• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.95-98
• /
• 2006

This study investigates spalling properties of high performance concrete, 60MPa clan, made with the various types of coarse aggregate and adding ratio of polypropylene(PP) fiber. As experimental parameters, totally sixteen specimens of ${\phi}100{\times}200mm$ in size are prepared: one specimen for control without fiber, ten specimens with different coarse aggregate types, along with 0.05, 0.1, 0.15 percent of PP fiber in each. 1 hour fire test is conducted and then spalling appearance, spalling degree and residual compressive strength are examined. In addition, sit specimens made with two types of coarse aggregate site, along with same adding ratio of fiber are supplementally done, and only spalling properties is examined. Test results showed that control concrete and most specimens containing 0.05% of PP fiber exhibited 4 to 3 level of spalling degree, resulting severe explosive spalling, except for the specimen using basalt aggregate(Bc) showing 2 to 3 level of that. Especially, the Bc specimen containing 0.1% of the fiber exhibited that residual compressive strength value was 32%, which is 10% higher than other specimens using limestone or granite. Spalling resistance performance was also effective as aggregate size increase.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.147-155
• /
• 2009

This study has been made to examine the basic information, the preferences of material quality, and the demand performance of clothing for underwear materials between atopic patients and non-patients. The measurement tool was a questionnaire. For statistical analysis of data, crosstabs, ${\chi}^2$-test, t-test and ANOVA through SPSS for Windows(version 14.0) were used. The results obtained are as follows. The degree of the basic knowledge about clothing materials indicated that women was higher than men. The material decision method and the most considering part in case of selecting underwear products showed difference between men and women. The preference factors for underwear material quality were drawn with the five factors of sense of weight/pliability, lustering/see-through, tactility, and sense of cold and warmth. The preferred underwear material showed difference according to gender, existence and nonexistence of atopic determatitis, and degree of strength of skin itching caused by clothing materials. The demand performances of clothing in case of selecting underwear were drawn with the four factors of hygiene/practicality, skin protection, quality of materials, and aesthetic attribute. The demand performance of underwear showed difference according to gender, existence and nonexistence of atopic determatitis, degree of strength of skin itching caused by clothing materials.

• 한국간호교육학회지
• /
• 제23권1호
• /
• pp.66-75
• /
• 2017

Purpose: The aim of this study was to evaluate differences of pre-post simulation training in problem solving ability, performance confidence, and critical thinking skill according to degree of nursing students' self-leadership. Methods: This study was a descriptive survey using a self-report questionnaire. One hundred eighty nursing students participated in this study which programed a simulation scenario of pre-post operative patients' care. Descriptive statistics, paired t-test, ANCOVA with IBM SPSS 21.0 program were used for data analysis. Results: After the simulation training, both the above-average subjects and below-average subjects in self-leadership significantly improved their problem-solving ability, performance confidence, and critical thinking skill. compared with their previous level. The subjects who rated above-average in self-leadership, improved their degree of problem-solving ability, performance confidence, and critical thinking skill significantly more than those who were below-average in self-leadership. Conclusion: Self-leadership of nursing students is an important element in effective simulation training.

• Structural Engineering and Mechanics
• /
• 제85권3호
• /
• pp.407-417
• /
• 2023

Precast assembled bridge piers with hybrid connection (PASP) use both tendons and socket connections. To study the seismic performance of PASP, a full-scale in-situ test was performed based on an actual bridge project. The elastic-plastic fiber model of PASP was established using finite element software, and numerical analyses were performed to study the influence of prestress degree and socket depth on the PASP seismic performance. The results show that the typical failure mode of PASP under horizontal load is bending failure dominated by concrete cracking at the joint between the column and cushion cap. The cracking of the pier concrete and opening of joints depend on the prestress degree and socket depth. The prestressing tendons and socket connection can provide enough ductility, strength, restoration capability, and bending strength under small horizontal displacements. Although the bearing capacity and post yield stiffness of the pier can be improved to some extent by increasing the prestressing force, ductility is reduced, and residual deformation is increased. Overall, there are reasonable minimum socket depths to ensure the reliability of the socket connection.

• 한국콘텐츠학회논문지
• /
• 제14권7호
• /
• pp.291-301
• /
• 2014

본 연구는 신입간호사의 정서지능, 자아탄력성, 핵심자기평가가 간호업무수행에 미치는 영향을 파악하는 서술적 조사연구이다. 대상자는 경기도에 소재한 800병상 이상의 종합병원 2곳에서 근무하는 12개월 미만의 신입간호사 114명이었다. 자료 수집은 2013년 7월부터 11월까지 간호업무수행, 정서지능, 자아탄력성, 핵심자기평가에 대해 구조화된 설문지를 이용하여 측정하였다. 연구의 결과, 신입간호사의 교육 정도, 직무만족도, 근무부서 업무만족도에 따라 간호업무수행 정도의 차이가 있었으며, 정서지능, 자아탄력성, 핵심자기평가가 높을수록 간호업무수행 정도는 높았다. 정서지능, 교육수준, 핵심자기평가와 직무만족도는 간호업무수행 정도를 잘 예측하는 변수로 확인되었고, 간호업무수행 정도를 33% 설명하는 것으로 나타났다. 따라서 신입간호사의 교육 정도와 직무만족도를 고려하여 신입간호사 오리엔테이션부터 간호업무수행 외에 정서지능과 핵심자기평가를 포함한 실제적인 실무적응 훈련교육이 필요하다.

• 유통과학연구
• /
• 제14권9호
• /
• pp.31-45
• /
• 2016

Purpose - This study develops a simulation model that looks at the dynamics between social capital and business performance in strategic networks to understand their behaviors in relation to each other, and to suggest dynamic relationship strategies. Research design, data, and methodology - Based on existing literature, this study identifies the complex causal loop diagram on social capital and business performance in strategic networks, and converts them into a simulation model for observing how the changes in business environment and relationship dependency affect social capital and business performance. Results - The simulation results showed that, first, the formation in social capital and business performance of networks with low relationship dependency was less affected by the changes in business environment. Second, the formation in social capital and business performance of networks with high relationship dependency was negatively impacted by the changes in business environment. In other words, higher relationship dependency strengthened the impact of changes in business environment on business performance. Conclusions - Thus, this study confirmed that in strategic networks, the changes in business environment and the degree of relationship dependency dynamically affect business performance, and that relationship dependency mediates the degree in which changes in the business environment affect business performance. The results of the simulations were further verified through actual business cases.

• Asian Journal of Innovation and Policy
• /
• 제7권3호
• /
• pp.461-488
• /
• 2018

This paper explores the relationship between network cooperation, innovation, internationalization and economic performance of manufacturing small and medium enterprises (SMEs) of engineering goods industry located in Bangalore city, India. At the outset, it is observed that SMEs receive the maximum assistance in the realm of product specifications. Moreover, they do not resort to manufacturing new products as much as they resort to product modifications or process improvements. Further, it is found (using Chi-square test of independence) that higher the network assistance received from an external network, greater is the innovation performance of SMEs. Subsequently, using analysis of variance (ANOVA), export intensity (proxy for internationalization performance) of SMEs is found to have a significant positive association with both the degree of their network cooperation and of their innovation performance. Lastly, it is observed that higher the degree of each of network cooperation, innovation performance and internationalization performance, better is the economic performance (measured by total sales turnover) of SMEs. These results have significant implications for the policy makers of the country to give due attention to network cooperation, innovation and internationalization as the means of enhancing the economic performance of SMEs.

• 대한토목학회논문집
• /
• 제32권5A호
• /
• pp.317-325
• /
• 2012

본 연구에서는 초고성능 섬유보강 콘크리트(Ultra High Performance Fiber Reinforced Concrete, UHPFRC)의 구속 상태에서의 수축 거동을 평가하고자 국내 외에서 가장 보편적으로 사용되는 링-테스트(ring-test)를 이용하여 구속 수축 실험을 수행하였다. 특히, 다양한 구속도에서의 수축 거동을 평가하기 위하여 내부 강재 링의 두께와 내부 반경을 달리하여 실험을 수행하였으며, 자유 수축과 인장강도 실험을 수반하여 구속도 및 응력 이완, 수축 균열 가능성 등을 복합적으로 평가하였다. 실험 결과 내부 링의 두께가 증가할수록 내부 링의 평균 변형률과 잔류 인장응력은 감소하였으며, 반면에 구속도는 증가하는 경향을 보였다. 내부 링의 반경에 따라서는 변형률 및 잔류 인장응력, 구속도의 차이가 거의 없는 것으로 나타났다. 모든 시험체에서 잔류 인장응력이 인장강도에 비해 작은 것으로 나타났으며, 수축 균열은 발생하지 않았다. 지속적으로 작용하는 계면 구속 하중에 의해 탄성 수축 응력의 약 39~65%가 이완되는 것으로 나타났으며, 최대 이완 응력은 내부 링의 두께가 두꺼울수록 증가하는 것으로 나타났다. 마지막으로 본 연구에서는 비선형 회귀분석을 수행하여 재령에 따라 변하는 구속도를 예측하였으며, 실험 결과와 잘 일치하는 것으로 나타났다.

• 생물정신의학
• /
• 제22권3호
• /
• pp.140-148
• /
• 2015

Objectives The aim of this study is to investigate the correlation between degenerative changes in brain [i.e., global cortical atrophy (GCA), medial temporal atrophy (MTA), white matter hyperintensities (WMH)] and neurocognitive dysfunction in Korean patients with Alzheimer's disease. Methods A total of 62 elderly subjects diagnosed with Alzheimer's disease were included in this study. The degenerative changes in brain MRI were rated with standardized visual rating scales (GCA or global cortical atrophy, MTA or medial temporal atrophy, and Fazekas scales) and the subjects were divided into two groups according to the degree of degeneration for each scale. Cognitive function was evaluated with Korean version of the Consortium to Establish a Registry for Alzheimer's Disease (CERAD-K) and several clinical features, including apolipoprotein E ${\varepsilon}4$ status, lipid profile and thyroid hormones, were also examined. Chi-square test and Fisher's exact test were performed to analyze the relationship between the degree of cerebral degeneration and neurocognitive functions. Results Demographic and clinical features, except for the age, did not show any significant difference between the two groups divided according to the degree of cerebral degenerative changes. However, higher degree of GCA was shown to be associated with poorer performance in verbal fluency test, word list recall test, and word list recognition test. Higher degree of MTA was shown to be associated with poorer performance in Mini-Mental State Examination in the Korean Version of CERAD Assessment Packet (MMSE-KC), word list recognition test and construction praxis recall test. Higher degree of white matter hyperintensities was shown to be associated with poorer performance in MMSE-KC. Conclusions Our results suggest that severe brain degeneration shown in MRI is associated with significantly poorer performance in neurocognitive tests in patients with Alzheimer's disease. Moreover, the degree of GCA, MTA and white matter hyperintensities, represented by scores from different visual rating scales, seems to affect certain neurocognitive domains each, which would provide useful information in clinical settings.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권5호
• /
• pp.580-585
• /
• 2012

R744용 해양온도차 발전 시스템의 작동변수에 대한 기초 설계자료를 제공하고자 증발열량, 응축열량, 전체일량, 효율에 대한 사이클 성능을 분석하였다. 본 연구에서 고려된 작동변수는 R744 해양온도차 발전 사이클의 과열도, 과냉각도, 응축온도, 증발온도 등이다. 주요 결과를 요약하면 다음과 같다. R744의 증발열량은 과열도와 과냉각도가 증가할수록 증가하는 반면, 응축온도가 증가할수록 감소한다. 전체일량은 R744의 과열도와 과냉각도와 함께 증가하나 증발온도는 증가할수록 감소한다. 그리고 효율은 과열도와 과냉각도가 증가할수록 증가하는 반면, 응축온도는 감소한다. 그러므로 R744용 해양온도차 발전 시스템의 증발열량, 응축열량, 전체일량, 효율은 과열도, 과냉각도, 응축온도, 증발온도, 펌프와 터빈 효율에 영향을 받는 것을 알 수 있었다. 따라서 R744용 해양온도차 발전 시스템의 설계시에는 이러한 영향을 면밀하게 파악하여야 한다.