• 대한간호학회지
• /
• 제29권3호
• /
• pp.665-678
• /
• 1999

Stroke is a major cause of death and long-term disability. Because muscle weakness is one of the most prominent consequences of stroke, it was considered important to determine whether exercise in order to improve muscle strength and range of motion could have an effect in limiting the learned disuse of the affected side. The purpose of the study was to identify the effects of an 8 week rehabilitation program on physical and cognitive ability in stroke patients. A total of 18 patients who were admitted to the oriental medicine unit of a K medical center in Seoul were recruited : ten for the experimental group and eight for the control group. The rehabilitation program consisted of three level's of active and passive exercises for prevention of muscle contracture and at range of motion. Muscle strength, flexibility of the upper and lower extremity, perceived balance, functional independence, depression, and quality of life for the two groups were compared at the pretest and 4 and 8 weeks after the rehabilitation program. The results are as follows : 1) When measuring muscle strengths of shoulder abduction and elbow flexion, hip flexion and knee extensor, ankle dorsi-flexor and muscle strength of knee flexor. Muscle strength of knee flexor for the experimental group was significantly higher than the comparison group at the 4 weeks. 2) Muscle strength and flexibility of the ankle dorsi -flexor for the experimental group was significantly better than for the control group at 8 weeks. 3) Functional independence, perceived balance, and Tinetti balance for the experimental group as measured at 4 and 8 weeks were better than for the control group. Also, there were changes over time in physical balance and functional ability, but there was no significant differences between the groups. 4) The experimental group showed a higher quality of life and lower depression than the control group at 8 weeks. 5) Muscle strength and flexibility of ankle dorsi -flexor were significantly changed over time and an interaction between group and time. The findings suggested that the rehabilitation program would improve the physical and psychological status of the stroke patients. Thus, the gains in actual or perceived ability to perform physical activities was marked.

• 국제물리치료학회지
• /
• 제7권1호
• /
• pp.919-924
• /
• 2016

In this study, 20 men and women in their 20s were divided into a footboard passive stretching group and a manual passive stretching group. After stretching was applied to the soleus for 5 weeks, a comparative analysis was performed on the range of motion(ROM) of the ankle joint to determine changes in the flexibility of the soleus. Both the footboard stretching group and manual stretching group first performed stretching for 15 sec, followed by a 10-sec break. One set consisted of performing the above process twice consecutively, and each group had to perform five sets in total. A goniometer was used as a measuring instrument. The results of the experiment were analyzed using a nonparametric analysis, Wilcoxon signed rank test, and Mann-Whitney test. SPSS WIN 18.0 was employed for the statistical analysis. In terms of the comparison of the flexibility before and after the experiment according to the different interventions, the application of footboard stretching to the soleus for 5 weeks resulted in $3.2^{\circ}$ right dorsiflexion (p=.009), $6.98^{\circ}$ right plantar flexion(p=.008), $4.14^{\circ}$ left dorsiflexion(p=.005), and $10.97^{\circ}$ left plantar flexion(p=.007), which were all statistically significant increases. The application of manual stretching led to $6.04^{\circ}$ right dorsiflexion(p=.005), $12.14^{\circ}$ right plantar flexion(p=.005), $7.00^{\circ}$ left dorsiflexion (p=.008), and $16.38^{\circ}$ left plantar flexion(p=.005). Therefore, both footboard stretching and manual stretching were effective in enhancing the flexibility of the soleus. However, statistically significant larger increases in the ROM of the ankle joint were observed in the manual stretching group.

• Physical Therapy Rehabilitation Science
• /
• 제8권2호
• /
• pp.74-78
• /
• 2019

Objective: Myofascial release (MFR) is used to restore tissue extensibility of the fascia tissue and is considered to be useful in a number of clinical settings, such as low back pain (LBP). Dynamic myofascial release (DMFR) is the manual therapy, which combined the conventional MFR with the joint mobilization. The purpose of this study was to investigate the effects of the DMFR on trunk mobility, and furthermore, whether the increase of trunk mobility can carry over the improvement of dynamic standing balance in persons with chronic nonspecific LBP. Design: Randomized controlled trial. Methods: Thirty persons with chronic non-specific LBP participated in the study and were randomly assigned to the DMFR group (n=15) or the control group (n=15). DMFR was performed for two sessions (15 minutes/session) per week for four weeks for the treatment group. Both the DMFR and control groups were allowed to perform low-intensity physical activities during the treatment period. The Modified-modified $Sch{\ddot{o}}ber$ test (MMST) for trunk mobility and the Functional Reach Test (FRT) for dynamic standing balance were measured before and after the treatment period in both the DMFR group and the control group. Results: The MMST value of DMFR group increased significantly in all trunk range of motion (flexion, extension, lateral flexion, and rotation) after treatment, compared with the control group (p<0.05). Additionally, the FRT value of the DMFR group improved significantly after treatment, compared with the control group (p<0.05). Conclusions: We suggest that DMFR have a positive effect on trunk mobility and standing balance in persons with chronic LBP.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.231-236
• /
• 2019

Background/Objectives: This paper proposes a dual mode feedback-controlled cycling system for children with spastic cerebral palsy to rehabilitate upper extremities. Repetitive upper limb exercise in this therapy aims to both reduce and analyze the abnormal torque patterns of arm movements in three- dimensional space. Methods/Statistical analysis: We designed an exercycle robot which consists of a BLDC motor, a torque sensor, a bevel gear and bearings. Mechanical structures are customized for children of age between 7~13 years old and induces reaching and pulling task in a symmetric circulation. The shafts and external frames were designed and printed using 3D printer. While the child performs active/passive exercise, angular position, angular velocity, and relative torque of the pedal shaft are measured and displayed in real time. Findings: Experiment was designed to observe the features of a cerebral palsy child's exercise. Two children with bilateral spastic cerebral palsy participated in the experiment and conducted an active exercise at normal speed for 3 sets, 15 seconds for each. As the pedal reached 90 degrees and 270 degrees, the subject showed minimum torque, in which the child showed difficulty in the pulling task of the cycle. The passive exercise assisted the child to maintain a relatively constant torque while visually observing the movement patterns. Using two types of exercise enabled the child to overcome the abnormal torque measured in the active data by performing the passive exercise. Thus, this system has advantage not only in allowing the child to perform the difficult task, which may contribute in improving the muscle strength and endurance and reducing the spasticity but also provide customizable system according to the child's motion characteristic. Improvements/Applications: Further study is needed to observe how passive exercise influences the movement characteristics of an active motion and how customized experiment settings can optimize the effect of pediatric rehabilitation for spastic cerebral palsy.

• 한국전문물리치료학회지
• /
• 제31권1호
• /
• pp.79-88
• /
• 2024

Background: The abdominal drawing-in maneuver (ADIM), a method of lumbar stabilization training, is an effective neuromuscular intervention for lumbar instability associated with low back pain (LBP). Objects: The purpose of this study was to compare the effect of a 2-week period of the ADIM and tensor fasciae latae-iliotibial band (TFL-ITB) self-stretching on lumbopelvic rotation angle, lumbopelvic rotation movement onset, TFL-ITB length, and pain intensity during active prone hip lateral rotation. Methods: Twenty-two subjects with lumbar extension rotation syndrome accompanying shortened TFL-ITB (16 males and 6 females) were recruited for this study. The subjects were instructed how to perform ADIM training or ADIM training plus TFL-ITB self-stretching program at home for a 2-week period. A 3-dimensional ultrasonic motion analysis system was used to measure the lumbopelvic rotation angle and lumbopelvic rotation movement onset. An independent t-test was used to determine between-group differences for each outcome measure (lumbopelvic rotation angle, lumbopelvic rotation movement onset, TFL-ITB length, and pain intensity). Results: The results showed that ADIM training plus TFL-ITB self-stretching decreased the lumbopelvic rotation angle, delayed the lumbopelvic rotation movement onset, and elongated the TFL-ITB significantly more than did ADIM training alone. Pain intensity was lower in the ADIM training plus TFL-ITB self-stretching group than the ADIM training alone group; however, the difference was not significant. Conclusion: ADIM training plus TFL-ITB self-stretching performed for a 2-week period at home may be an effective treatment for modifying lumbopelvic motion and reducing LBP.

• 한국운동역학회지
• /
• 제31권2호
• /
• pp.133-139
• /
• 2021

Objective: This study aims to verify the conventional deadlift motions using by two different grips, thereby elucidating the grounds for effective training methods that can minimize the risk of injury. Method: Total of 18 healthy young adults were recruited for this study (age: 25.11±2.19 yrs., height: 175.67±5.22 cm, body mass: 78.5±8.09 kg, 1-RM: 125.75±19.48 kg). All participants were asked to perform conventional deadlift with two types of grips which are overhand grip (OG) and underhand grip (UG). In each grip, participant perform the deadlift with 50% and 80% of the pre-measured 1-RM. A 3-dimensional motion analysis with 8 infrared cameras and 3 channels of EMG was performed in this study. A two-way ANOVA (group × load) with repeated measure was used for statistical verification. The significant level was set at α=.05. Results: There were significant differences in grip type and weight on the right shoulder joint, and only significant difference in grip on the left shoulder joint (p<.05). The hip joint ROM was significantly increased as the weight increased in both types of grips on phase 1, while the ROM of hip joint was significantly decreased as the weight increased only in the case of OG on phase 2 (p<.05). In case of the OG, as the weight, increased significantly increased L1 ROM and L3 ROM were revealed on phase 1 and phase 2, respectively (p<.05). Moreover, as the weight increased, UG revealed significantly decreased L5 ROM on phase 1, while both grips showed significantly increased ROM on phase 2 (p<.05). In addition, the erector spinae and the biceps femoris, which are synergist for the motion, showed a significant difference in both types of grip according to the weight (p<.05). The muscle activity ratio of gluteus maximus/biceps femoris showed a significant difference only in the UG according to the weight (p<.05). Conclusion: In conclusion, beginners might be suggested to use the UG for maintaining the neutral state of the lumbar spine and focus on the gluteus maximus muscle, which is the main activation muscle. For the experts, it may recommend alternative use of the OG and UG according to the training purpose to minimize the compensation effect.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.57-65
• /
• 2003

This paper proposes an optimum design method of structural and control systems, using a 2-D truss structure as an example. The structure is subjected to initial static loads and disturbances. For the structure, a FEM model is formed. Using modal transformation, the equation of motion is transformed into modal coordinates, in order to decrease D.O.F. of the FEM model. To suppress the effect of the disturbances, the structure is controlled by an output feedback $H_{\infty}$ controller. The design variables of the combined optimal design of the control-structure systems are the cross sectional areas of truss members. The structural objective function is the structural weight. The control objective function is the $H_{\infty}$ norm, the performance index of control. The second structural objective function is the energy of the response related to the initial state, which is derived from the time integration of the quadratic form of the state in the closed-loop system. In a numerical example, simulations have been perform. Through the consideration of structural weight and $H_{\infty}$ norm, an advantage of the combined optimum design of structural and control systems is shown. Moreover, since the performance index of control is almost nearly optimiz, we can acquire better design of structural strength.

• 대한가정학회지
• /
• 제40권8호
• /
• pp.37-48
• /
• 2002

The purpose of this study was to survey Navajo's textiles of the transitional period(1868-1890) and to examine appearance background of those textiles. The two study questions were central to the project. 1) What were characteristics of eye-dazzler and pictorial in the transitional period? 2) How developed was the American trader's role? To perform the purpose, literatures on this subject were surveyed, investigation of textiles in Arizona State Museum and Historical Museum of Arizona were accomplished. The results of this study were as follows: 1. Eye-dazzler is called because of their small, serrate triangle and diamond patterns in intense, contrasting colors. Eye-dazzler mostly used Germantown yam and wedge-weave technique. Germantown was a plied yam colored with synthetic dyes. Wedge-weave technique used optical illusions and an undulating technique to create an effect of motion and rhythmic symmetry. 2. The Americans began to intern Navajos at Bosque Redondo, New Mexico in 1863. During their stay at Bosque Redondo, the Navajo came into greater contact with Rio Grande blankets. The influence of designs of these becomes increasingly important in the eye-dazzler. 3. Pictorial materials included rich new sources the railroad provided and living environment of animals, plants, hogans, neighbors, deities that interested the Navajo. Also, sandpainting textiles were a pictorial. Three types of textiles utilized: yei, yeibichai, and sandpainting tapestry. 4. The arrival of the railroad caused many changes for the lives and textiles of the Navajos. The railroad brought a new client into the Navajo, and the Navajos attempted new textiles with design-inspiring fresh materials to adjust taste of the eastern purchasers.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2016

In the dentistry field, an ultrasonic surgery unit is widely used in bone cutting and scaling to reduce operation time and minimize hemorrhage. The purpose of this study was to evaluate bone cutting and the effect of a specimen's temperature on the two-type ultrasonic surgery unit using a handpiece moving system(HMS). A HMS, which can cut the bone, was developed to perform the experimental procedure with precision of motion control. Bone specimens were prepared from a combination of epoxy-hardener and cortical bone of bovine leg. Through the bone-cutting experiment, the cutting depth was evaluated by not only scanning electron microscopy, but also Vernier calipers. Also, the temperature distribution was measured by a thermo-graphic camera. This study may be applied methodically in various experimental evaluations on a performance test by a HMS.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.475-481
• /
• 2013

직접구동형 서보밸브의 제어시스템은 비선형적이며 밸브스풀에 미치는 유체력의 영향은 매우 크고 부하압력의 크기에 좌우된다. 제어시스템의 설계요구조건을 만족시키기 위해, 제약직접탐색방법인 유전자 알고리즘과 콤플렉스법을 적절히 활용하여 진상-지상제어기 및 미분피드백제어기의 최적 상수값을 탐색하였다. 최적 제어기 상수값을 대입하여 제어시스템을 시뮬레이션한 결과 설계요구조건을 만족하였다.