Kim, Eui-Hwan;Choi, Eun-Soo;Nam, Duck-Hyun;Kim, Sung-Sup;Chung, Jae-Wook;Kim, Tae-Whan
Korean Journal of Applied Biomechanics
/
v.18
no.1
/
pp.213-226
/
2008
E. H. KIM, E. S. CHOI, D, H. NAM, S. S. KIM, J. W. CHUNG and T. W. KIM, The Instrumenfal Development for Pulling . Reaping Training & Measuring in Judo.Korean Jiurnal of Sport Biomechanics, Vol. 18, No. 1, pp. 213-226, 2008. The purpose of this study was to develop a judo-doll uke(partner : doll-uke) for training and measurement applicable to pulling, pushing and reaping in judo. In Judo the most common techniques consist of the pulling, pushing and sweep which all need to be practiced with a partner. So the research needs to develop a measurement system that can be used to evaluate the forces involved with these techniques. Also the Doll-Uke must be developed so that judokas can train alone. After the manufacture of Doll-Uke the usefulness of it must be evaluated. The height of a Doll-Uke is l70cm and its weight is 50kg. Doll-Uke was developed with a trunk angle of 55 and the lower extremities of an angle of 45. The Doll-Uke can also measure the forces developed during the pulling, pushing and sweep. Due to the ability of the system to measure the forces while preforming Judo techniques feedback can be provided to the Judokas to improve their performance.
Active carbon which has the smallest bulk and wet density was found as the best support media among 4 different kinds of materials(celite, natural zeolite, Pusuk stone, active carbon) to make a proper fluidized-bed with small energy consumption. Its minimum and optimum fluidization velocity were found as 0.03cm/sec and 0.25cm/sec, respectively. As organic loading rate for methane fermentation was increased, CODcr removal efficiencies of all the media were decreased. But, CODcr, removal efficiencies of active carbon was maintained more than 90% in this experimental range of the organic loading rate. Larger amount of microorganism was adsorbed on the active carbon which has very high specific surface area. At the organic loading rate of 16g CODcr,/l day, its adsorbed cell mass was 157mg/g. Comparing natural zeolite with roast celite, adsorbed cell mass did not increase in proportion to specific surface area of the media. Even though roast celite has the same specific surface area as the Pusuk stone, its organic removal ability was superior to that of the Pusuk stone, which explains that the relatively great surface roughness and the positive surface charge are important for cell adsorption. It was concluded that the support media for anaerobic fluidized reactor should have small wet density and small fuidization velocity, if possible, in order to increase cell adsorption by reducing the fluid shear stress.
The purpose of this study is to investigate the relationship between home economics teachers' characteristics and middle school students' affective morality through Home Economics Instruction. The affective morality of middle school students after taking home economics classes were assessed and investigated as to what sorts of affective morality there were and to find out what level they were. further, what factors affected the affective morality of middle school students considering the variable factors of home economics teachers. 800 first year male and female students of 17 middle schools located in Cheonju and Cheongwon were selected through non-random or accessible sampling. The frequency, precent, mean and standard deviation, correlation, t-test, and one-way ANOVA, and multiple regression of these data were obtained by using the SPSS 10.0 for Windows Program. The result of this study were as follows: First, basic etiquette was the most important rated the highest among the affective morality, nature preservation turned out the lowest in each questionnaire. Learned in home economics, it was considered the highest goal; Second, in terms of character and affective morality of middle school students, male students ranked higher than female students and the students with a better academic performance record, and those who engaged in club activities showed better results in affective morality as did students with religious beliefs and students with better educated parents and also students from homes with better financial situations. Third, in terms of students' perception of home economics teachers with a good nature turned out the highest, teaching ability and career awareness and also reflected at the same level. Fourth, students' perception of home economics teachers' characteristics and their affective morality are honed out correlated with each other. The correlation of home economics teachers' career awareness and compassion${\cdot}$devotion${\cdot}$service morality proved to be the highest. Fifth, the affective morality of those students who do community service, club activities and those who are interested in home economics and who respect home economics teachers tended to be high.
This study analyzed the structural elements of transformational leadership on hotel employees job satisfaction and organizational identification, and inquired into how moderating variables such as demographical characteristics and the features of hotels affect transformational leadership. The ultimate purpose of this study was to provide managerial implications to hotel business operators and hotel employees. The main results of this study are as follows; According to the result of factor analysis on transformational leadership and hotel employees job satisfaction, 18 variables were derived as two factors 'obliging leadership' & 'vision leadership' factor in the area of transformational leadership, and 31 variables were derived as four factors 'welfare and work environment', 'ability display and job stability', 'colleague relationship and job performance' and 'company policy' factor. Second, stepwise regression analysis on whether the type of transformational leadership at hotels has a significant effect on employees job satisfaction & organizational identification, 'vision leadership' and job satisfaction and the both 'vision leadership' & 'obliging leadership' among the types of transformational leadership appeared to have a significant effect on hotel employees organizational identification. Third, One-Way ANOVA and t-test in order to examine significant difference in the type of transformational leadership according to demographical characteristics and general characteristics, statistically significant difference was found according to income level, the current position, work experience, the type of hotel operation and the experience of job change.
Park, Ju-Hee;Seol, Jeong-Hwan;Lee, Jun Jae;Lee, Seung-Pyo;Lim, Young-Jun
Journal of Dental Rehabilitation and Applied Science
/
v.34
no.2
/
pp.104-115
/
2018
Purpose: The purpose of this study is to evaluate the image acquisition ability of intraoral scanners by analyzing the comprehensiveness of scanned images from standardized model, and to identify problems of the model. Materials and Methods: Cast models and 3D-printed models were prepared according to international standards set by ISO12836 and ANSI/ADA no. 132, which were then scanned by model scanner and two different intraoral scanners (TRIOS3 and CS3500). The image acquisition performance of the scanners was classified into three grades, and the study was repeated with varying surface conditions of the models. Results: Model scanner produced the most accurate images in all models. Meanwhile, CS3500 showed good image reproducibility for angled structures and TRIOS3 showed good image reproducibility for rounded structures. As for model ingredients, improved plaster model best reproduced scan images regardless of the type of scanner used. When limited to 3D-printed model, powdered surface condition resulted in higher image quality. Conclusion: When scanning structures beyond FOV (field of view) in standardized models (following ISO12836 and ANSI/ADA 132), lack of reference points to help distinguish different faces confuses the scanning and matching process, resulting in inaccurate display of images. These results imply the need to develop a new standard model not confined to simple pattern repetition and symmetric structure.
The purpose of this research was to investigate the descriptive evaluation method that focuses on the problem solving process of the student. The goal was to evaluate the students' understanding of the subject rather than the students' ability to find the final answer. The descriptive evaluation is being suggested as a way of examining the thought process of the student by performing a structured analysis of the problem solving process. Today, there are not enough descriptive evaluation resources available for teachers to effectively carry out this alternative assessment method in the elementary school mathematics curriculum. This research is a case study on the development of resources for descriptive evaluation in grade 4 mathematics. We designed the development process for descriptive evaluation and its rubric for all 8 units of the 4-Na level of mathematics in the elementary school curriculum. Three descriptive problems were developed for each of the 8 units for a total of 24 problems. The rubric consisted of three areas of assessment, 1) understanding of the problem, 2) problem solving, and 3) mathematical communication. The problems were first pilot tested in two 4th grade classes. Modified problems were then tested in a different 4th grade classroom. The study showed that the three defined areas of evaluation framework (problem understanding, problem solving and mathematical communication) were measurable and analyzable using the developed grading rubric. We then conclude that he descriptive evaluation could be used as an effective tool for improving teacher performance in elementary school mathematics.
An, Hyun;Ko, Seong-Jin;Kang, Se-Sik;Kim, Dong-Hyun;Kim, Chang-Soo;Kim, Jung-Hoon
Journal of radiological science and technology
/
v.35
no.3
/
pp.201-210
/
2012
This study aimed to look at servant leadership that general radiotechnologist perceive from the servant leadership perspective and based on this to suggest ways to improve not only organizational effects of radiotechnologist who work clinically but also their working conditions. A population of 290 radiotechnologist who work at hospital in Pusan was the subject of this study and a survey was conducted to them. The analysis for the collected data used SPSS/PC+Win13 version and one-way, ANOVA was carried out to verify differences between groups. Servant leadership according to background factors showed relatively higher values among unmarried than married, twenties or more in terms of age, and nuclear medicine department in terms of the work department than other groups. Regular positions in terms of work types and university hospitals in terms of hospital types showed high scores, and as the motive for being a radiotechnologist, many considered job prospects. Hospitals should improve the organization's ability and performance by managing human resources efficiently. According to this study, servant leadership that radiotechnologist serve the community based on true prestige with basic honesty and trust as a member of fair community is a new model of true leadership that the future society requires.
In the past most major accidents resulted in death, but today there is a dramatic increase in the number of people who survive such accidents but who are left with permanent injury. Particularly, children who are inquisitive about their surroundings but immature in their ability to assess danger, are more vulnerable to accidents and their causes as well as to determine attitudes towards prevention. The main objective of the study was to assess the effectiveness of using an accident prevention manual for accident for accident prevention education. The study was a quasi-experimental study using a questionnaire format. The subjects of the study were 393 mothers of children attending six day care centers in Seoul. Data collection was done between May 1 and June 15, 1997. The tools used for the study were a questionnaire developed the researchers and a manual for accident prevention. The collected data were analyzed using SPSS. The results of the study are as follows: 1. Types of accidents included stabbing, bums, falls from heights, choking, falls on slippery surfaces, traffic accidents, drowning, poisoning, and electrical shock in that order of frequency. 2. The main causes of accidents in children were from cosmetics and household medications. 3. The most frequent locations of accidents in the home were the bathroom, kitchen, and stairways in that order. 4. For $90.4\%$ of children safety seats were not used when the ridding in a car. 5. In examining the parents' accident prevention practices, it was found that many parents used only . one electrical outlet for many appliances, tending to overload the electricity lines and that they were not practically concerned bout the flammability of children's pajamas, indicating a less than positive attitude towards fire prevention. 6. The parents had not provided their children with any instruction on accident prevention or on what to do after an accident had occurred. 7. After the use of pamphlet in an accident prevention education program, it was found that there was a statistically significant difference in the degree to which children carried out safety measures (t=14.96, p=.000) and in their safety habits (t=-1.67, p<.1) indicating an effectiveness in this method of education. The results of this study showed that there are many things in a child's environment that can cause accidents and that the possibility of an accident occurring is high. So nurses looking after children should be aware of the need for safety education to prevent accidents in the home and plan to provide appropriate educational material to help parents with this education.
The problems current robotic technology education class has are the students with different basic background knowledge levels and the class based on the instructional teaching method. This study shows the implementation of the student teams achievement divisions (STAD) learning model into an introductory robotic technology education class to resolve the problems in the current robotic technology class. The STAD learning model focuses on the ability of each team member with different knowledge levels and make team members help each other through class activities such as assignments and a project. All members get rewarded by their performance output as a team in a course grade. The outputs of STAD learning models were measured by paired sample t-test as pre-test and post-test in terms of students's transition on basic knowledge for robotic technology, students' attitudinal transition on teaching robotic technology class, and students' competencies and self-efficacy on related subject areas. The study participants were 22 pre-service technology teachers at a university. The results show that all four measured areas were improved significantly, compared to pre-test with respect to the means scores of each measurement area. The STAD learning model could be an alternate for the current robotic technology class to deliver the better class outcomes for students under the specific circumstances.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.2
/
pp.828-834
/
2013
In this paper, TMC (Tracker Motion Controller) as one of the many research methods for condensing efficiency improvements can be condensed into efficient solar system configuration to improve the power generation efficiency of the castle with Concentrated solar silicon and photovoltaic systems (CPV)experiments using PV systems. Microprocessor used on the solar system, tracing the development of solar altitude and latitude of each is calculated in real time. Also accept the value from the sensor, motor control and communication with the central control system by calculating the value of the current position of the sun, there is a growing burden on the applicability. Through the way the program is appropriate for solar power systems and sensors hybrid-type algorithm was implemented in the ARM core with built-in TMC, Concentrated CPV system compared to the existing PV systems, through the implementation of the TMC in the country's power generation efficiency compared and analyzed. Sensor method using existing experimental results Concentrated solar power systems to communicate the value of GPS location tracking method hybrid solar horizons in the coordinate system of the sun's azimuth and elevation angles calculated by the program in the calculations of astronomy through experimental resultslook clear day at high solar irradiation were shown to have a large difference. Stopped after a certain period of time, the sun appears in the blind spot of the sensor, the sensor error that can occur from climate change, however, do not have a cloudy and clear day solar radiation sensor does not keep track of the position of the sun, rather than the sensor of excellence could be found. It is expected that research is constantly needed for the system with ongoing research for development of solar cell efficiency increases to reduce the production cost of power generation, high efficiency condensing type according to the change of climate with the optimal development of the ability TMC.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.