• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.443-446
• /
• 2003

This study was conducted to draw design rainfall for the regional design rainfall derived by the optimal distribution and method of frequency analysis. The design rainfalls were calculated by the regional and at-site analysis for Log-Pearson type III and GEV distributions and were compared with Relative efficiency(RE) which is ratio of Relative root-mean-square error(RRMSE) by the regional and at-site analysis for Log-Pearson type III and GEV distributions. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis for GEV distribution and design rainfall maps were drawn by GIS techniques.

• 대한물리치료과학회지
• /
• 제4권4호
• /
• pp.519-528
• /
• 1997

The purpose of this research were to evaluate the overall capacity of activity in hemiplegic patients caused by stroke, to learn the relationship of the overall capacity of activity with 8 out of 9 subtest of the Motor Assessment Scale (MAS) excluding general tonus subtest, and to use in creation of more efficient rehabilitation program by using Motor Assessment Scale (MAS). Twenty-four stroke patients (14 men and 10 women) were the subjects in this study. Their average age was 59.5 and they received average of 17.88 month of therapy. Collected data analysis was completed by using Statistic Analysis System (SAS). The results were as follows: 1) There was no difference in capacity of activity between right hemiplegia and left hemiplegia. 2) There was no difference in capacity of activity compared therapeutic period and age. 3) In comparing the relationship of the each subtest with the overall capacity of activity, upper arm function showed the highest relation (pearson's r = 0.914), and balance sitting (pearson's r= 0.812) and supine to sitting overside of bed (pearson'sr = 0.746) also showed large relationship. 4) Hand movement (pearson's r = -0.45) and advanced hand activity (pearson's r = -0.401) revealed relationship of general tonus with each subtest. 5) Supine to sitting over side of bed (pearson's r = 0.74), balanced sitting(pearson's r = 0.523), and sitting to standing (pearson's r = 0.723) showed large relationship with walking.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.475-478
• /
• 2003

This study was conducted to compare the design rainfall derived by the at-site and regional frequency analysis based on the regionalization of the precipitation. The regional and at-site design rainfalls were calculated by Log-Pearson type III distribution using Indirect Methods of Moments(WRC). The regional and at-site analysis for the design rainfall were tested by Monte Carlo simulation. Relative root-mean-square error(RRMSE), Relative bias(RBIAS) and Relative reduction(RR) in RRMSE were computed and compared between design rainfalls resulted from observed and simulated data using the regional and at-site analysis. It was shown that the regional analysis procedure can substantially reduce the RRMSE, RBIAS in comparison with those of at-site analysis. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• 통합자연과학논문집
• /
• 제5권4호
• /
• pp.241-245
• /
• 2012

Categorical data collected based on complex sample design is not proper for the standard Pearson multinomial-based chi-squared test because the observations are not independent and identically distributed. This study investigates effects of bias of point estimator of population proportion and its variance estimator to the standard Pearson chi-squared test statistics when the sample is collected based on complex sampling scheme. This study examines the effect under two population homogeneity test. The standard Pearson test statistic can be partitioned into two parts; the first part is the weighted sum of ${\chi}^2_1$ with eigenvalues of design matrix as their weights, and the additional second part which is added due to the biases of the point estimator and its variance estimator. Our empirical analysis shows that even though the bias of point estimator is small, Pearson test statistic is very much inflated due to underestimate the variance of point estimator. In the connection of design-based variance estimator and its design matrix, the bigger the average of eigenvalues of design matrix is, the larger relative size of which the first component part to Pearson test statistic is taking.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.609-620
• /
• 2005

In the secondary data analysis for categorical data, situations often arise in which the estimated cell variances are available, but not the full matrix of variances. In this case researchers are often inclined to use Pearson-type test statistics for homogeneity. However, for a complex sample observed cell proportions are not distributed as multinomial and Pearson-type test statistic generally is not distributed asymptotically as chi-square distribution. This paper evaluates powers for Wald test and Pearson-type test and the first order corrected test of Pearson-type test for homogeneity. The resulting power curves indicate that as the misspecification effect increases, the amount of inflation of significance level and the loss of power Pearson-type test are getting more severe.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1649-1667
• /
• 2012

In order to improve the accuracy and universality of the flow metric correlation analysis, this paper firstly analyzes the characteristics of Internet flow metrics as random variables, points out the disadvantages of Pearson Correlation Coefficient which is used to measure the correlation between two flow metrics by current researches. Then a method based on Symmetrical Uncertainty is proposed to measure the correlation between two flow metrics, and is extended to measure the correlation among multi-variables. Meanwhile, the simulation and polynomial fitting method are used to reveal the threshold value between different correlation degrees for SU method. The statistical analysis results on the common flow metrics using several traces show that Symmetrical Uncertainty can not only represent the correct aspects of Pearson Correlation Coefficient, but also make up for its shortcomings, thus achieve the purpose of measuring flow metric correlation quantitatively and accurately. On the other hand, reveal the actual relationship among fourteen common flow metrics.

• Journal of the Korean Statistical Society
• /
• 제29권4호
• /
• pp.435-441
• /
• 2000

Ko(1998, 1999) proposed certain flexible two-stage plans that could be served as one-step interim analysis in on-going clinical trials. The proposed Plans are optimal simultaneously in both a Bayes and a Neyman-Pearson sense. The Neyman-Pearson interpretation is that average expected sample size is being minimized, subject just to the two overall error rates $\alpha$ and $\beta$, respectively of first and second kind. The Bayes interpretation is that Bayes risk, involving both sampling cost and wrong decision losses, is being minimized. An example of this correspondence are given by using a binomial setting.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.40-45
• /
• 1994

The TCAD(Technology Computer Aided Design) software tool is a popular name to be able to simulate the semiconductor process and device circuit. We have developed a two-dimensional TCAD software tool included an editor, parser, each process unit, and 2D, 3D graphic routine that is Integrated Environment. The initial grid for numerical analysis is automatically generated with the geometric series that use the user default(given) line and position separated with grid interval and the nodes corresponding to each mesh point stoic the all the possible attribute. Also, we made a data structure called PIF for input or output. Methods of ion implantation in this paper arc Monte Carlo, Gaussian Pearson and Dual-Pearson. Analytical model such as Gaussian, Pearson and Dual-Pearson were considered the multilayer structure and two-dimensional tilted implantation. We simuttaneously calculated the continuity equation of impurity and point defect in diffusion simulation. Oxidation process was simulated by analytical ERFC(Complementary Error Function) model for local oxidation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.840-845
• /
• 2004

The reliability analysis for nonnormal distributions using the three level DOE(design of experiments) method was developed by Seo and Kwak in 2002. Although this method estimates only up to the first four moments(mean, standard deviation, skewness, and kurtosis) of the system response function, the result and the type of probability distribution determined by using the Pearson system are shown very good. However the accuracy is low in case of nonlinear performance function and sometimes, the level calculated is outside of the region in which the random variable is defined. In this article we suggest a modified three level DOE method to overcome these weaknesses and to obtain optimum choice for 3 levels and weights to handle nonnormal distributions. Furthermore we extend it to finding the optimum choice for 5 levels and weights to increase the accuracy in case of nonlinear performance function. A systematic procedure for reliability analysis is then proposed by using the Pearson system.

• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.125-130
• /
• 2011

확정론적 최적설계 방법은 설계 혹은 공정과정에서 발생하는 설계변수의 불확실성을 고려하지 않아 최적점이 제한조건의 경계점에 위치한다. 신뢰성기반 최적설계는 설계자가 요구하는 신뢰도를 만족하는 범위에서 목적함수가 최소가 되는 최적점을 찾는 방법이다. 이 과정은 최적설계 과정과 설계변수의 불확실성을 고려하는 신뢰성해석 과정으로 나눌 수 있다. 모멘트기반 신뢰성해석은 시스템의 통계적 모멘트를 이용하여 신뢰도를 구하는 방법이다. 일반적으로 신뢰성해석은 통계적 모멘트의 값에 따라 피어슨 시스템을 통해 시스템의 확률밀도함수를 7 가지 형태로 분류하여 신뢰도를 구한다. 하지만 피어슨 시스템에서 타입 IV 분포의 경우에는 수식이 복잡하여 다루기 어려운 문제점이 있었다. 본 논문에서는 크리깅모델을 이용하여 피어슨 시스템의 단점을 개선한 신뢰성 해석기법을 크리깅모델을 이용하여 개발하고 이를 적용하여 신뢰성기반최적설계 방법을 제안하다. 피어슨 타입 IV 의 수학 및 공학예제에 대하여 신뢰성기반최적설계를 수행하고 이를 몬테카를로 시뮬레이션을 이용하여 정확성을 검증한다.