• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.344-352
• /
• 2017

This study investigated the formability and appearance performance of 20 women's worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. The mechanical properties of the 20 fabrics were measured using KES-FB and FAST systems; subsequently, fabric formability (F) and total appearance value (TAV) were calculated and compared with a virtual 3-D simulation silhouette by i-designer CAD system. The fabric formability of the domestic fabrics, calculated by KES-FB system, was lower than foreign fabrics, which was assumed to be caused by the stiff tactile property. The result was similar to that of the FAST system. Good wearing performance of the foreign worsted fabric was assumed to be caused by high extensibility and the compressibility of the fabrics. The TAV's of the domestic fabrics were also lower than foreign fabrics. Both the correlation between TAV and formability by the KESFB system and the correlation between TAV and formability by FAST system showed a good correlation coefficient. Fabric formability between KES-FB and FAST systems also showed a good correlation. The 3-D simulation silhouette of the foreign fabric by i-designer CAD system appeared superior to the domestic one, and assumed to be attributed to the low extensibility of the weft direction, stiff bending and high shear properties of the fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.104-116
• /
• 1990

An example of functional army's training wear was developed with careful considerations given to the actual user. Three steps of a functional clothing design process were followed in the design procedure. First, information on the adequacy of the current army's training wear was collected by interviews with 192 persons. Second, the current design and construction of the training wear was altered to meet the user's need from the result of the interview. Third, the performance of the newly designed army's training wear was evaluated for their effectiveness in several aspects such as conditions of the microclimate within clothing, metabolic rate, garment pressure during arm movements and appearance during body motions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.3
• /
• pp.385-399
• /
• 2020

Corporate social responsibility is a consistently discussed theme in many industries. Most corporations engage in CSR activities and now inform consumers in detail on what they have been doing for society. It has become a critical tool of consumer communication; however, little is known regarding the role of information transparency in the context of the fashion industry. This study discusses information transparency of fashion corporations which means revealing information regarding cost and garment making processes. The research proved that the higher consumers perceive a fashion brand's CSR performance (CSP), the more they think the provided CSR information is substantial; consequently, there is a favorable evaluation of the brand. The result provides insight regarding the relationship between CSP perception, perceived information substantiality, and brand evaluation. There was a significant partial mediation effect of perceived information substantiality. Moreover, the moderated mediation effect of information transparency appeared significant on the impact of CSP perception for brand evaluation via CSR information substantiality. The process model 7 was used as an analytical tool. The results of this study implies the importance of information transparency in the fashion industry context in the digital era.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.487-495
• /
• 1998

In this paper, a new type of implantable middle ear hearing aid, which consists of external loop coil, a small magnet and a simple external device, is proposed. The internal device of proposed type consists of only a small magnet and the external device does not need to be positioned behind the ear or in the ear canal. The proposed type is excellent in cosmetic sides and very convenient to use, because the external device can be hidden in upper garment and collar of clothes. Also, purposely this type doesn't need to be small on the size of battery, which means it has longer battery life. Therefore, the battery is not necessary to be charged frequently. It also can solve the difficulty of gap calibration at surgical operation which conventional Implantable middle. Therefore, the battery is not necessary to be charged frequently. It also can solve the difficulty of gap calibration at surgical operation which conventional implantable middle ear hearing aid has. We investigate the performance of proposed implantable middle ear bearing aid and we analyze that proposed type is appropriate for mild and severe hearing impaired person and the result of experiment showed the accuracy of our analysis. For the validation of our analysis we used the temporal bone at the experiment and confirm that ossicles can be vibrated when the proposed system In startled in the body.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.151-162
• /
• 2013

Studying employees' personality and relationship to their job would help to improve high unemployment and turnover rate in the current Korean fashion and textile industry. Based on personality which is an important influential factor, this research studied types of fashion and textile-related occupations and differences among employees' personalities related to the types. Using disclosed data from Korea Employment Information Service, 27 fashion and textile-related occupations were selected for the final analysis. Ward's Minimum Variance Cluster Analysis, MANOVA, and ANOVA by SAS 9.3 was used to analyze data. First, fashion and textile-related occupations were classified into three groups. Group 1 was mostly consisted of occupations related to manufacturing process of fashion and textile including mechanical technicians. Group 2 included occupations in garment designing and manufacturing. Designers and manufacturers including shoes, bags, and jewelry belong to group 3. Second, after observing differences in personalities among the three groups, group 1 answered that most of the personalities were not important for performance of their duties, group 2 said that only some of them were important, and group 3 regarded most of them as important. Specifically, group 1 considered precision as the most important personality but rest of the personalities not as necessary. It was revealed that personalities in relationship with other personnel such as sociality and leadership were not important. The results in this study will be used for analyzing whether job seekers' desired occupations in fashion field corresponds to their personalities and is expected to become a basic data of students' career counseling for educators.

• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.481-490
• /
• 2006

Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.623-627
• /
• 2014

In recent years, wireless communication technologies in human body have received an increasing attention and the research on an antenna that can be worn also has been actively conducted. In this paper, an wearable antenna that can receive GPS signal frequency is proposed. The antenna was manufactured by using a copper polyester fabric with thickness of 0.08mm as a radiator and a ground plate, and a goatskin with thickness of 0.7mm as dielectric substrate. Cutting edges placed in diagonal direction of square patch in order to obtain a circular polarization characteristic, and the conductive cloth and leather was laminated by using a conductive epoxy. First, goatskin dielectric constant was obtained through the simulation and measurement of resonance frequency of the three square patch antennas with different size. On the basis of the results, an antenna operating in the GPS band was designed and the performance of the antenna was validated by making the experiment. The change of the characteristic of the antenna that is located on the shoulder parts of the clothing and wearing person were measured. And it was confirmed that the reception sensitivity has a similar level as compared to the commercially produced ceramic GPS antenna.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.22-31
• /
• 2014

This study investigated the physical properties of warm up yarns and their knitted fabrics including the dye affinity and color fastness to washing of these knitted fabrics according to the various dyeing times and temperatures on dyeing process. The results were summarized as follows. The tenacity of Nylon/PP warm-up yarn was 4g/d and breaking strain was 4.5%. The wet and dry thermal shrinkages were higher than those of PET warm-up yarn. The maximum heat flow rate(Qmax) of Nylon/PP warm-up knitted fabric was lower than that of PET warm-up knitted fabric and heat keeping rate(a) of Nylon/PP warm-up knitted fabric was higher as 47% than that of PET warm-up knitted fabric. It was shown that the shape retention and wearing comfort of Nylon/PP warm-up knitted fabric were better than those of PET warm-up knitted fabric. The dye-affinity(K/S) of Nylon/PP warm-up knitted fabric showed maximum value at the dyeing condition of 40minute or 50minute dyeing time with $80^{\circ}C$ dyeing temperature, but PET warm-up knitted fabric showed maximum value at the 30minute or 40minute with $110^{\circ}C$ dyeing temperature. Finally, the color fastness to washing of Nylon/PP warm-up knitted fabric showed good value as between 4 and 5 grade.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.2
• /
• pp.99-117
• /
• 2020

Objective : The purpose of this study was to study the effects of occupation-based community rehabilitation on occupational performance skills and activities of daily living in stroke disabled persons living in the community, and to investigate the changes in occupation quality and satisfaction. Methods : In this single-subject ABA design study with follow-up evaluation, one severely disabled person diagnosed with stroke who lived in the community was recruited. The procedure consisted of a total of 25 sessions for 17 weeks. Intervention was according to occupation-based community rehabilitation, and the researcher visited the subject's home. Individualized intervention was applied according to the OTIPM. The intervention was composed of task assignment and feedback, home environment modification, information-related caregiver education, and community resource network. The evaluation of each session included the changes in the frequency of occupational performance skills, the quality of occupational performance in daily life, and the changes in occupational satisfaction, activities of daily living, quality of life, and maintenance of in the occupational performance skills during follow-up. The results were visually analyzed using a bar graph and a linear graph. Results : The results showed that the occupation-based community rehabilitation improved activities of daily living such as putting on socks, shoes slip-on, and upper body dressing garment within reach. Within the framework of the AMPS, it was confirmed that the quality of occupational performance was improved in all the subjects, and the degree of satisfaction also improved. Conclusion : This study showed that occupation-based rehabilitation can improve the occupational performance skills of stroke home disabled people positively affect the quality of occupational performance in daily life. Therefore, I think it is meaningful that useful for them.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.165-182
• /
• 1994

Korea's clothing industry which has been country's leading export industry and basic strategical industry is now faced with many difficulties both domestically and internationally. Domestically it is faced with continuing shortage of manpower in both production line and management high labour cost causing increase in price putting more weight on behavior of consumers resulting in change of industrial environment and continuing structural problems of industry itself. Internationally it is faced with strengthening of import regulations and protectionism of developed countries and rapid emergence of underdeveloped countries as leading exporting nations. In reality export plays the most essential role in our economy and is especially sensitive to the external environmental factors. Already economic bloc phonomenon can be seen everywhere and is continuing to accelerate in place such as E. U in Europ, North & South America as NAFTA, and South East Asian contries which recent tendency of economic unity effort is present. These countries of such economic blocs are imposing heavy custom duties reinforcing provision of country origin and acting out strict inspection regulations in order to protect the interest of their own industry. Therefore it is vital to manufacture excellent quality goods For these reasons study in this area has brought attention in Korea as well as worldwide in the recent years. Apparel industry which requires professional technology and ability is the most competitive international business. In order to challenge the international market the high level of intelligence is most required to produce high quality goods. The purpose of this study is to analyze the relationship between functions and roles of marketing and to approach problems in more efficient manner. Apparel industry is composed of various programs such as design pattern making merchandising and textile science. To succeed in the business is to give the highest satisfaction to the targeted market. Hence this study will example the factors that determine the Cost Quality and Performance of apparel products. The study will involve following steps; firstly establish relationship between the quality concept and productivity of apparel products Secondly inquire in to marketing strategy laying stress on apparel production related factors focusing on merchandising marketing production and operations Thirdly prospect 21st century apparel industry focusing on garment production and trade and also other countries structural improvement Fourthly establish the new dimension of competitive factors by grasping the actual circumstance of Korea's apparel industry in the international market. The research method will include; First reality approach method by analysing the present state of industry Second literal analysis such as marketing comparisons between leading apparel exporting countries.