• 제목/요약/키워드: Peak power

검색결과 2,623건 처리시간 0.028초

회생에너지를 이용한 도시철도 전력관리시스템 구축에 관한 연구 (Study for Power Management System using Regenerative Energy in Electric Railway Systems)

  • 이한상;조윤성;김형철;정호성
    • 전기학회논문지
    • /
    • 제63권1호
    • /
    • pp.191-196
    • /
    • 2014
  • For the large scale of electricity consumer, since the price for the electricity consumption depends on the peak power, the issue for peak power reduction have been being studied widely. Electric railway systems, which is one of the most representative large scale of loads, also has assignment to reduce the peak power since they have high peak power and low energy consumption load characteristics. In the aspect of the economic operation through reduction of peak power, this paper proposes a novel algorithm for power management system in electric railway systems using energy storage.

태양전지 모듈 어레이 시뮬레이션을 이용한 최대전력점 패턴분석 (Pattern Analysis of Maximum Power Point by means of Solar Cell Module Array Simulation)

  • 정지원;박인규;황국연;안태천
    • 한국지능시스템학회논문지
    • /
    • 제23권1호
    • /
    • pp.72-79
    • /
    • 2013
  • 본 논문에서는 태양광 발전시스템의 최대전력점을 추종하기 위해, 개방회로전압과 가까운 첫 번째 지역극대전력점(local peak power point)의 전압 및 전류값이 특정한 범위 내에 있을 경우, 첫 번째 지역극대점이 전역극대전력점(global peak power point)인지 판단할 수 있도록 패턴을 분석하였다. 직-병렬 어레이로 연결된 태양전지 모듈에 부분그늘문제(partial shading problem)가 발생할 경우 다수의 지역극대전력점이 관찰될 수 있어, 전역극대전력점을 찾는데 어려움이 있다. 부분선형 태양전지 모델을 이용한 태블로 해석(Tableau analysis)으로 태양전지 어레이 회로의 V-I 특성을 시뮬레이션하여 지역극대전력점과 전역극대전력점을 확인하고, 그에 해당하는 전압 및 전류 값과 V-I 특성곡선의 패턴을 분석하였다. 분석된 패턴을 통해 특정한 영역을 설정하여 첫 번째 지역극대전력점이 전역극대전력점 인지 판단하여 발전하는 경우, 첫 번째 지역극대전력점으로만 발전했을 때에 비해 효율이 향상되었다.

Real-Time Peak Shaving Algorithm Using Fuzzy Wind Power Generation Curves for Large-Scale Battery Energy Storage Systems

  • Son, Subin;Song, Hwachang
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제14권4호
    • /
    • pp.305-312
    • /
    • 2014
  • This paper discusses real-time peak shaving algorithms for a large-scale battery energy storage system (BESS). Although several transmission and distribution functions could be implemented for diverse purposes in BESS applications, this paper focuses on a real-time peak shaving algorithm for an energy time shift, considering wind power generation. In a high wind penetration environment, the effective load levels obtained by subtracting the wind generation from the load time series at each long-term cycle time unit are needed for efficient peak shaving. However, errors can exist in the forecast load and wind generation levels, and the real-time peak shaving operation might require a method for wind generation that includes comparatively large forecasting errors. To effectively deal with the errors of wind generation forecasting, this paper proposes a real-time peak shaving algorithm for threshold value-based peak shaving that considers fuzzy wind power generation.

EDFA로 증폭된 고출력 펄스 신호의 소광비 향상 (Improvement of extinction ratio of amplified pulses by incorporating a nonlinear optical loop mirror)

  • 김병준;최현범;이한협;이동한;김대연;권일범
    • 한국광학회지
    • /
    • 제14권2호
    • /
    • pp.189-193
    • /
    • 2003
  • 높은 peak 값의 광 펄스 신호를 얻기 위하여 대역통과 필터(band pass filter)를 사용한 2단 구조 erbium-doped fiber amplifier (EDFA)를 구성하여 125 W peak 값과 32 ㏈ 소광비(extinction ratio)를 갖는 펄스 신호를 얻었다. 이때 pulse off power는 79 ㎽이다. pulse off power를 낮추고 소광비를 높이기 위하여 nonlinear optical loop mirror(NOLM)을 사용하였다. NOLM 을 통과한 펄스 신호는 35 W peak 값과 0.3 ㎽ pulse off power, 50.4 ㏈ 소광비를 갖는다.

저전력 MOS 모놀리식 피크 감지기의 설계 (Design of a Low-Power MOS Monolithic Peak Detector)

  • 박광민;백경호
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.217-220
    • /
    • 2000
  • In this paper, A low-power MOS monolithic peak detector is presented. Designed for monolithic and low-power characteristics, this MOS peak detector can be integrated easily on the same chip as a module of large communication systems. The simulation results of this peak detector which was composed with four NMOSs and two capacitors show the power dissipation of 0.972㎽ and the good operations for 2㎓ operating pulse frequency. Therefore, it may be used as a functional block for various signal processing systems.

  • PDF

The Minimum PAPR Code for OFDM Systems

  • Kang, Seog-Geun
    • ETRI Journal
    • /
    • 제28권2호
    • /
    • pp.235-238
    • /
    • 2006
  • In this letter, a block code that minimizes the peak-to-average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals is proposed. It is shown that peak envelope power is invariant to cyclic shift and codeword inversion. The systematic encoding rule for the proposed code is composed of searching for a seed codeword, shifting the register elements, and determining codeword inversion. This eliminates the look-up table for one-to-one correspondence between the source and the coded data. Computer simulation confirms that OFDM systems with the proposed code always have the minimum PAPR.

  • PDF

전원 임피던스 제어를 통한 도시철도 최대전력 최적화 (Peak Power Optimization for Metro Railway using by Source Impedance Control)

  • 김한수;권오규
    • 전기학회논문지
    • /
    • 제63권6호
    • /
    • pp.841-849
    • /
    • 2014
  • Urban railway with rectifiers is connected by parallel circuits because substations are joined by the power rail. Thus, if an input voltage of a substation is increased, then the voltage of rectifiers is also increased, and which leads to an increase in the peak power of the substation. To solve this problem, this paper proposes a new method reducing the peak power of substations by adjusting the operation number of rectifiers. Its feasibility is exemplified by some simulations performed for Incheon subway Line 1 and GA(Genetic Algorithm) method has been applied to obtain the optimal input. Simulation results show that peak power can significantly be reduced using the method proposed in this paper.

자기회귀모델과 뉴로-퍼지모델로 구성된 하이브리드형태의 일별 최대 전력 수요예측 알고리즘 개발 (Development of Daily Peak Power Demand Forecasting Algorithm with Hybrid Type composed of AR and Neuro-Fuzzy Model)

  • 박용산;지평식
    • 전기학회논문지P
    • /
    • 제63권3호
    • /
    • pp.189-194
    • /
    • 2014
  • Due to the increasing of power consumption, it is difficult to construct accurate prediction model for daily peak power demand. It is very important work to know power demand in next day for manager and control power system. In this research, we develop a daily peak power demand prediction method based on hybrid type composed of AR and Neuro-Fuzzy model. Using data sets between 2006 and 2010 in Korea, the proposed method has been intensively tested. As the prediction results, we confirm that the proposed method makes it possible to effective estimate daily peak power demand than conventional methods.

요일 특성을 고려한 일별 최대 전력 수요예측 알고리즘 개발 (Development of Daily Peak Power Demand Forecasting Algorithm Considering of Characteristics of Day of Week)

  • 지평식;임재윤
    • 전기학회논문지P
    • /
    • 제63권4호
    • /
    • pp.307-311
    • /
    • 2014
  • Due to the increasing of power consumption, it is difficult to construct accurate prediction model for daily peak power demand. It is very important work to know power demand in next day for manager and control power system. In this research, we develop a daily peak power demand prediction method considering of characteristics of day of week. The proposed method is composed of liner model based on AR model and nonlinear model based on ELM to resolve the limitation of a single model. Using data sets between 2006 and 2010 in Korea, the proposed method has been intensively tested. As the prediction results, we confirm that the proposed method makes it possible to effective estimate daily peak power demand than conventional methods.

Alexandrite 레이저의 형광특성 (Flourescence characteristics of the Alexandrite Laser)

  • 윤태현
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.26-28
    • /
    • 1990
  • Cw arc 램프로 펌핑하는 Alexandrite 레이저의 형광을 optical Spectrum Analyzer를 이용하여 측정하였다. Vibronic 천이에 해당하는 광대역 형광 스펙트럼이 관측되었고, arc 램프 입력에 따른 peak 형광의 세기 및 peak intensity 파장의 입력 power 의존성을 조사하였다. 형광의 세기는 입력 power에 따라 0.16 /kw의 비율로 증가하였고, peak intensity 파장은 입력 power가 5kw 까지는 5 nm/kw 비율로 장파장쪽으로 이동하였다.

  • PDF