to posterior plane Fatness type was decrease both Acromion(0.05mm), both ASIS(0.05mm) to anterior plane. In the differences of right-left for 7 landmark region in trunk for degree of pain No pain group was decreased both Acromion(0.17mm), both Nipple(0.25mm) to anterior plane and both PSIS(0.13mm) to posterior plane Pain group was decreased both Acromion(0.04mm), both Iliac creast(0.03mm) to anterior plane and both inferior angle of Scapular(0.18mm) both PSIS(0.13mm) to posterior plane. In the difference of right-left for 7 landmark region in trunk for each of the exercises, Both iliac crest(0.1mm), both ASIS(0.12mm) to anterior plane were decreased after Flexion Trunk Exercise. Both acromion(0.27mm) to anterior plane, both inferior angle of scapular(0.14mm) and both PSIS(0.12mm) to posterior plane were decreased after Extension Trunk Exercise. Each of the exercises, The both inferior angle of Scapular showed high scores($0.65{\pm}0.23$) at Trunk Extension Exercise group and there was statistical significance between Trunk Flexion Exercise group and Extension exercise group(t :-2.502, p < 0.05). 7. At Pre-exercise group, Both inferior angle of Scapular showed low scores($0.23{\pm}8.27$) at Trunk Extension Exercise group and there was statistical significance between Pre- Exercise group and Trunk Extension Exercise group(t :-2.5430, p<0.05). Conclusion : The simple linear regression analysis was presented at Acromion(-0.243), L4-5(-0.753), PSIS(0.576) and there was statistical significance in BMI scale(p<0.01).

• 한국재료학회지
• /
• 제19권8호
• /
• pp.447-451
• /
• 2009

The long-period stacking order (LPSO) structures and stacking faults (SFs) in rapidly solidified powder metallurgy (RS P/M) $Mg_{97}Zn_1Y_2$ alloy were investigated by high resolution transmission electron microscopy (HRTEM) observations. The 18R-type LPSO structure with a stacking sequence of ACBCBCBACACACBABAB and a period of 4.86 nm was observed in the as-extruded RS P/M $Mg_{97}Zn_1Y_2$ alloy. After annealing at 773 K for 5 hr, the 18R-type LPSO structure was transformed to the 14H-type LPSO structure with a stacking sequence of ABABABACBCBCBC and a period of 3.64 nm. The 24R-type LPSO structure containing 24 atomic layers of ABABABABCACACACABCBCBCBC with period of 6.18 nm coexists with the 14H-type LPSO structure in the same grains. The LPSO structures contain intrinsic Type II SFs such as BCB/CABA and ABA/CBCB stacking sequences of a closely packed plane.

• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.17-25
• /
• 2004

Hull girder stress monitoring system for container ship uses four long-base-strain-gages at mid-ship to monitor the resultant stresses and the applied moment components of horizontal, vertical and torsional moments. The bending moments are estimated by using the conventional strain-moment relations, however, the torsional moment related to the warping strain requires the assumption of the shape of torsional moments over the hull girder. Though this shape could be a sine function with an adequate period, it largely depends upon certain empirical formulas. This paper introduces additional four long-base-strain-gages at mid-ship to derive the longitudinal slope of the warping strain because this slope is directly related to the torsional moment by Bi-moment concept. An open-channel-type cantilever beam has been selected as a simplified model for container ship and the result has proved that the suggested concepts can estimate the torsional component accurately. Finally this method can become reliable technique to derive all external moments in hull girder stress monitoring system for container ships.