• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.112-120
• /
• 2012

A numerical model considering the internal vaporization and the creep effect, in the form of a analytical program, for tracing the behavior of high strength concrete(HSC) members exposed to fire is presented. The two stages, i.e., spalling procedure and fire resistance time, associated with the thermal, moisture flow, creep and structural analysis, for the prediction of fire resistance behavior are explained. The use of the analytical program for tracing the response of HSC member from the initial pre-loading stage to collapse, due to fire, is demonstrated. Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member, so that the prediction method of the moisture distribution inside the concrete members at fire is developed. The validity of the numerical model used in this program is established by comparing the predictions from this program with results from others fire resistance tests. The analytical program can be used to predict the fire resistance of HSC members for any value of the significant parameters, such as load, sectional dimensions, member length, and concrete strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.92-103
• /
• 2015

Development of new concrete bridge deck system with FRP plank using as a permanent formwork and the main tensile reinforcement recently has been actively conducted. Concurrent use as a reinforcing material and a permanent formwork, it is possible to reduce the construction time and construction costs than the usual concrete slab. In this study, an experiment was carried out for the bond stress between cast-in-place concrete and the type of FRP plank using as a permanent formwork. The interfacial fracture energy that can be one of the most important parameters were evaluated for adhesion performance and bond stress to know the characteristics of the failure mechanism of the adhesion surface. Interfacial fracture energy of normal concrete is 0.24kN/m of GF11 case, in the case of GF21, 0.43kN/m appears, in the case of CF11 and GF31, 0.44kN/m and 0.46kN/m respectively it appeared. In case of RFCON, 0.52kN/m appears from GF12, the CF12 and GF22, 0.51kN/m and 0.36kN/m appeared each case.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.6
• /
• pp.49-59
• /
• 2016

We develop liquefaction resistance curves, which represent the correlation between cyclic resistance ratio (CRR) and number of cycles (N) to estimate the build-up of residual excess pore pressure from simple shear tests performed for this study and also from published literature. The liquefaction curve is calculated from two models. The comparisons show that one of the models is not reliable because it underestimates CRR. The scatter of the data is shown to be significantly reduced when CRR is normalized to the resistance ratio at N = 15 ($CRR_{N=15}$). Use of the normalization is particularly useful because CRR can be easily estimated from field tests. From normalization, we propose mean, upper, and lower curves. The corresponding design equation and its parameters are also proposed. We believe that the proposed curves can be used for effective stress site response analyses and evaluation of the seismic performance of port structures.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.649-655
• /
• 2006

Waves progressing into the coastal area can be amplified, swashed and overtopped by a wave overtopping control structure, and it converts the kinetic energy of the waves to the potential energy with a hydraulic head above the mean sea level by conserving the overflow in a reservoir. Then the potential energy in the form of hydraulic head can be converted to electric power utilizing extremely low-head hydraulic turbine. This study aims to find the most optimal shape of wave overtopping structure which maximizes overtopping volume rate of sea water. Laboratory experiments for the performance evaluation of wave overtopping control structures were carried out in three dimensional wave tank, and the three dimensional structure models with planar wave concentration shapes(B/b) were manufactured into five classes, which were optimized by cross sectional parameters of the structure, ie, length of ramp(l), gradient of inclined ramp($cot{\phi}$) and freeboard height of the wave overtopping structure($h_e$) proposed by Shin and Hong(2005). The wave overtopping discharges were investigated with 20 incident wave conditions and wave directions of $0^{\circ},\;15^{\circ},\;30^{\circ}$.

• Journal of Animal Science and Technology
• /
• v.52 no.3
• /
• pp.221-228
• /
• 2010

The objective of the present study was to investigate the effects of Fe-soy proteinate chelate (Fe-SP) on sows milk, piglet blood parameters and performance. A total of 15 sows of 3 wk before parturition and pigs after births to 3 wk were assigned to three dietary treatments: control (sow-basal diet, piglets with Fe injection); Fe-SP 100 (Fe 100 ppm as Fe-SP in sow and piglet diet); Fe-SP 200 (Fe 200 ppm as Fe-SP in sow and piglet diet). Each treatment had 5 replicates (sows) of six piglets per sow randomly selected from the same offspring. For this experiment, Fe-SP was manufactured. There were no significant differences among treatments in number of pigs born in total or alive per litter, birth weight, number of pigs weaned per litter and weaning weight. However, weight gain, feed intake and feed conversion ratio significantly (p<0.05) decreased as the supplementation level of Fe-SP increased. There were no significant differences among treatments in Fe content at 3 wk before parturition in sow blood. However, Fe content at 2 wk before parturition in sow blood significantly (p<0.05) increased as the supplementation of Fe-SP. While there were no significant differences among treatments in Fe content at 1 wk before parturition in sow blood, it tended to increase as the supplementation level of Fe-SP increased. There were no significant differences among treatments in Fe content of sow milk. However, it tended to increase as the supplementation level of Fe-SP increased. Iron content in the blood of piglets was significantly (p<0.05) higher in control (Fe injected) than Fe-SP 100 and Fe-SP 200 treatments at $1^{st}$ and $2^{nd}$ wk but it was significantly higher in Fe-SP 200 than others in $3^{rd}$ wk. Zinc content in the blood also significantly (p<0.05) increased as the Fe-SP supplementation level increased in $3^{rd}$ wk. In conclusion, Fe-SP supplementation significantly affected Fe content in the blood of piglets. Iron injection was more effective at $1^{st}$ and $2^{nd}$ wk, while Fe-SP 200 supplementation was effective at $3^{rd}$ wk in improving blood Fe level in piglets.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.529-534
• /
• 2008

This study was conducted to determine the effects of ion water and premixed mineral supplementation on the growth performance, carcass, and meat quality parameters in finishing pigs (LY$\times$D). Each 20 pigs were randomly allotted to three treatments; CON (basal diet), T1 (CON diet added active water), T3 (T1 diet added 1.0% premixed mineral). Used ion water and premixed mineral consisted mainly of Zn and Si, respectively. Cholesterol content (mg% meat) were not differ significantly in the samples, however, the ratios of cholesterol to fat in T1 and T2 was significantly lower than the control (p<0.05). The fatty acid qualities of palmitic acid, linoleic acid, arachidonic acid, SFA (saturated fatty acid), EFA (essential fatty acid), and EFA/UFA ratio were the highest significantly, however, those of the oleic acid, UFA (unsaturated fatty acid), and UFA/SFA ratio were the lowest significantly in T2 (p<0.05). The amino acid levels of glutamic acid, alanine, leucine, lysine, total amino acids, and EAA (essential amino acid) were the highest in T1 (p<0.05). Whereas, the levels of serine, valine, isoleucine were the highest in T2 (p<0.05). The results indicate that dietary ionized water and premixed mineral affects fatty acid composition and improves amino acid composition.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.295-312
• /
• 2017

Digital video content is the most information-intensive and high-value content. Therefore, it is necessary to protect the intellectual property rights of these contents, and this paper also proposes a watermarking method of digital image for this purpose. The proposed method uses the frequency characteristics of 2-Dimensional Discrete Wavelet Transform (2D-DWT) for digital images and digital watermark on global data without using local or specific data of the image for watermark embedding. The method to insert digital watermark data uses a simple Quantization Index Modulation (QIM) and a multiple watermarking method that inserts the same watermark data in multiple. When extracting a watermark, multiple watermarks are extracted and the final watermark data is determined by a simple statistical method. This method is an empirical method for experimentally determining the parameters in the watermark embedding process. The proposed method performs experiments on various images against various attacks and shows the superiority of the proposed method by comparing the performance with the representative existing methods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.1063-1068
• /
• 2014

We investigated the effects of feeding rate on the growth performance and blood components of sub-adult olive flounder Paralichthys olivaceus. Optimum feeding rate (initial fish mean weight : $370{\pm}5.72g$) was determined under the low water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.3%, 0.4%, 0.5%, and 0.6% body weight (BW) per day, and to satiation (0.75%). Feeding trial was conducted under a flow-through system with 12 1.2-metric ton aquaria receiving filtered seawater at $12-14^{\circ}C$ for 4 weeks. Weight gain (WG) and specific growth rate (SGR) for fish fed at 0.6% BW per day was significantly higher than that of unfed fish (0%) and fish fed at 0.3% and 0.4% BW per day. There were no significant differences in WG and SGR among fish fed at 0.5%, 0.6%, and 0.75%. These parameters were negative and significantly lower in the starved fish than in fish fed the experimental diet at all feeding rates. Survival for unfed fish (0%) was significantly lower than that of fish fed at 0.4%, 0.5%, and 0.6%. Hematocrit and hemoglobin content of fish fed at 0% and 0.75% (satiation) were significantly lower than that of fish fed at 0.4% BW per day. Total protein content in unfed fish was significantly lower than those in other treatments. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 370 g was 0.51% BW per day at the low water temperature.

• Journal of Radiation Protection and Research
• /
• v.30 no.2
• /
• pp.69-75
• /
• 2005

Gas avalanche microdetectors, such as micro-strip gas chamber (MSGC), micro-gap chamber (MGC), micro-dot chamber (MDOT), etc., are operated under high voltage to induce large electron avalanche signal around micro-size anodes. Therefore, the anodes are highly exposed to electrical damage, for example, sparking because of the interaction between high electric field strength and charge multiplication around the anodes. Gas electron multiplier (GEM) is a charge preamplifying device in which charge multiplication can be confined, so that it makes that the charge multiplication region can be separate from the readout micro-anodes in 9as avalanche microdetectors possible. Primary electron collection efficiency is an important measure for the GEM performance. We have defined that the primary electron collection efficiency is the fractional number of electron trajectories reaching to the collection plane from the drift plane through the GEM holes. The electron trajectories were estimated based on 3-dimensional (3D) finite element method (FEM). In this paper, we present the primary electron collection efficiency with respect to various GEM operation parameters. This simulation work will be very useful for the better design of the GEM.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.156-163
• /
• 2015

This paper presents a new framework for design and economic evaluation of wind energy-based electricity supply system. We propose a network optimization (mixed-integer linear programming) model to design the underlying energy supply system. In this model we include practical constraints such as land limitations of onshore wind farms and different costs of offshore wind farms to minimize the total annual cost. Based upon the model, we also analyze the sensitivity of the total annual cost on the change of key parameters such as available land for offshore wind farms, required area of a wind turbine and the unit price of wind turbines. We illustrate the applicability of the suggested model by applying to the problem of design of a wind turbines-based electricity supply problem in Jeju. As a result of this study, we identified the major cost-drivers and the regional cost distribution of the proposed system. We also comparatively analyzed the economic performance of on/off shore wind farms in wind energy-based electricity supply system of Jeju.