• 한국콘텐츠학회논문지
• /
• 제18권7호
• /
• pp.449-458
• /
• 2018

소셜 네트워크 서비스의 사용량이 증가함에 따라 오프라인에서 발생한 이벤트 정보가 더욱 빠르게 확산되고 있다. 이에 따라 소셜 데이터를 분석하여 이벤트를 검출하기 위한 연구들이 진행되고 있다. 본 논문에서는 소셜 네트워크 환경에서 사용자 관심도를 고려한 그래프 기반 이벤트 검출 기법을 제안한다. 제안하는 기법은 사용자들이 게시한 글을 분석하여 키워드 그래프를 구축한다. 사용자의 소셜 행위로부터 관심도를 계산하고 관심도의 변화를 고려하여 이벤트 판별에 이용한다. 따라서 의미 없이 반복 게시되어 이벤트로 검출된 결과를 제거하고 결과의 신뢰성을 향상시킬 수 있다. 제안하는 이벤트 검출 기법의 우수성을 입증하기 위해 다양한 성능평가를 수행한다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.261-266
• /
• 2001

Three innovative technologies to remediate trichloroethylene (TCE) in situ were (or currently are being) evaluated at a TCE-contaminated groundwater site at Edwards Air Force Base (AFB), California. The three technologies all make use of groundwater recirculation to obviate the need to pump contaminated groundwater to the surface fer treatment. The first technology, which implements aerobic cometabolic bioremediation to destroy TCE in situ, successfully reduced dissolved TCE concentrations from above 1 mg/L to 20-30 $\mu\textrm{g}$/L. The second technology, in-well vapor stripping (IWVS), is capable of treating dissolved TCE at concentrations in the tens to hundreds of mg/L. Finally, the third technology, bioenhanced in-well vapor stripping (BEHIVS): is a combination of the first two technologies, and is designed to reduce very high levels of TCE (tens to hundreds of mg/L) to concentrations that meet regulatory requirements 5 $\mu\textrm{g}$/L). Results of field evaluations of tile first two technologies are presented, and the design of the BEHIVS system. as well as model predictions of BEHIVS performance and the current status of the technology field evaluation. is discussed.

• 한국음향학회지
• /
• 제8권4호
• /
• pp.74-82
• /
• 1989

본 논문에서는 음성신호의 다중채널 실시간 부호화를 위하여 1차 차분신호의 불필요한 영비트를 제거하고 5개 단위로 음성 패킷을 구성해 주는 패킷 부호화에 관하여 그 실현방법 및 성능을 연구하였다. 제안된 패킷부호화 방법은 알고리즘이 매우 간단하며 수치연산보다는 주로 데이터의 조작에 의해 이루어지므로 많은 정보량의 압축은 기대하기 어려우나, 10가지의 음성 안내문에 적용한 결과 약 $40\%$정도의 정보 압축이 가능하였다. 따라서 제안된 방법을 사용하면 매우 간단하게 음성신호 저장시 메모리를 절약해줄 수 있으며 또한 전송시 전송 효율을 높여줄 수 있고, 특히 알고리즘이 간단하므로 부호화시 채널을 다중좌하기에 유리한 장점이 있다.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.123-129
• /
• 2015

In general, recent critical studies of five-axis machine have tended to center on the question of effective machining to realize complex shape parts. However, the hydrostatic bearing and journal bearing, both of which are involved in the complex process of dividing the processing of internal precision-shape machining, must be optimized. Although the angle head is designed to machine the internal shape as it approaches the inner diameter of the work piece, research on the angle head in five-axis machining has received only minimal attention in domestic industries. In this study, an angle head which is optimized for effective internal shape machining is developed. In pursuit of this purpose, 3D and 2D designs of the angle head for five-axis machining are devised. Reliability is secured through static performance tests and machining accuracy evaluations of the angle head in keeping with the machining accuracy standard of 0.2mm for hydrostatic bearings.

• 아동학회지
• /
• 제22권4호
• /
• pp.299-313
• /
• 2001

This study examines the current state of English education in private kindergartens in Korea. Among 1700 kindergarten teachers surveyed for this research, 680 replied that their institutions provided English lessons for children. Analyses of the data collected from these 680 teachers showed : 1) They started to teach English not because of educational considerations but because of pressure from children's parents or kindergarten principals; 2) Most of the English teachers were part-time instructors specially recruited for English lessons. Generally, English lessons were given two or three times a week, with one session lasting for about 20 minutes. A variety of teaching methods and materials were used for the lessons given to children aged three to five. Focus of the lessons was given to listening and speaking words and sentences; 3) Most of the teachers considered the scarcity of qualified English instructors as the most serious problem for providing English education in kindergartens, and they did not want to teach English themselves. They evaluated positively the performance and role of Korean part-time English instructors. The evaluations were generally poor as to native speakers serving as kindergarten English teachers.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1119-1139
• /
• 2014

A damage-based seismic design procedure for steel frame structures is formulated as an optimization problem, in which minimization of the initial construction cost is treated as the objective of the problem. The performance constraint of the design procedure is to achieve "repairable" damage state for earthquake demands that are less severe than the design ground motions. The Park-Ang damage index is selected as the seismic damage measure for the quantification of structural damage. The charged system search (CSS) algorithm is employed as the optimization algorithm to search the optimum solutions. To improve the time efficiency of the solution algorithm, two simplifying strategies are adopted: first, SDOF idealization of multi-story building structures capable of estimating the actual seismic response in a very short time; second, fitness approximation decreasing the number of fitness function evaluations. The results from a numerical application of the proposed framework for designing a twelve-story 3D steel frame structure demonstrate its efficiency in solving the present optimization problem.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.427-433
• /
• 2015

Hot forging industry workers are prone to encounter several health risks due to lack of automation and poor working environment conditions. These workers particularly suffer from muscle fatigue owing to the constant handling of heavy products during the forging process. Thus we developed an assistant robot for workers who carry out hot forging tasks. The purpose of a robot is to compensate gravity-loads for heavy products. To verify the functionality of a robot, we performed a muscle fatigue analysis using Electromyography (EMG) signals. Four muscles of the upper extremity were chosen to measure muscle activity. And experiment conditions were setup to imitate the hot forging process. Post experimental analysis of the captured muscle activity revealed a reduction in the median frequency of the EMG signals, which means clear fatigue reduction due to a robot's assistance. The developed assist robot with compact and economical components can be efficiently utilized at forging work sites to create better working conditions for operators.

• 공학교육연구
• /
• 제20권3호
• /
• pp.58-76
• /
• 2017

This study was carried out with the aim of suggesting the directions and criteria for the evaluation of engineering college by the media. In order to accomplish the purpose of the research, we compare and analyze items and criteria of the evaluation of the engineering colleges by domestic and foreign major media companies and investigate and analyze opinions of the engineering community on the evaluation on engineering colleges and universities by media, and then suggest direction of improvements of the evaluation including evaluation items. As the methods of study, literature survey, field investigations, and interviews of experts were utilized. The results of this study are as follows. At first, the direction of evaluations should be focused on educational values of institutions, and then evaluation should consider the characteristics of each universities and engineering colleges. Expansion of participation of engineering communities in evaluation process is also necessary and to secure of reliable and public data is highly important. In addition, the weighting factor of educational performance area were proposed to raise and also the factors should be adjusted to reflect the characteristics of engineering colleges.

• 한국ITS학회 논문지
• /
• 제2권2호
• /
• pp.13-22
• /
• 2003

기존의 신신호 시스템에서 문제점으로 지적되고 있는 과포화 상태에서의 신호제어전략을 개선할 수 있는 방안으로서, 기존의 포화도를 기준으로 한 방식이 아닌 대기행렬의 길이를 균형화 하는 방식을 개발하였다. 이 방식은 대기행렬의 길이를 각 방향별로 동일하게 유지하면서 전체적인 대기행렬의 길이를 감소시킬 수 있는 것으로 나타났다. 또한 이 방식을 신호주기 산출 및 현시분할에도 적용하는 방법을 개발하였다. 이 방식은 기존의 방식과 비교하여 거시적으로는 대기행렬의 길이를 감소시킴과 동시에 미시적으로는 차량의 평균지체를 감소시키는 효과를 나타내었다.