• 원예과학기술지
• /
• 제30권6호
• /
• pp.718-724
• /
• 2012

Sugars play important roles in petal senescence of cut flowers. In the Expt. 1 of this study, the effects of different concentrations of glucose (60, 90, and $120g{\cdot}L^{-1}$) and sucrose (30, 60, and $90g{\cdot}L^{-1}$) application on the vase life, rate of flower diameter increase, rate of flower weight increase and ethylene production of cut tree peony (Paeonia suffruticosa 'Luoyang Hong') were evaluated. At the earlier stage, treatments of different concentrations of glucose and sucrose all retarded the process of flower opening and inhibited the increase of flower diameter and weight, while senescence of flowers fed with different concentrations of glucose was delayed at later stage. Flowers treated with $90g{\cdot}L^{-1}$ glucose displayed the longest vase life, which showed significant difference (P < 0.05) from those of flowers with the control and sucrose treatments. All treatments with glucose or sucrose not only retarded the decrease of flower diameter and weight, but also suppressed the ethylene production at the earlier stage and delayed the peak of ethylene evolution. In order to study the effect of exogenous sugar on the postharvest response of cut tree peony to ethylene, Expt. 2 was conducted. Cut flowers were treated with $90g{\cdot}L^{-1}$ glucose for 4 hours before (GE) or after (EG) exposed to $10{\mu}L{\cdot}L^{-1}$ ethylene for 4 hours. Generally, the opening process of flowers with GE and EG treatments was similar to that of the control, however GE treatment delayed flower senescence. Both GE and EG treatments improved flower diameter and weight, and GE treatment delayed the time of flower weight decrease. Besides, GE delayed climacteric ethylene evolution for 8 hours. All above suggest that exogenous sugars delay tree peony 'Luoyang Hong' cut flower senescence and extend flower vase life through their roles in the decrease of water loss and the suppression of sensitivity to ethylene and ethylene production.

• 한국전자파학회논문지
• /
• 제15권4호
• /
• pp.379-386
• /
• 2004

OFDM(orthogonal frequency division multiplexing) 통신 방식은 무선 고속 데이터 전송에 적합한 방식이다. 하지만 높은 PAPR(peak-to-average power ratio)의 발생으로 HPA(high power amplifier)에서 비선형 왜곡된다. 따라서 본 논문에서는 이 문제점을 개선시키기 위한 PAPR 저감 방법으로 dummy sequence를 삽입하는 새로운 방식의 SLM 기법(dummy sequence insertion - selected mapping: DSI-SLM)을 제안한다. 이 DSI-SLM 기법은 각각의 브렌치에 서로 다른 위상 factor를 곱하는 대신 각각에 일정비율의 부반송파에 dummy 시퀀스를 삽입하여 IFFT 후 가장 낮은 PAPR을 갖는 브렌치의 데이터를 전송한다. 이 방식들에 사용된 dummy 시퀀스는 송신단의 PAPR 저감만을 위해 사용하며 위상 회전 부가 정보 전송 및 복원 과정이 필요치 않아 기존 SLM에 비해 계산량 및 복잡도를 감소시킬 수 있다. 또한 PTS 방식에서 최적의 rotation factor를 찾기 위한 peak value optimization에 의한 계산량 증가 및 송신기의 시간 지연 문제 등을 해결할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1161_1162
• /
• 2009

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and $CO_2$ emissions shall be addressed as important issue in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. For such new energy saving, the energy storage system is considered for saving energy. Energy saving is possible by efficient use of regenerated energy. Regenerated energy is recycled amongst vehicles by mean of charge and discharge corresponding to powering and braking of electric vehicle operations. This energy saving contributes to cut $CO_2$ to reduce greenhouse gas emissions. Recycling regenerated energy demonstrate significant effect on peak cut of consumption energy in railway substation. Absorption of excess energy avoids regeneration failure due to high traction voltage. Therefore, the energy storage system is needed to be adopted to use regeneration energy when the vehicle is braking.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.901-904
• /
• 2001

For the c-axis oriented epitaxial YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on r-cut sapphire substrate it is necessary to deposit buffer layers. The CeO$_2$buffer layer was deposited on sapphire substrate using RF magnetron sputtering system. We investigated XRD pattern of CeO$_2$thin films at various sputtering conditions such as sputtering gas ratio, sputtering power, target to substrate distance, sputtering pressure and substrate temperature. The optimum condition was 15 mTorr with deposition pressure, 1:1.2 with $O_2$and Ar ratio and 9cm with target to substrate distance. The CeO$_2$(200) peak was notable for a deposition temperature above 75$0^{\circ}C$. The YBa$_2$Cu$_3$O$_{7-{\delta}}$ was deposited on CeO$_2$buffered r-cut sapphire substrate using pulsed laser ablation. The YBa$_2$Cu$_3$O$_{7-{\delta}}$CeO$_2$(200)/A1$_2$O$_3$thin film was exhibited a critical temperature of 89K.xhibited a critical temperature of 89K.

• 한국음향학회지
• /
• 제28권8호
• /
• pp.822-831
• /
• 2009

애자는 송전선 시스템에서 전기적으로나 기계적으로 매우 중요한 소자이다. 송전선 시스템에 설치된 이후 애자의 열화 등에 의해 고장이 난 애자를 찾아내기 위해 애자로 부터의 방사 소음을 측정하여 분석하였다. 대상으로 한 제품은 2종류의 현수 애자, COS, 2종류의 Line Poster, 피뢰기이며, 이들 제품의 정상 상태와 고장 상태의 방사 소음을 각각 측정하여 시간 파형, 주파수 스펙트럼, 피크 검출의 결과를 서로 비교하여 그 차이점을 제시하였다. 또한, 이를 바탕으로 방사 소음으로부터 고장 상태의 애자의 검출의 가능성 및 그 방법을 제시하였다.

• 한국지진공학회논문집
• /
• 제11권4호
• /
• pp.1-11
• /
• 2007

This paper verifies the difference of the seismic behavior and seismic damage of the neighboring two reinforced concrete piers damaged by the 1995 Hyogoken Nanbu earthquake. The two piers were almost the same size, carrying slightly different dead load, and were provided with the same reinforcement arrangement except the amount of longitudinal reinforcement at the bottom portion of the piers. The pier with more reinforcement was completely collapsed due to this near field earthquake by shear failure at the longitudinal reinforcement cut-off while the other was only damaged at the bottom by flexure even though the longitudinal reinforcement cut-off was also existed at the mid height of the pier. According to the results of the pseudo dynamic test, the seismic damage was recognized to be greatly dependent on the ground motion characteristics even though the employed ground motions had the same peak acceleration. The severe damage was observed when the test employed the seismic wave that had strong influence to the longer period range compared to the initial natural period of the pier. On the other hand, based on the similar model experiment, the defect of gas-pressure welded splice of longitudinal reinforcement was revealed to save the piers against collapse due to the so-called fail-safe mechanism contrary to the intuitive opinion of some researchers. It was concluded that the primary cause of the collapse of the pier was the extremely strong intensity and peculiar characteristics of the earthquake motion according to both the site-specific and the structure-specific effects.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.339-347
• /
• 2014

본 논문에서는 유연성 기판을 이용한 새로운 광대역 메타물질 구조의 흡수체를 제안하였다. 제안된 메타 물질 구조의 단위 셀은 유연성 있는 폴리이미드 기판 위의 동일 평면상에 놓여진 ELC 공진기와 cut-wire 구조로 이루어졌으며, 설계 주파수 대역 밖에서 레이더 단면적(RCS) 값을 감소시키기 위하여 제안된 구조의 금속 패턴 층은 입사 전자파의 진행 방향과 평행하게 놓았다. 총 $33{\times}45$개의 단위 셀들의 배열로 이루어진 흡수체 시작품을 제작하고, 측정한 결과, 주파수 9.06 및 15.0 GHz에서 각각 92 % 및 93 % 이상의 최대 흡수율과 75 %의 full-width at half-maximum 대역폭을 나타내었다. 제안된 금속 접지 판이 없는 메타물질 구조는 마이크로파 주파수대 광대역 흡수체로 곡면 구조에도 응용이 가능하다.

• 한국태양에너지학회 논문집
• /
• 제36권1호
• /
• pp.27-37
• /
• 2016

A simple but practical Ensemble Prediction System(EPS) for wind power forecasting was developed and evaluated using the measurement of the offshore meteorological tower, HeMOSU-1(Herald of Meteorological and Oceanographic Special Unite-1) installed at the Southwest Offshore in South Korea. The EPS developed by the Korea Institute of Energy Research is based on a simple ensemble mean of two Numerical Weather Prediction(NWP) models, WRF-NMM and WRF-ARW. In addition, the Kalman Filter is applied for real-time quality improvement of wind ensembles. All forecasts with EPS were analyzed in comparison with the HeMOSU-1 measurements at 97 m above sea level during Typhoon Bolaven episode in August 2012. The results indicate that EPS was in the best agreement with the in-situ measurement regarding (peak) wind speed and cut-out speed incidence. The RMSE of wind speed was 1.44 m/s while the incidence time lag of cut-out wind speed was 0 hour, which means that the EPS properly predicted a development and its movement. The duration of cut-out wind speed period by the EPS was also acceptable. This study is anticipated to provide a useful quantitative guide and information for a large-scale offshore wind farm operation in the decision making of wind turbine control especially during a typhoon episode.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.71-80
• /
• 2018

본 연구에서는 박스형 개착식 철도 터널의 지진 응답을 유사정적 프레임 해석으로부터 평가하였으며 취약도 곡선을 도출하였다. 지반의 영향을 평가하기 위하여 다양한 이상화된 주상도를 사용하였으며 20개의 계측지진기록을 적용하였다. 기존 연구에서 제시된 탄성 모멘트와 항복 모멘트 비로 정의된 손상지수를 사용하여 Minor, Moderate, Extensive 손상상태에 대한 취약도 곡선을 각각 최대지반가속도의 함수로 적용하였다. 연구 결과, 지반 조건은 취약도에 큰 영향을 미치는 것으로 나타났으며 이를 고려하는 곡선의 개발이 중요한 것으로 나타났다. 개발된 취약도 곡선은 기존의 연구에서 도출된 곡선들과 비교하였다. 기존에 제시된 경험적 취약도 곡선은 지반조건의 영향을 고려할 수 없으며 특히 연약 지반에서는 취약도를 과소예측하는 것으로 나타났다.