• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.249-252
• /
• 2002

we have studied the characteristics of PHEMT's with gate recess etching method. The DC characterization of PHTMT fabricated with the wide single recess methods is a maximum drain current density of 319.4 ㎃/mm and a peak transconductance of 336.7 ㎳/mm. The RF measurements were obtained in the frequency range of 1~50GHz. At 50GHz, 3.69dB of 521 gain were obtained and a current gain cut-off frequency(f$_{T}$) of 113 CH and a maximum frequency of oscillation(f$_{max}$) of 172 Ghz were achieved from this device. On the other hand, a maximum drain current of 367 mA/mm, a peak transconduclancc of 504.6 mS/mm, S$_{21}$ gain of 2.94 dB, a current gain cut-off frequency(f$_{T}$) of 101 CH and a maximum frequency of oscillation(f$_{max}$) of 113 fa were achieved from the PHEMT's fabricated by the .narrow single recess methods.methods.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.188-191
• /
• 2001

Generally, main factors of tool damage are cutting speed, feed rate and depth of cut. The increase of those factors can cause tool breakage or worsen product quality such as machining accuracy deterioration. Those three factors are concerned with cutting force. Cutting force reaches at its maximum value when cutter blade cuts away the object directly, and it is the time when tool damages are at high probability. In this study, we detect the maximum cutting force affecting tool damage and control the maximum cutting force based on the measured peak force.

• 화약ㆍ발파
• /
• 제20권2호
• /
• pp.7-19
• /
• 2002

The cut is placed high up in the section, the 1st sloping holes below the cut, and divided all the holes located below the 1st sloping holes into a certain area with longitudinal section, to lower pollution made from tunnel blasting. With the sequential blasting machine, after I first blasted holes around the cut holes by a pre-splitting method, blasted the cut area and the 1st sloping holes. The 1st and 2nd sloping holes divided areas are initiated gradually to free face upwards made by the cut. Especially, I pre-splinted contour holes previous blast the before sloping holes from the contours. The ground vibration from the earth surface just over the advance face decreased about 42.0% compare with the down blasting method under the condition of equal charge weight per delay. I controlled the crack and over break of the mother rock by pre-splitting contour holes before blast the first sloping holes from the contours. The peak values of noise and air blast by blasting decreased about 10dB more than the down blasting method. the noise and air blast diminished gradually as a round. The throw distance of the fly rock was decreased about 55%.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.406-410
• /
• 2000

Hot-wall epitaxy 방법으로 GaAs (100) 기판 위에 9 $\mu\textrm{m}$의 CdTe (111)을 완충층으로 성장하고 그 위에 in-situ로 $Hg_{1-x}Cd_x$/Te (MCT)박막을 성장하였다. 성장된 MCT박막의 2결정 x-선 요동곡선의 반치폭 값은 125 arcsec이었으며 표면 형상의 roughness는 10 nm의 작고 깨끗한 면을 나타내었다. 성장된 MCT 박막에 대한 광전류 측정으로부터 최대 peak 파장과 cut off 파장은 각각 1.1050 $\mu\textrm{m}$ (1.1220 eV)와 1.2632 $\mu\textrm{m}$ (0.9815 eV)임을 알았다 이 peak 파장은 광전도체의 intrinsic transition에 기인한 band gap에 대응하는 봉우리이다. 이로부터 MCT 박막은 1.0 $\mu\textrm{m}$에서 1.6 $\mu\textrm{m}$의 근적외선 파장 영역을 감지할 수 있는 광전도체용 검출기로 쓰일 수 있음을 알았다.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1260-1268
• /
• 2012

Recently, lack of power reserve margin was observed quite often. In this paper, we studied the method to secure power source for a short time, to cut the utility power peak load, and to reduce the users electricity bills. Emergency diesel generator of an office building is to be converted into a dual-fuel engine generator which is responsible for a portion of the peak load. Compared to the conventional diesel fuel generator, the proposed dual-fuel engine is able to reduce the generation power cost by dual-fuel combustion, and it also mitigates the building's utility power peak load by charging the building's peak load. If the dead resources (a group of emergency dual-fuel engine generators), as a Virtual Power Plant, are operating in peak time, we can significantly reduce future large power development costs. We investigated the current general purpose electricity bills as well as the records of the building electric power usage, and calculated diesel engine generator renovation costs, generation fuel costs, driving conditions, and savings in electricity bills. The proposed dual-fuel engine generation method reduces 18.1% of utility power peak load, and turned out to be highly attractive investment alternative which shows more than 27% of IRR, 76 million won of NPV, and 20~53 months of payback periods. The results of this study are expected to be useful to developing the policy & strategy of the energy department.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.309-316
• /
• 2014

본 논문에서는 초점/비초점 영상에서 깊이 지도를 효율적으로 추출하기 위하여 그래프 컷(Graph Cut)과 이산 웨이블릿 변환(Discrete Wavelet Transform)을 이용한 깊이 지도 생성 기법을 제안한다. 제안하는 방법은 우선 해당 영상을 영역 별로 처리하기 위해 그래프 컷 방법으로 각 픽셀 간의 유사도를 이용하여 분할한다. 그 다음 분할 영역을 레이블링 하여 원 영상의 분할 영역 정보를 생성한다. 그리고 이산 웨이블릿 변환을 이용하여 원 영상 내의 주파수 정보를 나타내는 LL, LH, HH, HL 부대역(Subband)을 생성한다. 마지막으로 4개의 부대역 중 영상의 초점/비초점 영역을 분석할 단서가 되는 HH, HL 대역을 이용하여 주파수 지도를 생성한 뒤 분할 영역에 따라 깊이 정보를 계산함으로써 깊이 지도를 추출한다. 제안하는 방법은 초점 정보인 블러(Blur)의 양에 따라 동적인 깊이의 할당이 가능하여 효율적인 깊이 지도의 생성이 가능하였다. 실험으로 PSNR(Peak Signal to Noise Ratio) 방법을 통해 제안하는 방법의 성능을 평가하였다.

• 한국화예디자인학연구
• /
• 제42호
• /
• pp.145-156
• /
• 2020

본 연구는 플라워샵에서 판매되는 상품들의 품목별 판매량이 많은 화훼상품과 성수기 현황을 조사하고자 하였다. 국가기술자격 화훼장식기능사 및 기사 자격을 취득한 (사)화훼장식 기사협회 회원이며 꽃집을 운영하는 자 103명을 대상으로 설문 조사를 하였다. 연구 결과 화훼상품 판매 성수기는 5월(52.0%)과 2월(24.3%)이 1, 2위로 나타났고 선정이유는 5월은 가정의 달, 스승의 날 등 2월은 인사이동, 졸업식 등이었다. 분류별 판매량이 많은 화훼상품을 조사한 결과 절화는 연간, 성수기 모두 꽃다발(51.5%%, 40.3%)과 꽃바구니(28.8%, 37.5%)가 1, 2위로 나타났고, 연간 판매량 조사에서는 6위였던(1.8%) 코사지가 성수기에는 3위(8.0%)로 판매량이 증가하였다. 분화는 연간, 성수기 모두 관엽식물(50.6%, 51.3%)과 서양란·동양란(27.4%, 28.3%)이 1, 2위로 나타났고, 연간 판매량 조사에서는 응답이 없었던 숯부작과 분재가 성수기에 각 0.7%와 2.6%로 판매량이 증가하였다. 가공화는 연간, 성수기 모두 동일하게 건조화(45.3%, 39.5%), 프리저브드 플라워(27.7%, 37.2%)가 1, 2위로 나타났고, 뒤이어, 인조화, 압화, 콜라주 순이었다.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.59-66
• /
• 2015

The production of high value-added products requires efficient processing and this constant demand for complex shape processing has led to the need for hybrid processing. In this study, the surface characteristics of hybrid machining, which combines wire-cut E.D.M and vibration, are examined. The selected experimental parameters are verticality, waveform, amplitude, peak current and frequency. The experimental results provide a guideline for selecting reasonable machining parameters. Surface roughness was improved by increasing the amplitude of the vibration.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.81-88
• /
• 2016

Recently, high-efficiency machining in the production of high-value products with complex shapes has constantly been required along with the need for hybrid machining. In this study, in addition to wire-cut Electric Discharge Machining (EDM) and vibration, we present the possibility of a hybrid process by carrying out an experiment with aluminum alloy, and the hybrid process determines the nature of the surface. The selected experimental parameters are waveform, amplitude, peak current, and two-dimensional (2D) vibration. The experimental results give the guideline for selecting reasonable machining parameters. The surface roughness was improved about 20% with increases in the amplitude of the vibration.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.100-107
• /
• 2015

Recently, high-efficiency machining in the production of high-value products with a complex shape has constantly been required with the need for hybrid machining. In this study, in addition to the wire-cut E.D.M. and vibration used to present the possibility of a hybrid process by carrying out the aluminum alloy experiment, the hybrid process determines the nature of the surface. The selected experimental parameters are horizontality, waveform, amplitude, peak current, and frequency. The experimental results give guidelines for selecting reasonable machining parameters. The surface roughness was improved by about 20% with increases in the amplitude of the vibration.