• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.562-567
• /
• 2000

The Impingement of a weak shock wave discharged from the open end of a shock tube upon a flat plate was investigated using shock tube experiments and numerical simulations. Harten-Yee Total Variation Diminishing method was used to solve axisymmetric, unsteady, compressible flow governing equations. Experiments were carried out to validate the present computations. The effects of the flat plate and baffle plate sizes on the impinging flow field over the flat plate were investigated. Shock Mach number was vaned in the range from 1.05 to 1.20. The distance between the plate and shock tube was changed to investigate the effect on the peak pressure. From both the results of experiments and computations we obtained a good empirical equation to predict the peak pressure on the flat plate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.79-88
• /
• 1999

The stability and performance (peel strength) of the acrylic copolymer and various modified rosin systems were investigated. The peel strength was measured over a wide range of scaling rates, and the influence of the viscoelasticity of the PSA(pressure sensitive adhesive) was considered. In the case of miscible systems, the peak of peel strength (PSA performance) over wide peel rates was changed and modified systematically with increasing glass transition temperature of the blends. The peak of the peel strength for blended systems shifts toward the lower rate side as glass transition temperature ($T_g$) of the blend increased. The influence of esterification of the rosin on performance and stability against deterioration was greatly modified by blending with rosin of glycerol ester and rosin pentaerythritol ester. The failure mode of the blend varies with the combination with acrylic copolymer and modified rosin, and cohesive failure was found at a lower peel rate while interfacial failure was found at a high peel rate. A few systems where a single Tg could be measured, despite the fact that two phases were observed microscopically, were detected.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.45-46
• /
• 2005

The piezoelectric ZnO thin films were deposited onto Al/Si substrate in order to figure out the crystalline and the residual stress of deposited films. As the $Ar/O_2$ gas ratio is increased, c-axis orientation of deposited films is significantly enhanced and also the residual stresses of ZnO films are all compressive. They are decreased from -1.2 GPa to -950 MPa as the $Ar/O_2$ gas ratio is increased. A diaphragm-based piezoelectric microspeaker fabricated on ONO films shows about 14 mPa output pressure at 1 kHz with $8V_{peak-to-peak}$.

• Journal of Chest Surgery
• /
• v.21 no.2
• /
• pp.231-239
• /
• 1988

Currently numerous methods are in use for myocardial hypothermia as a myocardial preservation modality for cardiac operation. During cardiac ischemia after crystalloid cardioplegia[4C GIK solution], topical cold saline[Group I, a=9], topical ice slush[Group II, n=9] and topical ice chip[Group III, a=10] have been compared for myocardial surface cooling in the isolated rat heart model of cardiopulmonary bypass. During postischemic period, hemodynamic functions[aortic flow, coronary flow, peak aortic pressure and heart rate], biochemical enzymatic activities and cellular injuries with electron microscope were evaluated in this isolated rat heart perfusion model. Postischemic aortic flow, cardiac output and peak aortic pressure in Group I and Group II recovered better than Group III.[p< 0.05] Postischemic creatine kinase and lactate dehydrogenase leakages in Group II and Group III increased more than Group l and postischemic mitochondrial swelling in Group III was more severe than Group I, and Group II.[p< 0.05] These results suggest that topical cold saline was the better method than topical ice slush or topical ice chip as a myocardial preservation modality in the isolated rat heart model of cardiopulmonary bypass.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.225-226
• /
• 2012

본 논문에서는 손목과 손가락에서의 광전용적맥파(photoplethysmography:PPG)를 이용한 맥파 동시 측정에 있어서 두 신호의 peak간의 시간차와 혈압과의 관계를 비교하였다. 이를 통하여 연속적인 혈압측정방법에 대해 측정 가능성을 발견하였다. 본 논문에서는 적외선을 이용한 반사형 PPG 측정 시스템을 사용하였으며 손목과 손가락에서 동시에 측정한 신호를 측정된 혈압과 비교하였다. 이를 통하여 혈압에 따라 손목과 손가락의 PPG신호 peak간의 시간차에 일정한 변화가 있음을 발견하였고 이를 통하여 손목과 손가락사이의 PPG 신호만으로 연속혈압측정이 가능하다는 결론을 얻었다.

• Journal of the Korea society of information convergence
• /
• v.5 no.2
• /
• pp.49-58
• /
• 2012

Korea has entered into an aging society at an exceptionally high speed. Increasing aged workers give pressure on Korean companies with seniority based pay system with labor costs. The wage peak system has been introduced to Korean companies as an alternative to early retirements. The wage peak system currently adopted in Korea is mainly the aging-limit-security model. But in the future we should actively adopt the employment-extension model. To operate wage peak system successfully, I suggest introduction of the individual wage peak system, development of suitable jobs for the aged, selective application by job classification, incentive graded by performance evaluation, and working hour reduction with the decreased rate of wage.

• Atmosphere
• /
• v.23 no.1
• /
• pp.23-32
• /
• 2013

Ensemble sensitivity has been recently proposed as a method to analyze the dynamics of severe weather events. We adopt it to investigate the physical mechanism which caused the heavy rainfall over the Korean Peninsula on 6th August 2003. Two rainfall peaks existed in this severe weather event. The selected response functions are 1 hour accumulated rainfall amount of each rainfall peak. Sensitivity fields were calculated using 36 ensemble members which were generated by WRFDA. The sensitive regions for the first rainfall peak are located over the Shandong Peninsula and the Yellow Sea at 12 hours before the first rainfall peak. However, the 12-h forecast sensitivity for the second rainfall peak is revealed near Typhoon ETAU (0310) and midlatitude trough. These results show that the first rainfall peak was induced by low pressure which located over the northern part of the Korean Peninsula while the second rainfall peak was caused by the interaction between typhoon ETAU and midlatitude trough.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.1
• /
• pp.27-36
• /
• 2011

The present study examines the morning-afternoon asymmetry of the geosynchronous magnetic field strength on the dayside (magnetic local time [MLT] = 06:00~18:00) using observations by the Geostationary Operational Environmental Satellites (GOES) over a period of 9 years from February 1998 to January 2007. During geomagnetically quiet time (Kp < 3), we observed that a peak of the magnetic field strength is skewed toward the earlier local times (11:07~11:37 MLT) with respect to local noon and that the geosynchronous field strength is larger in the morning sector than in the afternoon sector. That is, there is the morning-afternoon asymmetry of the geosynchronous magnetic field strength. Using solar wind data, it is confirmed that the morning-afternoon asymmetry is not associated with the aberration effect due to the orbital motion of the Earth about the Sun. We found that the peak location of the magnetic field strength is shifted toward the earlier local times as the ratio of the magnetic field strength at MLT = 18 (B-dusk) to the magnetic field strength at MLT = 06 (B-dawn) is decreasing. It is also found that the dawn-dusk magnetic field median ratio, B-dusk/B-dawn, is decreasing as the solar wind dynamic pressure is increasing. The morning-afternoon asymmetry of the magnetic field strength appears in Tsyganenko geomagnetic field model (TS-04 model) when the partial ring current is included in TS-04 model. Unlike our observations, however, TS-04 model shows that the peak location of the magnetic field strength is shifted toward local noon as the solar wind dynamic pressure grows in magnitude. This may be due to that the symmetric magnetic field associated with the magnetopause current, strongly affected by the solar wind dynamic pressure, increases. However, the partial ring current is not affected as much as the magnetopause current by the solar wind dynamic pressure in TS-04 model. Thus, our observations suggest that the contribution of the partial ring current at geosynchronous orbit is much larger than that expected from TS-04 model as the solar wind dynamic pressure increases.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1257-1264
• /
• 2019

The traditional cuff-based method for BP(Blood Pressure) measurement is not suitable for continuous real-time BP measurement techniques. For this reason, the previous studies estimated various blood pressures by fusion with the electrocardiography (ECG) and photoplethysmogram (PPG) sensor signals. However, conventional techniques based on PPG bio-sensing measurement face many challenging issues such as noisy supply fluctuation, small pulsation, and drifting non-pulsatile. This paper proposed a novel BP estimation methods using PPG and ECG sensors, which can be derived from the relationship between PPG and ECG using PTT(Pulse Transit Time) and PWV(Pulse Wave Velocity). Unlike conventional height ratio features, which are extracted on the basis of the peaks in the PPG and ECG waveform. The proposed method can be reliably obtained even if there are missing peaks among the sensed PPG signal. The increased reliability comes from periodical estimation of the peak-to-peak interval time using ECG and PPG. After 250,000 times trials of the blood pressure measurement, the proposed estimation technique was verified with the accuracy of ±28.5% error, compared to a commercialized BP device.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.419-427
• /
• 2020

In this study, a particle image velocimetry (PIV)-based pressure estimation method was investigated, with application to the wave-in-deck loading phenomenon. An experimental study was performed in a two-dimensional wave tank using a fixed deck structure under a focused wave, obtaining local pressures by pressure sensors, global loads by load cells, and instantaneous velocity fields using the PIV measurement technique. The PIV-based pressure estimation method was applied using the Euler equation as the governing equation, and the proper time step for the wave impact pressure was studied using the normalized root-mean-square deviation. The pressure estimation method showed good agreement for the local impact pressure in comparison with the measured pressure by the pressure sensors. However, some differences were observed in the peak pressure due to the limitations of the Euler equation and the sampling rate of the measurement system. Using the estimation method, the pressure fields during wave-in-deck loading were determined in the study, with an analysis of the mechanism of impact and negative pressure occurrence.