• 제목/요약/키워드: Performance test Protocol

검색결과 255건 처리시간 0.028초

다기능 프로토콜 시험시스템 설계 (Design of Multiple-Purpose Protocol Test System)

  • 최양희
    • 한국통신학회논문지
    • /
    • 제15권5호
    • /
    • pp.434-445
    • /
    • 1990
  • OSI 모델에 입각한 기능확인 위주의 종래의 단순한 프로토콜 시험기법은 성능시험, 적합성시험, 상호접속시험으로 세분화되고 대상 프로토콜도 일대일, 일대다수(Point-to -multipoint)로 확장되었다. 본 논문에서는 시험항목 생성부분과 시험결과 분석기능을 공통 플랫폼으로 하고 시험 대상 프로토콜의 성격과 시험목적에 따라서 모듈화된 시험수행기부분을 선택적으로 변경하는 다기능 프로토콜 시험시스템을 제시하였다. 본 논문은 다기능 시험시스템 설계에 입각한 예로서 망루팅 프로토콜 시험시스템, 트랜스포트 프로토롤 시험시스템의 구조를 보인다.

  • PDF

철도신호용 통신 프로토콜 성능해석 및 검증 (Performance Analysis and Validation of Railway Signalling Communication Protocol)

  • 황종규;이재호;신덕호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 춘계학술대회 논문집
    • /
    • pp.462-467
    • /
    • 2003
  • According to the computerization of railway signalling system, necessity of communication protocol for interface between these equipments is increasing. Therefore the research on communication protocol structure that is required according to computerization trend of these signalling goes. In our research the existed protocol currently used was analyzed, and the simulation modeling for performance analysis is deduced. Based on this simulation model the performance analysis and comparison is carried out, and also validation test is executed about new suggested protocol.

  • PDF

열차제어용 통신프로토콜 구조분석 및 성능검증 시험 (Performance Analysis and Testing of Railway Signalling Communication Protocol)

  • 황종규;이재호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.1318-1320
    • /
    • 2003
  • According to the computerization of railway signalling system, necessity of communication protocol for interface between these equipments is increasing. Therefore the research on communication protocol structure that is required according to computerization trend of these signalling goes. In our research the existed protocol currently used was analyzed, and the simulation modeling for performance analysis is deduced. Based on this simulation model the performance analysis and comparison is carried out, and also validation test is executed about new designed protocol.

  • PDF

모듈화된 얼굴인식 시스템을 이용한 성능 시험에 관한 연구 (A Study on the Performance Evaluation based on Modular Face Recognition System)

  • 홍태화;문현준;신용녀;이동근;김재성
    • 전자공학회논문지SC
    • /
    • 제42권4호
    • /
    • pp.35-44
    • /
    • 2005
  • 생체인식 기술 중 변별력과 활용성, 편리성이 뛰어난 얼굴인식 기술은 출입통제나 금융관련 업무 처리와 같이 보안관련 응용분야에서 필요성이 급속도로 요구되고 있다. 따라서 얼굴인식 알고리즘의 발전과 더불어 현 기술의 상태를 파악하고 발전 방향을 제시하기 위한 성능 시험 방법에 대한 연구 또한 중대한 이슈로 부각되고 있다. 본 연구에서는 얼굴인식 시스템의 성능 시험을 위한 프로토콜의 설계 기준을 제시하고 XM2VTS 데이터베이스를 사용하여 PCA를 기반으로 한 인식 시스템을 디자인하여 Identification 시나리오와 Verification 시나리오 상에서 성능 시험 결과를 제시한다.

고속도로 주행 시 선행차량의 전방 긴급 장애물 회피에 따른 Car-to-Car Cut-out 시나리오 기반 AES 성능평가 방법 연구 (A Study on AES Performance Assessment Protocol based on Car-to-car cut-out Scenario According to front Emergency Obstacle Avoidance of Preceding Vehicle during Highway Driving)

  • 김진석;이동훈
    • 자동차안전학회지
    • /
    • 제14권4호
    • /
    • pp.84-90
    • /
    • 2022
  • With the popularization of autonomous driving technology, safety has emerged as a more important criterion. However, there are no assessment protocol or methods for AES (Autonomous Emergency Steering). So, this study proposes AES assessment protocol and scenario corresponding to collision avoidance Car-to-Car scenario of Euro NCAP in order to prepare for obstacles that appear after the emergency steering of LV (Leading Vehicle) avoiding obstacles in front of. Autoware-based autonomous driving stack is developed to test and simulate scenario in CARLA. Using developed stack, it is confirmed that obstacle avoidance is successfully performed in CARLA, and the AES performance of VUT (Vehicle Under Test) is evaluated by applying the proposed assessment protocol and scenario.

Performance Test of Asynchronous Process of OGC WPS 2.0: A Case Study for Geo-based Image Processing

  • Yoon, Gooseon;Lee, Kiwon
    • 대한원격탐사학회지
    • /
    • 제33권4호
    • /
    • pp.391-400
    • /
    • 2017
  • Geo-based application services linked with the Open Geospatial Consortium (OGC) Web Processing Service (WPS) protocol have been regarded as an important standardized framework for of digital earth building in the web environments. The WPS protocol provides interface standards for analysis functionalities within geo-spatial processing in web-based service systems. Despite its significance, there is few performance tests of WPS applications. The main motivation in this study is to perform the comparative performance test on WPS standards. Test system, which was composed of WPS servers, WPS framework, data management module, geo-based data processing module and client-sided system, was implemented by fully open source stack. In this system, two kinds of geo-based image processing functions such as cloud detection and gradient magnitude computation were applied. The performance test of different server environments of non-WPS, synchronous WPS 1.0 and asynchronous WPS 2.0 was carried out using 100 threads and 400 threads corresponds client users on a web-based application service. As the result, at 100 threads, performance of three environments was within an adjacent range in the average response time to complete the processing of each thread. At 400 threads, the application case of WPS 2.0 showed the distinguished characteristics for higher performance in the response time than the small threads cases. It is thought that WPS 2.0 contributes to settlement of without performance problems such as time delay or thread accumulation.

A Vehicle SoC Fault Diagnosis Technique using FlexRay Protocol

  • Kang, Seung-Yeop;Jung, Ji-Hun;Park, Sung-Ju
    • 한국컴퓨터정보학회논문지
    • /
    • 제21권1호
    • /
    • pp.39-47
    • /
    • 2016
  • In this paper, we propose vehicle SoC fault diagnosis platform using FlexRay protocol in order to detect the faults of semiconductor control chip even after vehicle production. Before FlexRay protocol by sending NFI (Null Frame Indicator) bit among the header segment and a specific identifier in the payload segment of FlexRay frame, this technique can be distinguishable from normal mode and test mode. By using this technique, it is possible to detect the faults such as performance degradation of vehicle network system caused by the aging or several problems of vehicle semiconductor chip. Also high reliability and safety of vehicle can be maintained by using structural test for vehicle SoC fault detection.

Priority Based Multi-Channel MAC Protocol for Real-Time Monitoring of Weapon Flight Test Using WSNs

  • Min, Joonki;Kim, Joo-Kyoung;Kwon, Youngmi;Lee, Yong-Jae
    • 센서학회지
    • /
    • 제22권1호
    • /
    • pp.18-27
    • /
    • 2013
  • Real-time monitoring is one of the prime necessities in a weapon flight test that is required for the efficient and timely collection of large amounts of high-rate sampled data acquired by an event-trigger. The wireless sensor network is a good candidate to resolve this requirement, especially considering the inhospitable environment of a weapon flight test. In this paper, we propose a priority based multi-channel MAC protocol with CSMA/CA over a single radio for a real-time monitoring of a weapon flight test. Multi-channel transmissions of nodes can improve the network performance in wireless sensor networks. Our proposed MAC protocol has two operation modes: Normal mode and Priority Mode. In the normal mode, the node exploits the normal CSMA/CA mechanism. In the priority mode, the node has one of three grades - Class A, B, and C. The node uses a different CSMA/CA mechanism according to its grade that is determined by a signal level. High grade nodes can exploit more channels and lower backoff exponents than low ones, which allow high grade nodes to obtain more transmission opportunities. In addition, it can guarantee successful transmission of important data generated by high grade nodes. Simulation results show that the proposed MAC exhibits excellent performance in an event-triggered real-time application.

고속망에서의 멀티캐스트를 위한 고속 수송 프로토콜(XTP)의 구현 및 성능 평가 (Implementation and performance evaluationof the XTP(xpress transport protocol) for multicasting in high-speed netorks)

  • 이경호;이완직;이선우;김철우;김정삼;장성식;한기준
    • 한국통신학회논문지
    • /
    • 제21권9호
    • /
    • pp.2415-2421
    • /
    • 1996
  • 본 논문에서는 고속 통신망에서의 멀티캐스트를 위한 고속 수송 프로토콜 XTP(Xpress Transport Protocol) Rev 4.0 을 Windows NT 상에 구현하고 그 성능을 평가하였다. 프로토콜은 이벤트(Event) 구동 방식으로 설계되었으며, 성능향상을 위해 커널 내부에 네트워크 드라이버의 형태로 구현하였다. 구현된 프로토콜의 기능은 LAN 환경하에서 Windows NT 응용 프로그램들로 테스트되었으며, TCP와 성능비교를 수행하였다.

  • PDF

임베디드 자료동기화 게이트웨이를 위한 OMA DS 표준 SCTS 적합성 테스트 (SCTS Conformance Test for OMA DS Standard for an Embedded Data Synchronization Gateway)

  • 박주건;박기현
    • 대한임베디드공학회논문지
    • /
    • 제5권4호
    • /
    • pp.217-224
    • /
    • 2010
  • Nowadays, people perform their tasks anywhere anytime using their mobile devices. For this reason, data synchronization (DS) between mobile devices and a central server has become one of the most essential technologies in mobile environments. Currently, several mobile DS protocols are proposed and used. However, the existing DS protocols cannot guarantee interoperability between them. To solve the problem, an embedded DS gateway has been developed in our previous study. The gateway runs on a Windows Mobile-based emulator. It converts data on a mobile device into common data specified by OMA DS standard protocol and vice versa. The embedded gateway has been built to support the OMA DS standard protocol. In order to verify that the embedded gateway conforms to the OMA DS standard protocol, two kinds of OMA conformance tests have to be conducted - interoperability test with an OMA DS-based server and conformance test with SCTS (SyncML Conformance Test Suit). In this paper, some parts of the gateway previously built are modified and the modified gateway is installed on a Windows Mobile-based smart phone. And the interoperability test and the conformance test with the SCTS are conducted. The results of the tests show that the embedded DS gateway operates properly on the Windows Mobile-based smart phone and that the gateway passes the tests, verifying its conformity to the OMA DS standard protocol. In addition, DS performance tests show that DS delay times between a real smart phone and a DS server increase gently as the number of DS data increases. In other words, the embedded DS gateway built in this paper can be used for a real smart phone at a reasonable performance cost.