• 한국분무공학회지
• /
• 제9권1호
• /
• pp.30-36
• /
• 2004

The purpose of this study was to investigate the fuel spray characteristics that made most important at an homogeneous air fuel mixture, in a common rail direct injection type HCCI engine. As a study conducted relation which a back pressure and injection pressure are influenced to air fuel mixture characteristics, we tried to offer date even through we select suitable to a HCCI engine running condition of the fuel injection condition. To accomplish the study, to measure a injection rate of common rail type injector and to visualize and simulate a fuel spray was conducted. From the result of injection rate, a common rail injector was confirmed to appear a initial delay of 0.3msec and a latter period delay of 0.7msec. Therefore, real injection duration was determined by about 0.5msec increasing. From the result of fuel spray, the spray penetration was proportional to 1/4 exponent of atmosphere pressure. An experimental equation was deduced from the spray penetration of spray visualization experiment and the relation of injection duration and penetration was estimated in HCCI engine using an experimental equation.

• Archives of Pharmacal Research
• /
• 제8권4호
• /
• pp.205-211
• /
• 1985

The distribution of local anesthetics between the hydrocarbone interior and surface area of the lipid bilayer of liposomal membrane was calculated employeg fluorescence probe technique. The quenching of fluorescence probe technique. The quenching of fluorescence probe technique. The quenching of fluorescence of 12-(9-anthroyl) stearic acid and N-octadecyl naphthyl-2-amini-6-sulfonic acid by the local anesthetics in liposomal system was used to calculate the distribution. The Stern-Volmer equation was modified and employed for this calculation. The results showed that procaine hydrocloride and benzocaine were mainly distributed on the surface area of the lipid bilayer of the liposoal membrane, while tetracaine hydrochloride penetrated effectively into the hydrocarbon interior and showed even distribution in the lipid bilayer.

• Computers and Concrete
• /
• 제20권4호
• /
• pp.429-437
• /
• 2017

In this study, the effect of the tensile strength and ratio of disc spacing to penetration depth on the efficiency of tunnel boring machine (TBM) is investigated using Particle flow code (PFC) in two dimensions. Models with dimensions of $150{\times}70mm$ made of rocks with four different tensile strength values of 5 MPa, 10 MPa, 15 MPa and 20 MPa were separately analyzed and two "U" shape cutters with width of 10 mm were penetrated into the rock model by velocity rate of 0.1 mm/s. The spacing between cutters was also varied in this study. Failure patterns for 5 different penetration depths of 3 mm, 4 mm, 5 mm, 6 mm, and 7 mm were registered. Totally 100 indentation test were performed to study the optimal tool-rock interaction. An equation relating mechanical rock properties with geometric characteristics for the optimal TBM performance is proposed. The results of numerical simulations show that the effective rock-cutting condition corresponding to the minimum specific energy can be estimated by an optimized disc spacing to penetration depth, which, in fact, is found to be proportional to the rock's tensile strength.

• 한국항공우주학회지
• /
• 제43권5호
• /
• pp.440-448
• /
• 2015

운동에너지 막대 탄두 시스템은 기존 시스템의 장점을 결합한 새로운 형태의 요격탄두 시스템으로서 직격 파괴방식에 비해 표적 유도 정밀도에 대한 의존도가 낮을뿐더러, 고폭 파편 탄두 방식보다 더 높은 관통력을 제공해 준다는 장점이 있다. 본 논문에서는 다양한 운동에너지 탄두의 사출 방식 중 등방성운동에너지 탄두의 기폭, 전개모델을 소개하고, TATE 관통방정식을 이용하여 사출된 관통자의 관통 효과를 계산하였다. 또한 교전 성능 분석을 위한 방법을 제시하였으며, 다양한 교전 상황에 대한 몬테-칼로 시뮬레이션을 통해 최적의 교전 기하 및 기폭 시점을 도출하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.764-767
• /
• 2003

The characteristics of diesel spray have much effect on the engine performances such as power. fuel consumption rate and emissions. Therefore, the measurement of fuel spray characteristics is very important for the improvement of heat engine. The factors which control diesel spray characteristics are injection pressure, ambient temperature and density etc. Spray behaviors are visualized by using the high speed video camera and spray angle, spray penetration are measured. Experimental equations of spray penetration and spray angle were derived by using the experimental results. 1) Ambient temperature and density influence on the characteristics of diesel spray. 2) Experimental equation of spray penetration is expressed as follows 0＜t＜ $t_{b}$ ; $S_1$=11.628$\Delta$ $P^{0.485}$ $\rho$$_{a}$ $^{-0.478}$ $t^{1.337}$, $t_{b}$ ＜t; $S_2$=7.457$\Delta$ $P^{0.523}$ $\rho$$_{a}$ $^{-0.382}$ $t^{0.548}$ 3) Experimental equation of spray Angie is expressed as follows $T_{a}$ =293K; Tan($\theta$/2)=059($\rho$$_{a}$ / $\rho$$_{f}$ )$^{0.437}$, $T_{a}$ =473K; Tan($\theta$/2)=0588($\rho$$_{a}$ / $\rho$$_{f}$ )$^{0.404}$_{f}$ )$^{0.404}$

• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.160-169
• /
• 2000

Daily indoor and outdoor nitrogen dioxide ($NO_2$) concentration for 30 days were measured in 28 houses with questionnaire of housing characteristics in Brisbane, Australia. Using mass balance equation and regression analysis, penetration factors and source strength factors were calculated. The penetration factors of 27 houses except one house were between zero and 1, though penetration factor should be between zero and 1 by means of mass balance equation. Relationship between indoor and outdoor concentrations in each 27 house was calculated using regression analysis. According to the obtained linear regression equation, the slope means penetration factor and the intercept means source strength factor. Calculated mean and standard deviation of coefficients of determination ($R^2$) in electric and gas range houses were $0.70{\pm}0.13$ and $0.57{\pm}0.21$, respectively. The source strength factors were more than zero in 27 houses. Mean and standard deviation of slopes in electric and gas range houses were $0.65{\pm}0.18$ and $0.56{\pm}0.12$, respectively. Mean and standard deviation of intercepts in electric and gas range houses were $1.49{\pm}1.25$ and $5.77{\pm}3.55$, respectively. Air exchange rate and source strength were calculated from penetration factor and source strength factor, respectively. Geometric mean and standard deviation of calculated air exchange rates in 27 houses were $1.1/hr{\pm}1.5$. Presence of gas range was the most significant factor contributing to indoor $NO_2$ level in house characteristics (p=0.003). In gas range houses, source strengths ranged from 4.1 to $33.1cm^3/hr{\cdot}m^3$ with a mean $12.7cm^3/hr{\cdot}m^3$ and a standard deviation 9.8. The source strengths of gas range houses were significantly different from those of electric range houses by t-test (p<0.001)

• 대한토목학회논문집
• /
• 제26권3C호
• /
• pp.201-207
• /
• 2006

유효응력의 산정을 위해 간극수압의 측정이 필수인 지반공학 분야의 실험에서는 멤브레인을 사용하여 구속압과 간극수압의 계측을 실시하지만 구속압의 변화 등에 의해 멤브레인이 공시체 쪽으로 관입하는 현상이 발생하여 체적변형률과 유효응력의 계측치에는 오차가 포함되게 된다. 본 연구에서는 중공비틀림 전단시험장치를 사용하여 등방제하과정과 반복전단과정 및 액상화 후의 재압밀 과정에 있어서의 멤브레인 관입량 및 관입 보정식에 대한 고찰을 실시하였다. 실험 결과, 반복전단에 의해 모래의 유효응력이 20kPa 이하의 낮은 유효응력 조건에서는 보정식에 의한 멤브레인 보정량이 과대평가 되고 있음을 알 수 있으며, 이러한 보정식의 한계는 유효응력이 0에 가까워질 수록 보정량이 급격히 증가하는 것이 원인이다. 본 연구에서는 이러한 점을 감안하여 보정량의 급증을 방지하기 위한 상수의 도입에 대해서도 검토하였다. 이와 더불어 초기 상대밀도가 높거나 액상화 후의 입자 재배열 등의 밀도 변화가 일어나는 경우에도 보정식의 적용에 대한 신중한 검토가 필요하다는 점도 확인하였다.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.83-91
• /
• 1995

Surface defects in structural members are apt to be origins of fatigue cracks growth, which may cause serious failure of whole structures. Most structure has a part where stress concentrates such as welded joints, corner parts, etc. And then, analysis on crack growth and penetration from these defects, therefore, is one of the most important subjects for the reliability of LBB design. The present paper has performed an experimental and analysis on the fatigue crack propagation by variety in crack length of surface cracked plate with stress concentration part. The crack growth behavior can be explained quantitatively by using Newman-Raju equation and the stress partitioning method proposed by ASME B&P Code Sec. XI. The stress concentration factor $K_t$ has affected on the crack growth. The crack growth after penetration depends upon the initial front side crack length.

• 한국방재학회 논문집
• /
• 제9권2호
• /
• pp.45-51
• /
• 2009

지구기후모델을 이용하여 예측된 (1) 물성치와 (2) 현재 및 미래의 표면 에너지 입력상수의 가변성을 고려한 동결 및 융해깊이를 예측하기 위하여 확률론적 접근법이 도입되었다. 확률론적 접근법을 예시하기 위하여 극지방에서의 융해깊이 예측을 고려해보았다. 특히 확률론적 융해깊이 예측을 위하여 몬테카를로 시뮬레이션과 함께 Stefan 공식이 사용되었다. 시뮬레이션 결과는 물성치의 가변성을 보여주었다. 표면 에너지 입력상수와 온도 데이터는 융해깊이를 예측하는데 상당한 불확실성을 야기시킬 수 있다.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.35-41
• /
• 2000

A modified theoretical analysis of the ballistic perforation on the double and multi-layered armour plates using an upper bound method has been presented in this paper. A modified model based on the suggestion of the Awerbuch-bodner model has been adapted and extended into double and multi-layered armour plates when the plugging type of penetration has been occurred. The residual projectile speed, ballistic limit velocity and contact time during the penetration process have been derived from the equation of motion at each stage.