• 한국식품과학회지
• /
• 제22권4호
• /
• pp.492-495
• /
• 1990

소금용액(15%, w/v)에서 깍두기용 무우 cube를 간절임하는 동안 무우 cube중의 ${\alpha}-amylase$ 활성도와 ascorbic acid 함량의 변화, 포도당액과 고추즙액의 침투에 대한 영향 및 생균수에 미치는 영향을 조사하였다. Ascorbic acid 함량은 1시간 동안 약 24%(w/v)가 감소되었고, 반면 ${\alpha}-amylase$ 활성도는 시간이 경과됨에 따라 다소 증가하는 경향을 보였다. 또한 간절임은 무우 cube 조직내로의 glucose와 고추 중액과 같은 양념류의 침투를 촉진하는 효과가 있었다. 그리고 무우 cube 중의 세균과 효모 및 곰팡이 수는 간절임 중 감소되었는데 간절임 1시간 이내에 주로 감소하는 경향을 나타냈다.

• 대한토목학회논문집
• /
• 제26권6C호
• /
• pp.377-384
• /
• 2006

다짐된 모래-벤토나이트 혼합토의 인장강도 측정을 위한 새로운 시험방법을 개발하기 위하여 일축관입(UP)시험에 대한 이론적 실험적 측면에서의 연구를 실시하였다. 다짐된 혼합토의 인장강도는 완전소성이론을 이용한 한계해석으로부터 계산될 수 있으며 개량일축관입시험기(Improved Unconfined Penetration, IUP)는 기존의 일축관입시험기와 비교하여 시험기기의 개선을 통해 측정 오류를 감소시켰다. 선행 시험 결과 원반의 크기와 재하속도의 증가와 pH가 높아(산성)짐에 따라 인장강도가 증가함을 알 수 있었다. 또한 원반 직경이 25.4mm이며 재하속도가 0.5%/min~1%/min일 경우가 개량일축관입시험에 가장 적합하다는 것을 알 수 있었다. 할렬인장시험 결과와의 비교를 통해 개량일축관입시험법의 신뢰성도 확인하였다.

• 한국초지조사료학회지
• /
• 제38권4호
• /
• pp.320-324
• /
• 2018

본 연구는 티모시 건초와 농후 사료 위주의 사료를 급여한 한우 씨수소 정소상체 정자 체외수정 효율 조사를 통해 정자의 활용 가능성을 조사하였다. 농후 사료는 체중의 1.8%를 급여하고 양질의 티모시 건초를 자유채식 시킨 14개월령 거세우의 정소에서 분리된 정소상체 미부의 정자를 회수하고 동결 흉해 후 체외수정을 실시한 결과는 다음과 같다. 웅성전핵과 자성전핵이 형성(2PN)된 난자는 정상수정으로, 1개의 전핵(1PN), Expanded Sperm Head (ESH), Polyspermy 형태는 비정상적인 수정의 형태로 평가하였다. 정상적으로 수정된 난자의 비율은 정소상체 정자의 경우 전체 침투율은 49.7% 그리고 정상적인 2PN을 가진 난자는 18.5%를 보였으며, 대조구 정자의 전체 침투율은 54.4%로서 정소상체 정자 보다 높은 결과를 보였으나 유의적인 차이를 보이지는 않았다. 정상적으로 2PN을 형성한 비율은 36.7%로서 정소상체 정자를 이용한 정자 보다 높았으나 유의적인 차이는 없었다. 체외수정 후 발달률 조사에서 정소상체 정자의 분할률은 81.2%, 대조구 정자는 82.7%로 유사한 결과를 보였으나, 배반포 발달률은 정소상체 정자 24.4%와 대조구 정자 12.2%로 정소상체 정자를 사용한 난자의 발달에서는 유의적으로 높았다(p<0.05).

• 한국연소학회지
• /
• 제4권1호
• /
• pp.117-129
• /
• 1999

A method for the mixing augmentation of the transverse injection of fuel in a Scramjet combustor is suggested. Based on the fact that the main factor controlling the mixing characteristics in transverse injection is the effective back-pressure (the pressure around the injection hole) it is tried to make a flow expansion near the injection port in order to reduce effective back-pressure. A three dimensional Navier-Stokes code adopting the upwind method of Roe#s flux difference splitting scheme is used. The k-w SST turbulence model turbulence model is used to calculate the turbulent viscosity. It is shown that the reducing of the effective back-pressure make it possible to increase the penetration distance and to increase the mixing rate without excessive losses of stagnation pressure. Also, it is shown that the streamwise vorticity generated by baroclinic torque has great influences on the mixing process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.256-257
• /
• 2011

The development for Eco-friendly cars has been expanded as the concern about environmental pollution and a rise in gas prices. The Electric Vehicle(EV) and Plug in Hybrid Electric Vehicle(PHEV) are generally connected on distribution power systems to charge the traction batteries. The growing number of EV/PHEVs could have a effect on distribution power systems and result in overload of power utilities and power quality problems. In order to reduce the adverse effect on distribution power systems, the influence of electric vehicle loads should be evaluated. In this paper, the influence of electric vehicle loads is evaluated by using OpenDSS(Open Source Distribution System Simulator) according to the penetration rate of electric vehicle.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.9-21
• /
• 2000

In this study, the characteristics of high-pressure swirl injector have been studied using a commercial CFD code, STAR-CD and experiment to investigate the effect of the length of orifice and swirl port on the spray characteristics. Influences of swirl port angle and initial conditions have also been examined in terms of penetration depth and Sauter`s mean diameter. Computed results of the spray characteristics are compared with experimental results. The results show that the tangential velocity at the nozzle exit decreases, but the axial velocity increases as swirl port angle is increased. Hence, the static flow rate increases, but the initial spray angle decreases with increasing the swirl port angle. It is also shown that the values of the initial SMD used as input data for spray simulation influences the penetration depth and SMD. The spray pattern from the present numerical simulation agrees well with experimental result.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.49-54
• /
• 2004

In order to evaluate the stability of chatter vibration in turning precess, the micro-positioning cutting test with artificial tool vibration by piezoelectric actuation were carried out. In experiment, the phase lags between cutting forces and chip thickness variations were measured, and the dimensionless penetration-rate coefficient（$\overline{K^*}$） which is the most important parameter on the stability for chatter vibration was calculated. The results show that$\overline{K^*}$ can be applicable to the stability criterion for regenerative chatter vibration.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.85-95
• /
• 1997

This study is to investigate the optimum conditions of Nd:YAG laser beam welding for Zircaloy-4 end cap closure by optical fiber transmission. Laser welding parameters which affect the penetration depth and bead width were experimentally examined using the various beam radius by the beam quality analyzer, joint geometries of end cap and the laser parameters which mean pulse width, repetition rate and pulse energy. Also, an optimum welding speed and the effect of assistant gas with varying the flow rate of He were investigated. We found that the laser average power for the end cap welding will be 230W and rotation speed must not exceed 8 RPM, the best position of focus using optical fiber with 600.mu.m will be 2 to 3mm below the surface of the material.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3142-3147
• /
• 2008

A simple transient simulation of ground source heat pump system was carried out to investigate the effects of ground thermal conductivity on its performance. The TRNSYS code with a simple water to water heat pump model was used to compare the COP variation of the system. A new ground heat exchanger called by semi-closed loop was proposed and constructed in the real site. The effective thermal conductivity was measured using the test equipment developed by according to the line source model. The simulation results showed that highly efficient thermal conductivity of the grout material could increase the performance of the heat pump system very well. And the new ground heat exchanger showed the increased effective thermal conductivity as the penetration water flow rate(PWFR) was increased. Therefore, the performance improvement of the heat pump system using the proposed ground heat exchanger can be expected.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.236.1-236.1
• /
• 2003

Evaluation of solid surface properties is very important for formulation of solid dosage form, specially insoluble drugs. The contact angle of insoluble drugs was measured by the penetration rate into powder bed using Washburn equation and wicking method. From the measured contact angle data, the surface free energy value of pharmaceutical powders ${\gamma}$s was divided and analysized into the polar component, ${\gamma}$s$\^$p/ and the dispersion component, ${\gamma}$s$\^$d/. Furthermore, the data was interpreted for acid part, ${\gamma}$s$\^$+/ and base part, ${\gamma}$s$\^$$\square$/ of surface free energy. (omitted)