• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.472-476
• /
• 2014

The Joint Transform Correlator (JTC) has been the most suitable technique for real time optical pattern recognition and target tracking applications. This paper proposes a new application of the JTC system for an analysis of the blurring effect of the optical images caused by a defocused lens. We present the relation between the correlation peak, optical transfer function (OTF), and the amount of blurring caused by focusing error. Moreover, we show a possibility of calibrating the blurred image by simply measuring the correlation peak.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.713-717
• /
• 2014

This paper presents a beamforming technique for locating impulsive sound source. The conventional frequency-domain beamformer is advantageous for localizing noise sources for a certain frequency band of concern, but the existence of many frequency components in the wide-band spectrum of impulsive noise makes the beamforming image less clear. In contrast to a frequency-domain beamformer, it has been reported that a time-domain beamformer can be better suited for transient signals. Although both frequency- and time-domain beamformers produce the same result for the beamforming power, which is defined as the RMS value of its output, we can use alternative directional estimators such as the peak value and crest factor to enhance the performance of a time-domain beamformer. In this study, the performance of three different directional estimators, the peak, crest factor and RMS output values, are investigated and compared with the incoherent interfering noise embedded in multiple microphone signals. The proposed formula is verified via experiments in an anechoic chamber using a uniformly spaced linear array. The results show that the peak estimation of beamformer output determines the location with better spatial resolution and a lower side lobe level than crest factor and RMS estimation in noise free condition, but it is possible to accurately estimate the direction of the impulsive sound source using crest factor estimation in noisy environment with stationary interfering noise.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.55-65
• /
• 1999

Metallurgical factors influencing toughness of the Intercritically Reheated Coarse-Grained Heat Affected Zone (ICCG HAZ) of multiple welded SA508-cl.3 Reactor Pressure Vessel Steel were evaluated. The recrystallized austenite formed along the prior austenite grain boundaries and late interfaced on heating to the intercritical range was transformed to bainite and/or martensite during cooling. The newly formed martensite always included some retained austenite(M-A constituents). The characteristics(amount, hardness, density, and size) of M-A constituents were found to be strongly associated with both peak temperature and cooling time(△t8/5(2)) of last pass. Toughness in the ICCG HAZ was deteriorated with increasing amount of M-A constituents which was increased with increasing the last peak temperature within the intercritical temperature range. Meanwhile, for the same intercritical peak temperature, toughness was decreased with increasing cooling time. When cooling time was short, the dominant factor influencing toughness of the ICCG HAZ was amount of M-A constituents. However, when cooling time was lengthened, the hardness difference between M-A constituents and softened matrix(tempered martensite) was found to be the dominant factor.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.1
• /
• pp.49-54
• /
• 2009

Ventilation requirement of apartment was mandated according to building equipment standards in 2006. When ventilation unit was considering for indoor air quality maintenance, we needed energy saving and efficiency ventilation control methods. This study carried out experiment of ventilation rate 0.7 adequacy. When we lived in apartment, we assumed that sleeping time was long stayed time in unconsciousness. Experiments carried out ventilation rate 0, 0.1, 0.4 and 0.7 in environment chamber from 22 o'clock to 06 o'clock, the concentration of $CO_2$, temperature and humidity rate measured. Analyzing the results, conclusions are as follows. 1) When we sleep in bedroom, ventilation rate 0.4 meet the requirements of domestic legal standards. Conform fan of similarity law, ventilation rate 0.4 reduced power cost about 80% than 0.7. 2) In generally sleeping time 8 hours, peak point control reduced running time of ventilation unit about 43% than normal control.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.637-642
• /
• 1997

Degradation of a compound with a hydroxyl group during the course of its diffusion across the skin was investigated. Based on the experimental findings of ashortened retention time of a degradant peak from post-diffusion samples and from the ability to evaporate radioactivity from such samples, it seems that during diffusion the parent compound degrades into a more hydrophilic product which is then oxidized. A tritium label at the carbon with a hydroxyl group was released as a tritiated water. When the post-diffusion samples were left open to the air allowing evaporation of water, there was a corresponding decrease in radioactivity of such samples. There was a linear relationship between the time left open and the fraction of radioactivity lost. When such samples were fractionated by HPLC, and then had their radioactivities measured by scintillation counting, two peaks wre identified. The first peak, which may be attributable to tritiated water, was eluted at the same retention time as the solvent front. The second peak eluted at the retention time of the parent compound. When the evaporation/loss of radioactivity experiment was repeated using a $^{14}C$-labeled compound there was no significant loss of radioactivity, indicating that the earlier loss with $^{3}H$-labeled compound was related to the formation and loas sof tritiated water.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.6
• /
• pp.535-542
• /
• 2009

Purpose: This study was performed to know whether [$^{18}F$]Fluorothymidine (FLT) positron emission tomography (PET) can be used to monitor early response to radiotherapy in comparison with [$^{18}F$]Fluorodeoxyglucose (FDG) PET, and to establish the optimal imaging time for prediction of therapy response. Materials and Methods: Two patients with nasopharyngeal cancer underwent serial FLT PET and FDG PET before and during radiotherapy. Three on-treatment FLT and FDG PET scans were performed on 1 week, 2 weeks and 3 weeks (at each time of 10 Gy, 20 Gy and 30 Gy delivered). The peak standardized uptake values ($SUV_{peak}$) of primary tumors were measured on FLT and FDG PET. Then, percent changes of $SUV_{peak}$ after therapy were calculated. Results: In two patients, baseline values of $SUV_{peak}$ on FDT PET were higher than those on FLT PET (FLT vs FDG; 3.7 vs 5.0, and 5.7 vs 15.0). In patient 1, FLT $SUV_{peak}$ showed 78%, 78% and 84% of decrease on 1 week, 2 and 3 weeks after treatment, whereas FDG $SUV_{peak}$ showed 18%, 52% and 66% of decrease, respectively. In patient 2, FLT $SUV_{peak}$ showed 75%, 75% and 68% of decrease, whereas FDG $SUV_{peak}$ showed 51%, 49% and 58% of decrease, respectively. Both patients reached to complete remission after radiotherapy. Conclusion: After radiotherapy, the decrease of FLT tumor uptake preceded the decrease of FDG tumor uptake in patients with nasopharyngeal cancer, and 1 week after therapy may be appropriate time for the assessment of early response. FLT PET might be more useful than FDG PET for monitoring early response to radiotherapy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1551-1555
• /
• 2006

This study was carried out to investigate the use of three different mathematical models (Wood, Quadratic and Cubic) for describing the lactation curve of Akkaraman ewes. Data were collected from 42 ewes that were three years of age and from the same flock raised in The State Farm of $G{\ddot{o}}zl{\ddot{u}}$ in Konya Province. All ewes lambed in March. They were hand milked twice daily and the first milk test was performed with in the first month after lambing (mean = 27.8 day, SD = 4.26) in an attempt to describe the peak yield. The differences between estimated total milk yields by the models were not significant. The models were adequate for describing total milk yield. The differences between peak yields were not significant. The Wood model estimated the time of peak yield earlier than the other models and observed values (p<0.01). Especially the Cubic model's peak time was very close to really peak time (34.30 vs. 35.33 days). $R^2$ values of the models ranged from 85.85% to 96.20%. The Cubic model gave the best $R^2$ value (p<0.01). Correlation coefficients between descriptive values of the models changed from 0.32 to 1.00. Total milk yields of the models were highly correlated (above 0.99) with the total milk yield calculated by the Fleischmann method (p<0.01). As a result the Cubic model showed the best fit to the data collected from Akkaraman ewes and allowed a suitable description of the shape of the lactation curve.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.4
• /
• pp.113-122
• /
• 2017

PURPOSE: The purpose of this study was to investigate the comparison of muscle activity and mechanical loading according to the angle of ankle joint during a sit-to-stand (STS) task. METHODS: Thirty-four young participants performed the STS in a randomized trial with the ankle joint at a neutral, 15 degrees dorsiflexion and 15 degrees plantarflexion angle in a fixed sitting posture with the knee in 105 degrees flexion. Muscle activity of the tibialis anterior (TA), rectus femoris (RF), biceps femoris (BF), and gastrocnemius medialis (GCM) was measured, and the parameters calculated in relation to mechanical loading were the STS-time, maximum peak, minimum peak, and total sum of mechanical loading. RESULTS: In the dorsiflexion position, the muscle activity of the TA and GCM showed a significant increase (p<.05), and the STS time, maximum peak and total sum of mechanical loading showed a significant difference compared to that in the neutral position (p<.05). In the plantarflexion position, the muscle activity of the RF and GCM showed a significant increase (p<.05), while that of the TA showed a significant decrease (p<.05) compared to that in the neutral position. And the minimum peak was significantly increased than the neutral position (p<.05), and the maximum peak and total sum of mechanical loading were showed significant difference compared with dorsiflexion position (p<.05). CONCLUSION: These results show that there is a difference in muscle activity and mechanical loading when performing the STS movement according to the change in the ankle joint angle.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.33.2-33.2
• /
• 2010

We have investigated a relationship among the solar proton events (SPEs), coronal mass ejections (CMEs) and solar flares during the solar cycle 23 (1997-2006). Using 63 SPE dataset, we found that SPE rise time, duration time, and decrease times depend on CME speed and SPE peak intensity depends on the CME earthward direction parameter as well as CME speed and x-ray flare intensity. While inspecting the relation between SPE peak intensity and the CME earthward direction parameter, we found that there are two groups: first group consists of large 6 SPEs (> 10,000 pfu at >10 MeV proton channel of GOES satellite) and shows a very good correlation (cc=0.65) between SPE peak intensity and CME earthward direction parameter. The second group has a relatively weak SPE peak intensity and shows poor correlation between SPE peak intensity and the CME earthward direction parameter (cc=0.01). By investigating characteristics of 6 SPEs in the first group, we found that there are special common conditions of the extremely large proton events (group 1); (1) all the SPEs are associated with very fast halo CME (>1400km/s), (2) they are almost located at disk region, (3) they also accompany large flare (>M7), (4) all they are preceded by another wide CMEs, and (5) they all show helmet streamer nearby the main CME. In this presentation, we will give details of the energy spectra of the 6 SPE events from the ERNE/HED aboard the Solar and Heliospheric Observatory (SOHO), and onset time comparison among the SPE, flare, type II burst, and CME.

• Environmental and Resource Economics Review
• /
• v.17 no.2
• /
• pp.213-233
• /
• 2008

In this paper, we estimate the effects of the two most important means of summer time demand side management in Korean power market: adjustment of vacation or repair timing and the voluntary saving program. We use regression analyses to estimate how effective these two programs are in reducing the peak time demand during the summer. Our results show that adjustment of vacation or repair timing actually reduces the daily peak demand by 0.53 kWh per one kWh reported reduction calculated from the agreements between Kepco and the users. The voluntary saving program reduces the daily peak by 0.57 kWh per one kWh reported reduction calculated from the agreements between Kepco and the users. However, when we include these two effects in the same regression model, their respective estimated effects become much weaker.