• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.41-46
• /
• 2008

Many methods have been developed to overcome the PAPR(peak-to-average power ratio) problem. Selective mapping(SLM), partial transmit sequence(PTS), subblock phase weighting(SPW) and gradient descent(GD) are used widely to reduce the PAPR. In this paper, we present an effective PAPR reduction method that decreases the number of calculations through Radix-2 DIF IFFT procedure and GD method that transmits selected data sequence. The data sequence is constructed by choosing elements that satisfy threshold value as one part of the sequence and the rest elements of each sequence are chosen to have the lower papr operating, which yields performance improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1069-1075
• /
• 2004

In this paper, we show the equivalence between complementary code keying (CCK) codeword and coset of the first order Reed-Muller (RM) code with variables of three. The CCK codewords are Golay sequences which have peak-to-average power ratio (PAPR) of two at most and can correct one error. We propose a CCK-orthogonal frequency division multiplexing (OFDM) modem to reduce PAPR. Also, we present the performance improvement techniques by increasing the variables of four to correct three errors and reduce PAPR at least 9㏈ with this system. Although, two Fast Hadamard Transform (FHT) blocks of size 8 64 are required at the receiver, we reduce the complexity by using FHT blocks of size 8 64 and 2 4 without deteriorating the performance. We generalize our results that we may increase the variables of RM code to enhance the error correcting and PAPR reduction capabilities without increasing receiver's complexity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.15-20
• /
• 2016

In this paper, we consider selective mapping (SLM) based OFDM systems without side information, where SLM is one of the promising peak-to-average power ratio (PAPR) reduction techniques due to its simplicity and no distortion in the transmitted signal. First, we construct a new phase sequence where a part of phase sequence is replaced by an orthogonal sequence. Based on the proposed phase sequence, we propose a new scheme for detecting coherently the index of the phase sequence used in transmitter without side information. Computer simulation shows that the proposed detection scheme performs well in SLM-based OFDM systems, and specifically outperforms the existing ones when channel variation is relatively small between sub-carriers used in phase sequence detection.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.22-28
• /
• 2007

High PAPR (peak-to-average power ratio) is a major drawback of OFDM (orthogonal frequency division multiplexing) signals. In this paper, a modified SLM (selective mapping) technique that uses erasure decoding of RS (Reed-Solomon) codes is presented. At the transmitter a set of phase sequences are multiplied such that some portions of check symbols in RS-coded OFDM data blocks are phase-rotated. At the receiver, RS decoding is performed with the phase-rotated check symbols being treated as erasures. Hence, there is no need to send side information about the phase sequence selected to transmit for the lowest PAPR. In addition, the estimation process for the selected phase sequence is no longer needed at the receiver, leading to improvement in terms of complexity and performance. To evaluate the performance of this technique, the CCDF (complementary cumulative distribution function) of PAPR, the BER (bit error rate) and the decoding failure probability are compared with those of the previous SLM techniques.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.118-125
• /
• 2009

With recent advancement of high-speed, multi-gigabit data transmission capabilities, transmitters usually send data without clock signals for reduction of hardware complexity, power consumption, and cost. Therefore clock and data recovery circuits(CDR) become important to recover the clock and data signals and have been widely studied. This paper presents the design of 10Gbps CDR in 0.18$\mu$m CMOS process. A quarter-rate bang-bang phase detector is designed to reduce the power and circuit complexity, and a 4-stage LC-type VCO is used to improve the jitter characteristics. Simulation results show that the designed CDR consumes 80mW from a 1.8V supply, and exhibits a peak-to-peak jitter of 2.2ps in the recovered clock. The chip layout area excluding pads is 1.26mm$\times$1.05mm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.8-13
• /
• 2008

The high peak-to-average power ratio(PAPR) of the transmitted signals is one of the major drawbacks of the orthogonal frequency division multiplexing(OFDM). The partial transmit sequences(PTS) technique can improve the PAPR statistics of the OFDM signals. However, in the PTS technique, the computational complexity to select phase weighting factors increases exponentially with the number of sub-blocks. In this paper, a search algorithm that has no limit on the values of phase weighting factors and requires no additional operations for the search is presented. To evaluate the performance, the proposed search algorithm is compared with the full search algorithm in terms of the complementary cumulative distribution function(CCDF) of the PAPR and the computational complexity. It is shown through simulations that the proposed technique can achieve significant reductions in the computational complexity with little performance degradation compared with the full search algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.488-493
• /
• 2014

This paper presents a carrier-based pulse-width modulation(PWM) method for reducing the common-mode voltage of a three-level four-leg converter. The idea of the proposed PWM method is intuitive and easy to be implemented in digital signal processor-based converter control systems. On the basis of the analysis of space-vector PWM(SVPWM) and sinusoidal PWM(SPWM) switching patterns, the fourth leg pole voltage of the three-phase converter called "f leg pole voltage" is manipulated to reduce the common-mode voltage. To synthesize f leg pole voltage for the suppression of the common-mode voltage, positive and negative pole voltage references of f leg are calculated. An offset voltage is also deduced to prevent the distortion of a, b, and c phase voltages. The feasibility of the proposed PWM method is verified by simulation and experimental results. The common-mode voltage of the proposed PWM method in peak-to-peak value is 33% in comparison with that of the conventional SVPWM method. The transition number of the common-mode voltage is also reduced to 25%.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2006

This paper proposes a new method that reduces the complexity of the combined system, which consists of the selective mapping(SLM) and the partial transmit sequence(PTS) in the Orthogonal Frequency Division Multiplexing(OFDM). In order to reduce the Peak-to-Average Power Ratio(PAPR), many techniques have been developed such as SLM and PTS. and their combined systems. However the method that simply combines PTS and SLM to improve the effectiveness of a system increases the complexity of calculation. The scheme employed in this research suggests a system that combines PTS and SLM reducing the complexity via the N($N=2^n$)-point inverse fast Fourier transforms(IFFT), which uses the decimation in time domain not only to improve PAPR but also to reduce the amount of calculation. The proposed method reduces the complexity by multiplying a phase sequence and a subblock index to the data sequences in the middle of IFFT, which yields an optimal sequence with minimal PAPR. The superiority of the proposed method is demonstrated by simulation results and analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.2
• /
• pp.201-208
• /
• 2013

In this paper, the PTS scheme generate alternative orthogonal frequency frequency division multiplexing (OFDM) signal sequences by multiplying all the time domain samples with phase rotating vectors to find an OFDM signal having the minimum peak-to-average power ratio (PAPR). However, it needs an exhaustive search which causes large computational complexity. In order to solve this problem, we propose two efficient methods based on the crest factor. The first proposed scheme is to select time domain sample with large magnitude to calculate PAPR, and the next scheme is to calculate the absolute value of real and imaginary part of the sample at each subblock. The simulation results show that the proposed schemes achieve better PAPR reduction performance than existing PTS schemes.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2013

In this paper, we were to investigate effect of correction to muscle imbalance in lower limbs according to reduction of weight bearing methods of four point of horizontal shaft using two-belt treadmill. Participants were divided to two group according to each ten peoples who have difference of muscle function in left and right legs over 20%. Experiment progressed forty minutes a day three days a week, total four weeks and we estimated the maximal peak torque and average power for testing joint torque in hip, knee and ankle. The results showed that the correction effect of muscle imbalance to the maximal muscle strength was the most effective in hip joint. Also in knee joint, correction effect of muscular reaction was the most effective too. We thought that reduction of weight bearing methods could be positive effect to correct muscle imbalance in lower limbs.