• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1303-1313
• /
• 2014

Dynamic behavior of the harmonic detection part of an active power filter (APF) has an essential role in filter compensation performances during transient conditions. Instantaneous power (p-q) theory is extensively used to design harmonic detectors for active filters. Large overshoot of p-q theory method deteriorates filter response at a large and rapid load change. In this study the harmonic estimation of an APF during transient conditions for balanced three-phase nonlinear loads is conducted. A novel fuzzy instantaneous power (FIP) theory is proposed to improve conventional p-q theory dynamic performances during transient conditions to adapt automatically to any random and rapid nonlinear load change. Adding fuzzy rules in p-q theory improves the decomposition of the alternating current components of active and reactive power signals and develops correct reference during rapid and random current variation. Modifying p-q theory internal high-pass filter performance using fuzzy rules without any drawback is a prospect. In the simulated system using MATLAB/SIMULINK, the shunt active filter is connected to a rapidly time-varying nonlinear load. The harmonic detection parts of the shunt active filter are developed for FIP theory-based and p-q theory-based algorithms. The harmonic detector hardware is also developed using the TMS320F28335 digital signal processor and connected to a laboratory nonlinear load. The software is developed for FIP theory-based and p-q theory-based algorithms. The simulation and experimental tests results verify the ability of the new technique in harmonic detection of rapid changing nonlinear loads.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.802-807
• /
• 2015

In this study, we synthesized a new biocatalyst consisting of glucose oxidase (GOx), polyethyleneimine (PEI) and carbon nanotube (CNT) with addition of terephthalaldehyde (TPA) (TPA/GOx/PEI/CNT) for fabrication of glucose sensor that shows improved sensing ability and stability compared with that using other biocatalysts. Main bonding of the new TPA/GOx/PEI/CNT catalyst is formed by Aldol condensation reaction of functional end groups between GOx/PEI and TPA. Such formed bonding structure promotes oxidation reaction of glucose. Catalytic activity of TPA/GOx/PEI/CNT is evaluated quantitatively by electrochemical measurements. As a result of that, large sensitivity value of $41{\mu}Acm^{-2}mM^{-1}$ is gained. Regarding biosensor stability of TPA/GOx/PEI/CNT catalyst, covalent bonding formed between GOx/PEI and TPA prevents GOx molecules from becoming leaching-out and contributes improvement in biosensor stability. With estimation of the biosensor stability, it is found that the TPA/GOx/PEI/CNT catalyst keeps 94.6% of its initial activity even after three weeks.

• KIEAE Journal
• /
• v.3 no.2
• /
• pp.37-44
• /
• 2003

The aim of this study was to analyze the thermal performance through Test-Cell of TI-wall in domestic climate. This study was carried out as follows: 1) The TI-wall was studied for ability to reduce heat loss through the building envelope and analyzed to TIM properties. 2) Test models of TI-wall were designed through the investigation of previous paper and work, measured for winter and spring, and the thermal effects were analyzed. The type of the TIM used in test model is small-celled(diameter 4mm and thickness 50mm) capillary and cement brick(density $1500kg/m^3$) was used by thermal mass. 3) Test-cell of TI-wall was calibrated from measured data and the dynamic simulation program ESP-r 9.0. In these simulations, the measured climate conditions of TaeJon were used as outdoor conditions, and the simulation model of Test-cell was developed. 4) The sensitivity analysis is executed in various aspects with standard weather files and ESP-r 9.0, and then most suitable system of TI-wall are predicted. Finally, The suitable system of TI-wall was analysed according to sizes of air gap, kinds, thickness, and the surface absorption of therm wall. The result is following. In TI-wall, Concrete is better than cement brick, at that time the surface absorption is 95%, and the most efficient thickness is 250mm. As smaller of a air gap, as reducer of convection heat loss, it is efficient for heating energy. However, ensuring of a air gap at least more than 50mm is desirable for natural ventilation in Summer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1098-1107
• /
• 2011

As recent integration of wire and wireless networks and the convergence of telecommunications and broadcasting, uniform and standardized by the broadcasting operators of existing stations to provide 4A(Any-time, Any-where, Any-device, Any-contents) services for the next-generation of multimedia services research is being progressed. Demand for theses next-generation multimedia services to ensure video compression coding technology, as well as mobility, ability to operation a variety of devices, characteristics and performance of user network and the status and conditiion, user preferences and context-awareness based on the technology has an interest in technical studies. In this paper, the current internet environment, SVC(Scalable Video Coding) encoded by a mixture of multicast and overlay multicast transmission technology for broadcasting services by designing and efficient multimedia broadcasting system is proposed. In addition, ACK-Aow Optimization by overlay multicast scheme existing tree-based overlay multicast, and by comparing the effectiveness of the proposed algorithm is demonstrated.

• Journal of Information Processing Systems
• /
• v.3 no.2
• /
• pp.43-53
• /
• 2007

The use of agent paradigm in today's applications is hampered by the security concerns of agents and hosts alike. The agents require the presence of a secure and trusted execution environment; while hosts aim at preventing the execution of potentially malicious code. In general, hosts support the migration of agents through the provision of an agent server and managing the activities of arriving agents on the host. Numerous studies have been conducted to address the security concerns present in the mobile agent paradigm with a strong focus on the theoretical aspect of the problem. Various proposals in Intrusion Detection Systems aim at securing hosts in traditional client-server execution environments. The use of such proposals to address the security of agent hosts is not desirable since migrating agents typically execute on hosts as a separate thread of the agent server process. Agent servers are open to the execution of virtually any migrating agent; thus the intent or tasks of such agents cannot be known a priori. It is also conceivable that migrating agents may wish to hide their intentions from agent servers. In light of these observations, this work attempts to bridge the gap from theory to practice by analyzing the security mechanisms available in Aglet. We lay the foundation for implementation of application specific protocols dotted with access control, secured communication and ability to detect tampering of agent data. As agents exists in a distributed environment, our proposal also introduces a novel security framework to address the security concerns of hosts through collaboration and pattern matching even in the presence of differing views of the system. The introduced framework has been implemented on the Aglet platform and evaluated in terms of accuracy, false positive, and false negative rates along with its performance strain on the system.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.601-607
• /
• 2007

In order to maintain constant residual chlorine in sedimentation basin, It is necessary to develop real time prediction model of residual chlorine considering water treatment plant data such as water qualities, weather, and plant operation conditions. Based on the operation data acquired from K water treatment plant, prediction models of residual chlorine in sediment basin were accomplished. The input parameters applied in the models were water temperature, turbidity, pH, conductivity, flow rate, alkalinity and pre-chlorination dosage. The multiple regression models were established with linear and non-linear model with 5,448 data set. The corelation coefficient (R) for the linear and non-linear model were 0.39 and 0.374, respectively. It shows low correlation coefficient, that is, these multiple regression models can not represent the residual chlorine with the input parameters which varies independently with time changes related to weather condition. Artificial neural network models are applied with three different conditions. Input parameters are consisted of water quality data observed in water treatment process based on the structure of auto-regressive model type, considering a time lag. The artificial neural network models have better ability to predict residual chlorine at sediment basin than conventional linear and nonlinear multi-regression models. The determination coefficients of each model in verification process were shown as 0.742, 0.754, and 0.869, respectively. Consequently, comparing the results of each model, neural network can simulate the residual chlorine in sedimentation basin better than mathematical regression models in terms of prediction performance. This results are expected to contribute into automation control of water treatment processes.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.10b
• /
• pp.2-3
• /
• 2003

A method for rapid propagation of mature Jack fruit was developed. Four types of explants (mature embryos, apical meristems of young seedlings, apices from mature plants and nodal segments) were used. It has been found 88% of young apical meristems produced shoots in Campbell and Durzan (CD) medium compared to 60% in Murashige and Skoog (MS) medium. Only 1/3 of them produced multiple shoots. Shoot initiation from nodal segments was very rare. Mature apices produced callus. Although removal of the sheathing cover around mature buds enhanced the shoot initiation but success rate was low in growth regulator free medium. Embryos respond to the CD medium but not to the MS medium. Embryos from seeds soaked in water for 24 hours produced shoots after 8 weeks of incubation and the success rate was 70% while embryos from dry seeds only produced roots. There was no significant effect of cold storage (refrigeration) for 7 days on shoot initiation from mature embryos (65%) but the ability for shoot induction declines with storage time (55% after 21 days of cold storage). Mature axillary buds were established in Modified Campbell and Durzan (CD) medium supplemented with 0.5mg/1 and IBA. There was a significant difference in the growth performance of shoots according to the period of the year in which explants were collected. Highest (60%) was observed in November-January period. It was only 30% when the explants were collected in February-April or May-July and decreased to 20% in August-October. The shoots produced in November-January showed a higher vigor than those produced in other months. Since Jak fruit show seasonal changes in fruit bearing and shedding of leaves, it can be suggested that the difference in growth performances of tissues cultured in artificial culture media would have been affected by endogenous rhythms.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.670-678
• /
• 2016

We compared the germination rate of dehisced ginseng (Panax ginseng) seeds that were dried under two different conditions, slowly at $15^{\circ}C$ [relative humidity (RH) 10-12%] and rapidly under a laminar airflow cabinet at $25^{\circ}C$ (RH 22-25%). The measurements showed that drying rate and seed moisture content (SMC) play important roles in storage ability and vigor. The seeds that were dried rapidly at $25^{\circ}C$ showed high GR compared with the seeds that were dried at $15^{\circ}C$ after 6 and 12 months of storage at $-80^{\circ}C$ irrespective of MC. Seeds dried slowly at $15^{\circ}C$ with MC higher than 7.0% showed high GR maintenance after storage at $-18^{\circ}C$ and at $4^{\circ}C$ in comparison with rapidly dried seeds. However, the GR of the slowly desiccated seeds decreased as mean SMC was reduced to less than 5.0%, whereas the rapidly dried seeds were distinguished by significantly high GR irrespective of the storage conditions. The ginseng seeds desiccated under different conditions showed differences in storage performance. Seeds with 7-9% MC that were dried slowly at $15^{\circ}C$ for 5-7 days showed high GR after $4^{\circ}C$ and $-18^{\circ}C$ storage; however, longer periods of desiccation decreased the germination level remarkably compared with that of rapidly dried seeds.

• Composites Research
• /
• v.26 no.5
• /
• pp.328-333
• /
• 2013

In this study, bone plate made of glass/polypropylene composite material which was applied to an artificial bone was tested to check the service ability under fatigue loading. To check serviceability of composite bone plates fatigue test was carried out considering changes in the moisture absorption rate, locking position of screws and loading condition. Test results showed that all the tested specimens had the fatigue life more than one million cycles which was much higher fatigue life than the expected value of 650,000 cycles. Screw position was not critical impact on the deformation of the fracture site. In this paper, the mechanical performance of the glass/polypropylene composite was verified by fatigue test under various water absorption conditions, and this result may give useful information on the design of composite bone plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.