• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1153-1153
• /
• 2001

Directive 79/373/EEC on the marketing of compound feeding stuffs, provided far a flexible declaration arrangement confined to the indication of the feed materials without stating their quantity and the possibility was retained to declare categories of feed materials instead of declaring the feed materials themselves. However, the BSE (Bovine Spongiform Encephalopathy) and the dioxin crisis have demonstrated the inadequacy of the current provisions and the need of detailed qualitative and quantitative information. On 10 January 2000 the Commission submitted to the Council a proposal for a Directive related to the marketing of compound feeding stuffs and the Council adopted a Common Position (EC N$^{\circ}$/2001) published at the Official Journal of the European Communities of 2. 2. 2001. According to the EC (EC N$^{\circ}$ 6/2001) the feeds material contained in compound feeding stufs intended for animals other than pets must be declared according to their percentage by weight, by descending order of weight and within the following brackets (I :< 30%; II :> 15 to 30%; III :> 5 to 15%; IV : 2% to 5%; V: < 2%). For practical reasons, it shall be allowed that the declarations of feed materials included in the compound feeding stuffs are provided on an ad hoc label or accompanying document. However, documents alone will not be sufficient to restore public confidence on the animal feed industry. The objective of the present work is to obtain calibration equations fur the instanteneous and simultaneous prediction of the chemical composition and the percentage of ingredients of unground compound feeding stuffs. A total of 287 samples of unground compound feeds marketed in Spain were scanned in a FOSS-NIR Systems 6500 monochromator using a rectangular cup with a quartz window (16 $\times$ 3.5 cm). Calibration equations were obtained for the prediction of moisture ($R^2$= 0.84, SECV = 0.54), crude protein ($R^2$= 0.96, SECV = 0.75), fat ($R^2$= 0.86, SECV = 0.54), crude fiber ($R^2$= 0.97, SECV = 0.63) and ashes ($R^2$= 0.86, SECV = 0.83). The sane set of spectroscopic data was used to predict the ingredient composition of the compound feeds. The preliminary results show that NIRS has an excellent ability ($r^2$$\geq$ 0, 9; RPD $\geq$ 3) for the prediction of the percentage of inclusion of alfalfa, sunflower meal, gluten meal, sugar beet pulp, palm meal, poultry meal, total meat meal (meat and bone meal and poultry meal) and whey. Other equations with a good predictive performance ($R^2$$\geq$0, 7; 2$\leq$RPD$\leq$3) were the obtained for the prediction of soya bean meal, corn, molasses, animal fat and lupin meal. The equations obtained for the prediction of other constituents (barley, bran, rice, manioc, meat and bone meal, fish meal, calcium carbonate, ammonium clorure and salt have an accuracy enough to fulfill the requirements layed down by the Common Position (EC Nº 6/2001). NIRS technology should be considered as an essential tool in food Safety Programs.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.243-250
• /
• 2004

Monitoring is used to see if a real-time system provides a service on time. Generally, monitoring for real-time focuses on investigating the current status of a real-time system. To support a stable performance of a real-time system, it should have not only a function to see the current status of real-time process but also a function to predict executions of real-time processes, however. The legacy prediction model has some limitation to apply it to a real-time monitoring. First, it performs a static prediction after a real-time process finished. Second, it needs a statistical pre-analysis before a prediction. Third, transition probability and data about clustering is not based on the current data. We propose the execution prediction model based on learning algorithm to solve these problems and apply it to real-time monitoring. This model gets rid of unnecessary pre-processing and supports a precise prediction based on current data. In addition, this supports multi-level prediction by a trend analysis of past execution data. Most of all, We designed the model to support dynamic prediction which is performed within a real-time process' execution. The results from some experiments show that the judgment accuracy is greater than 80% if the size of a training set is set to over 10, and, in the case of the multi-level prediction, that the prediction difference of the multi-level prediction is minimized if the number of execution is bigger than the size of a training set. The execution prediction model proposed in this model has some limitation that the model used the most simplest learning algorithm and that it didn't consider the multi-regional space model managing CPU, memory and I/O data. The execution prediction model based on a learning algorithm proposed in this paper is used in some areas related to real-time monitoring and control.

• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.455-464
• /
• 2014

After launching the Geostationary Ocean Color Imager (GOCI) on June 2010, field campaigns were performed routinely around Korean peninsula to collect in-situ data for calibration and validation. Key measurements in the campaigns are radiometric ones with field radiometers such as Analytical Spectral Devices FieldSpec3 or TriOS RAMSES. The field radiometers must be regularly calibrated. We, in the paper, introduce the optical laboratory built in KOSC and the relative calibration method for in-situ measurement spectroradiometer. The laboratory is equipped with a 20-inch integrating sphere (USS-2000S, LabSphere) in 98% uniformity, a reference spectrometer (MCPD9800, Photal) covering wavelengths from 360 nm to 1100 nm with 1.6 nm spectral resolution, and an optical table ($3600{\times}1500{\times}800mm^3$) having a flatness of ${\pm}0.1mm$. Under constant temperature and humidity maintainance in the room, the reference spectrometer and the in-situ measurement instrument are checked with the same light source in the same distance. From the test of FieldSpec3, we figured out a slight difference among in-situ instruments in blue band range, and also confirmed the sensor spectral performance was changed about 4.41% during 1 year. These results show that the regular calibrations are needed to maintain the field measurement accuracy and thus GOCI data reliability.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.763-774
• /
• 2020

Wind data forecasted from the numerical weather prediction (NWP) model is generally used as the first-guess of the target tracking process to obtain the atmospheric motion vectors(AMVs) because it increases tracking accuracy and reduce computational time. However, there is a contradiction that the NWP model used as the first-guess is used again as the reference in the AMVs verification process. To overcome this problem, model-independent first guesses are required. In this study, we propose the AMVs derivation from Lucas and Kanade optical flow method and then using it as the first guess. To retrieve AMVs, Himawari-8/AHI geostationary satellite level-1B data were used at 00, 06, 12, and 18 UTC from August 19 to September 5, 2015. To evaluate the impact of applying the optical flow method on the AMV derivation, cross-validation has been conducted in three ways as follows. (1) Without the first-guess, (2) NWP (KMA/UM) forecasted wind as the first-guess, and (3) Optical flow method based wind as the first-guess. As the results of verification using ECMWF ERA-Interim reanalysis data, the highest precision (RMSVD: 5.296-5.804 ms^-1) was obtained using optical flow based winds as the first-guess. In addition, the computation speed for AMVs derivation was the slowest without the first-guess test, but the other two had similar performance. Thus, applying the optical flow method in the target tracking process of AMVs algorithm, this study showed that the optical flow method is very effective as a first guess for model-independent AMVs derivation.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.343-349
• /
• 2013

Data including 1,372,050 milk records pertaining to 438,019 cows from 1983 to 2011 collected during performance tests conducted by the National Livestock Cooperative Dairy Improvement Center were used to calculate milk income and profit of individuals and investigate the effects of production levels of early lactation (parity 1 and 2, respectively). Individuals with a moderate level of early lactation stayed longer in herds. Among parity 1, the 9,000 kg or higher group had a lower mean number of lactations than the overall mean of 3.13. The 7,000 kg or lower and 10,000 kg or higher groups had lower mean life time milking days than the overall mean of 1,076.8 days. Standard deviations of lifetime traits tended to decrease as production levels increased. For parity 2, the 11,000 kg or higher group had a lower mean number of lactation than the overall mean of 3.43. The lifetime milking days was highest in the 12,000 kg group (1,212.0 days), and generally smaller in the lower groups. Profit increased as the production level of groups increased for both parity 1 and 2. In groups with low production levels, profit of parity 1 was higher than that of parity 2, while the reverse was true in groups with high production levels. These results suggest that individuals in the low production groups had a greater likelihood to be culled due to reproductive or other problems. Furthermore, the accuracy of the prediction of lifetime profit of individuals with a milk yield of 305 days seems to be higher for parity 2 than parity 1; therefore, it is desirable to predict lifetime profit using the 305d milk yield of parity 2. In conclusion, breeding goals are based on many factors in functions for the estimation of profit; however, production levels during early lactation (parity 1 and 2) can be used as indicators of profit to extend profitability.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.77-85
• /
• 2013

Purpose: The accurate movement of gantry rotation, collimator and correct application of dose rate are very important to approach the successful performance of Volumetric Modulated Arc Therapy (VMAT), because it is tightly interlocked with a complex treatment plan. The interruption and restart of dose delivery, however, are able to occur on treatment by various factors of a treatment machine and treatment plan. If unexpected problems of a treat machine or a patient interrupt the VMAT, the movement of treatment machine for delivering the remaining dose will be restarted at the start point. In this investigation, We would like to know the effect of interruptions and restart regarding dose delivery at VMAT. Materials and Methods: Treatment plans of 10 patients who had been treated at our center were used to measure and compare the dose distribution of each VMAT after converting to a form of digital image and communications in Medicine (DICOM) with treatment planning system (Eclipse V 10.0, Varian, USA). We selected the 6 MV photon energy of Trilogy (Varian, USA) and used OmniPro I'mRT system (V 1.7b, IBA dosimetry, Germany) to analyze the data that were acquired through this measurement with two types of interruptions four times for each case. The door interlock and the beam-off were used to stop and then to restart the dose delivery of VMAT. The gamma index in OmniPro I'mRT system and T-test in Microsoft Excel 2007 were used to evaluate the result of this investigation. Results: The deviations of average gamma index in cases with door interlock, beam-off and without interruption on VMAT are 0.141, 0.128 and 0.1. The standard deviations of acquired gamma values are 0.099, 0.091, 0.071 and The maximum gamma value in each case is 0.413, 0.379, 0.286, respectively. This analysis has a 95-percent confidence level and the P-value of T-test is under 0.05. Gamma pass rate (3%, 3 mm) is acceptable in all of measurements. Conclusion: As a result, We could make sure that the interruption of this investgation are not enough to seriously affect dose delivery of VMAT by analyzing the measured data. But this investigation did not reflect all cases about interruptions and errors regarding the movement of a gantry rotation, collimator and patient So, We should continuously maintain a treatment machine and program to deliver the accurate dose when we perform the VMAT for the many kinds of cancer patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.113-129
• /
• 2015

Location branding is a very important income making activity, by giving special meanings to a specific location while producing identity and communal value which are based around the understanding of a place's location branding concept methodology. Many other areas, such as marketing, architecture, and city construction, exert an influence creating an impressive brand image. A place brand which shows great recognition to both native people of S. Korea and foreigners creates significant economic effects. There has been research on creating a strategically and detailed place brand image, and the representative research has been carried out by Anholt who surveyed two million people from 50 different countries. However, the investigation, including survey research, required a great deal of effort from the workforce and required significant expense. As a result, there is a need to make more affordable, objective and effective research methods. The purpose of this paper is to find a way to measure the intensity of the image of the brand objective and at a low cost through text mining purposes. The proposed method extracts the keyword and the factors constructing the location brand image from the related web documents. In this way, we can measure the brand image intensity of the specific location. The performance of the proposed methodology was verified through comparison with Anholt's 50 city image consistency index ranking around the world. Four methods are applied to the test. First, RNADOM method artificially ranks the cities included in the experiment. HUMAN method firstly makes a questionnaire and selects 9 volunteers who are well acquainted with brand management and at the same time cities to evaluate. Then they are requested to rank the cities and compared with the Anholt's evaluation results. TM method applies the proposed method to evaluate the cities with all evaluation criteria. TM-LEARN, which is the extended method of TM, selects significant evaluation items from the items in every criterion. Then the method evaluates the cities with all selected evaluation criteria. RMSE is used to as a metric to compare the evaluation results. Experimental results suggested by this paper's methodology are as follows: Firstly, compared to the evaluation method that targets ordinary people, this method appeared to be more accurate. Secondly, compared to the traditional survey method, the time and the cost are much less because in this research we used automated means. Thirdly, this proposed methodology is very timely because it can be evaluated from time to time. Fourthly, compared to Anholt's method which evaluated only for an already specified city, this proposed methodology is applicable to any location. Finally, this proposed methodology has a relatively high objectivity because our research was conducted based on open source data. As a result, our city image evaluation text mining approach has found validity in terms of accuracy, cost-effectiveness, timeliness, scalability, and reliability. The proposed method provides managers with clear guidelines regarding brand management in public and private sectors. As public sectors such as local officers, the proposed method could be used to formulate strategies and enhance the image of their places in an efficient manner. Rather than conducting heavy questionnaires, the local officers could monitor the current place image very shortly a priori, than may make decisions to go over the formal place image test only if the evaluation results from the proposed method are not ordinary no matter what the results indicate opportunity or threat to the place. Moreover, with co-using the morphological analysis, extracting meaningful facets of place brand from text, sentiment analysis and more with the proposed method, marketing strategy planners or civil engineering professionals may obtain deeper and more abundant insights for better place rand images. In the future, a prototype system will be implemented to show the feasibility of the idea proposed in this paper.

• The Journal of the Korean life insurance medical association
• /
• v.4 no.1
• /
• pp.110-132
• /
• 1987

A study on hepatomegaly detected by abdominal palpation, and facial telangiectasia in a total of 3,418 insured persons medically examined at the Honam Medical Room of Dong Bang Life Insurance Company Ltd. from February, 1984 to August, 1985 was undertaken. The results were as follows: 1) Hepatomegaly was found in 383 cases(27.5%) among the 1,395 insureds of male and in 163 cases(8.1%) among the 2,023 insureds of female. The difference of incidence of hepatomegaly between all males and females showed statistical significance(p<0.001). In each age group, the incidence of hepatomegaly in :nale was higher than that in female. The incidence of hepatomegaly in each age group in male increased cnosiderably with age; it showed 11.6%,16.2%, 42.6% and 52.9% from second to sixth decade in order, thereafter in seventh decade it decreased to 26.7%, While the incidence of hepatomegaly in female increased slightly in each age group. 2) Facial telangiectasia was found in 318 cases(22.8%) among all males and in 157 cases(7.8%) among all females. The difference of incidence of telangiectasia between all males and females showed statistical significance(p<0.001). In each age group, the incidence of telangiectasia in male was higher than that in female, except of second decade. The incidence of facial telangiectasia in each age group in male increased considerably with age; while it increased slightly in female. 3) Facial telangiectasia accompanied by hepatomegaly was found in 235 cases(61.4%) among 383 cases of hepatomegaly in male and in 69 cases(42.3%) among 163 cases of hepatomegaly in female. The difference of incidence of telangiectasia between males and females show ed statistical significance(p<0.001). 4) Facial telangiectasia without spider angiomata accompanied by hepatomegaly was found in 201 cases(52.5%) among 383 cases of hepatomegaly in all males and in 67 casgs(41.4%) among 163 cases of hepatomegaly in all females; facial spider angiomata accompanied by hepatomegaly was found in 34 cases(8.9%) among 383 cases of hepatomegaly in all males and in 2 cases(1.2%) among 163 cases of hepatomegaly in all females. 5) Abnormal SGOT activity was found in 19 cases(7.9%) among 242 cases of hepatomegaly in all males and in one case(1.5%) among 67 cases of hepatomegaly in all females. The difference of incidence of abnormal SGOT activity showed statistical significance(p<0.001). The incidence of abnormal SGOT activity by the size of hepatomegaly, that is, palpated <1 finger's breadth, <2 fingers' breadth and ${\geqq}2$ fingers' breadth, revealed 2.2%, 6.0% and 60.0% respectively in all males, while abnormal SGOT activity was found only one case in fifth decade among 67 cases of hepatomegaly in all females. 6) In ordinary medical examination(the insured amount is low) abnormal SGOT activity was found in 7 cases(4.8%) among 146 cases of hepatomegaly palpated $1\frac{1}{2}$ fingers' breadth and under, while it was not found in 37 cases of the same sized hepatomegaly in all females. Above mentioned 7 cases are thought to be very significant because 7 cases occupy 35% in 20 cases of abnormal SGOT activity with hepatomegaly. 7) Abnormal SGOT activity was found in 12 cases(4.4%) among 273 cases of hepatomegaly of "not firm" consistency, while it was found in 8 cases(22.2%) among 36 cases of hepatomegaly of "firm" consistency. The difference of incidence of abnormal SGOT activity showed statistical significance(p<0.05). 8) Abnormal SGOT activity was found in 5 cases(17.9%) among 28 cases of spider angiomata with hepatomegaly, while it was found in 10 cases(7.3%) among 166 cases of telangiectasia without spider angiomata with hepatomegaly. Owing to a small number of cases, statistical significance was not recognized, but the incidence of abnormal SGOT activity in spider angiomata cases with hepatomegaly is apt to be higher than that in telangiectasia cases without spider angiomata with hepatomegaly. 9) The incidence of abnormal SGOT activity is apt to be higher with age in male group; abnormal SGOT activity was not found among 4 cases of hepatomegaly in second decade and it was 3.8% in third decade, 4.5% in fourth decade, 9.3% in fifth decade, 17.5% in sixth decade and 33.3% in seventh decade, while the incidence of it was only one case among 67 cases in all females. 10) It is believed that the performance of liver function test to the subjects with hepatomegaly even in ordinary medical examination(the insured amount is low) will give considerable contribution for medical selection of hepatomegaly risk. 11) Age of the insured(young or old), presence of facial telangiectasia or spider angiomata especially and their severity, and consistency of enlarged liver(firm or not) should be considered to increase accuracy in evaluating hepatomegaly risk.