• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.867-872
• /
• 2005

High-pixel-density displays are now under development to meet the needs of next-generation mobile devices; methods to more efficiently build such displays are described. Displays based on subpixel rendering and RGBW technologies, known as PenTile $Matrix^{TM}$ RGBW, are shown to offer the best approach to meeting the demanding requirements of low manufacturing cost, high brightness, and low power.

• Journal of Veterinary Science
• /
• v.21 no.4
• /
• pp.68.1-68.8
• /
• 2020

A fluorescent microsphere-based immunochromatographic strip test (FICT) was developed for the rapid, sensitive, and quantitative detection of porcine reproductive and respiratory syndrome virus (PRRSV) antibodies at the pen-side. The assay was based on the formation of a sandwich immune-complex (anti-pig IgG-PRRSV antibodies-NSP7/N), which was validated by a comparison with IDEXX-ELISA using 3325 clinical specimens. The diagnostic specificity, sensitivity, and accuracy of FICT were 97.28, 93.41, and 94.95%, respectively. FICT showed a good correlation with the virus neutralization assay. Overall, a promising pen-side diagnostic tool was developed for the rapid and quantitative detection of PRRSV antibodies within 15 min.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.454-462
• /
• 1997

Thermotropic block copolyester(TLCP-b-PBN) based on poly(tetramethylene 2,6-(naphthaloyldioxy)dibenzoates)(TLCP) and poly(butylene 2,6-naphthalate)(PBN) was synthesized by solution polycondensation and melt-blended with poly(ethylene 2,6-naphthalate)(PEN) for in-situ composites. The TLCP domains showed nematic behavior in melt. The composition of block copolymer was determined from $^1H-NMR$ spectroscopy. The DSC thermogram of block copolymer revealed the presence of two major melting transitions, corresponding to the separete melting of PBN and TLCP domains. The glass transition temperature(Tg) of the PEN in the blends decreased with increasing the content of TLCP-b-PBN and the TLCP-b-PBN acted as a nucleating agent for the matrix polymers. In the 20% TLCP-b-PBN blend, well oriented TLCP fibriles were observed at temperature above the melting point of the PEN by optical microscopy. By scanning electron micrographs of cryogenically fractured surfaces of extruded blends, the TLCp domains were found to be finely and uniformely dispersed in 0.15 to $0.2{\mu}m$ size. Interfacial adhesion between the TLCP and matrix polymer was seemed to be good. Under certain condition TLCP formed a fiver structure in the PEN matrix, with thin oriented TLCP fibril in the skin region and spherical TLCP domains in the core.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.49-53
• /
• 2022

Ultra-thin glass (UTG) has been widely used in foldable display as a cover window for the protection of display and has a great potential for rollable display and various flexible electronics. The foldable display is under impact loading by bending and touch pen and exposed to other external impact loads such as drop while people are using it. These external impact loads can cause cracks or fracture to UTG because it is very thin under 100 ㎛ as well as brittle. Cracking and fracture lead to severe reliability problems for foldable smartphone. Thus, this study constructs finite element analysis (FEA) model for the pen drop test which can measure the impact resistance of UTG and conducts mechanical modeling to improve the reliability of UTG under impact loading. When a protective layer is placed to an upper layer or lower layer of UTG layer, stress mechanism which is applied to the UTG layer by pen drop is analyzed and an optimized structure is suggested for reliability improvement of UTG layer. Furthermore, maximum principal stress values applied at the UTG layer are analyzed according to pen drop height to obtain maximum pen drop height based on the strength of UTG.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1417-1426
• /
• 2011

Business still relies heavily on pen and paper for legal reasons or convenience. The handwritten document is to be converted into digitalized document for IT system to manage and process in real time. Because the previous document digitalization systems convert the handwritten documents into digitalized documents by scanning and post-processing the documents, it is difficult to seamlessly proceed the work process. This paper proposes the LiveForm, a framework for digitalizing handwritten document using digital pen and handwriting recognition technology. To prove the applicability of the proposed LiveForm, we also implement a LiveForm based service in industrial gas distribution process and analyze effects of the system. The LiveForm generates the same digital image as the handwritten document by writing up the paper with absolute coordinates by digital pen and converts the handwriting data to digital text to insert the information into back-end system. The LiveForm based system eliminates scanning for document digitalization and data input with keyboard into back-end system in paper-based information gathering. Therefore, it is possible for the LiveForm to improve work process in various business areas.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.999-1005
• /
• 2015

Bacillus-based feed additive was evaluated for its efficacy on growth performance, nutrient digestibility, fecal gas emission, and the consumption of time and amount of water for cleaning the pen of growing finishing pigs. A total of 120 growing pigs ($23.59{\pm}1.41kg$) were used in a 16-wk feeding trial. Pigs were randomly distributed into 1 of 2 treatments on the basis of body weight and sex. There were 12 replicate pens per treatment, with 5 pigs (3 barrows and 2 gilts) per pen. Dietary treatments were CON which was basal diet, and T1 which was CON+62.5 ppm microbial feed additive that provided $1.47{\times}10^8cfu$ of Bacillus organisms per gram of supplement. During the weeks 0 to 6, average daily gain (ADG) in T1 treatment was higher (p<0.05) than CON, but no improvement in average daily feed intake (ADFI) and feed efficiency (G:F) was noted. During 6 to 16 weeks, no difference (p>0.05) was noted in growth performance. However, ADG was improved (p<0.05) and overall ADFI tended (p = 0.06) to improve in T1 compared with CON. At week 6, the co-efficient of apparent total tract digestibility (CATTD) of dry matter (DM) nitrogen (N) was increased (p<0.05) in T1 compared with CON. Fecal $NH_3$ emission was decreased (p<0.05) in T1 compared with CON, at the end of 6th and 15th weeks. The time and water consumed for washing the pens were decreased (p<0.05) in T1 compared with CON. In conclusion, supplementation with Bacillus-based feed additive could improve the overall growth performances, increase the CATTD of DM and decrease the fecal $NH_3$ content and the time and water consumed in washing the pens for growing-finishing pigs.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2005

Mobile internet access using such devices as PDAs and cellular phones becomes popular as mobile technologies grow. However, the characteristics of small screen devices such as small screen size and pen-based input cause many usability problems. In this study, a human factors experiment was conducted to identify the factors affecting the usability of information search on a PDA. Factors manipulated in the experiment included use of wheel equipment, scroll dimension, and screen orientation. Task completion time, error frequency, and subjective satisfaction level were measured. In addition, various users' behavioral patterns such as scanning routes and mainly used scrolling methods were analyzed. Scroll dimension has a significant effect on task completion time. Scroll equipment and screen orientation affect subjective satisfaction level. The results could be applied to designing information structure of web sites for mobile use by providing vertical scroll and using external scroll equipments.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.5
• /
• pp.239-245
• /
• 2019

To increase the throughput of tip-based nanolithography (TBN), one approach is to use a large array of such tips working in parallel. It is important to maintain co-planarity between the tip array and the writing surface. A slight misalignment can cause large discrepancies of contact force and feature sizes. We report a capacitive proximity sensor built-in with the TBN array for leveling an arrayed polymer pen array. The device allows alignment between an array of writing tips and the writing substrate without contact and contamination. The angular sensitivity of the sensor is $0.05^{\circ}$ for an array with maximum tip-to-tip separation of 100 mm.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.251-255
• /
• 2014

A fiber diffuser sheet based on poly (ethylene naphthalate) (PEN) and poly (methylpentene) (PMP) has shown potential for liquid crystal display backlight units, but these materials have an interfacial adhesion problem. To improve the interfacial adhesion between the fibers and matrix components, we have proposed the use of amorphous poly (cyclohexane-1,4-dimethylene terephthalate) (Tritan) instead of PEN. Furthermore, the fabrication processes have been optimized and simplified to improve the optical and mechanical properties of the sheet. As a result, the most effective fiber content for achieving the best haze characteristics of a sample consisting of Tritan and PMP has been identified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.396-396
• /
• 2012

$TiO_2$ anatase nanotube arrays (NTAs) were grown by electrochemical anodization and followed annealing of Ti foil. Ethylene glycol/$NH_4F$-based organic electrolyte was used for electrolyte solution and using second anodization process to obtain free-standing NTAs. After obtaining NTAs, ITO film was deposited by sputtering process on bottom of NTAs. UV-curable NOA was used for attach free-standing NTAs on flexible plastic substrate (PEN). Solid state electrolyte (spiro-OMeTAD) was coated via spin-coating method on top of attached NTAs. Ag was deposited as a counter electrode. Under AM 1.5 simulated sunlight, optical characteristics of devices were investigated. In order to use flexible polymer substrate, processes have to be conducted at low temperature. In case of $TiO_2$ nano particles (NPs), however, crystallization of NPs at high temperature above $450^{\circ}C$ is required. Because NTAs were conducted high temperature annealing process before NTAs transfer to PEN, it is favorable for using PEN as flexible substrate. Fabricated flexible solid-state DSSCs make possible the preventing of liquid electrolyte corrosion and leakage, various application.