• 제목/요약/키워드: Peak control

검색결과 2,181건 처리시간 0.03초

수위변화에 따른 하상재료의 분광특성정보 분석 (An Analysis of Spectral Characteristic Information on the Water Level Changes and Bed Materials)

  • 강준구;이창훈;김지현;고동우;김종태
    • Ecology and Resilient Infrastructure
    • /
    • 제6권4호
    • /
    • pp.243-249
    • /
    • 2019
  • 본 연구는 드론 기반의 초분광 센서를 활용하여 수위변화에 대한 하상재료의 분광정보 차이를 분석하는 것이 목적이다. 하상재료는 흙, 자갈, 호박돌, 갈대, 식생을 대상으로 하였으며 5개 하상재료에 대한 초분광 영상촬영을 실시하고 각 재료의 분광정보를 비교 분석하였다. 수위 변화를 위해 유량조절이 가능한 실험수로를 제작하고 수로 내 하상재료를 설치하였다. 수위 조건은 0.0 m, 0.3 m, 0.6 m이며 수위에 따라 CASE를 구분하였다. 영상촬영 후 각 하상재료별 10개 포인트를 평균한 값을 분석 자료로 사용하였다. 분석 결과 흙, 자갈, 호박돌, 갈대의 파장별 반사율은 비슷한 유형을 보이지만 각 재료별 가시광선과 근적외선 영역에서는 분광정보의 고유특징이 나타났다. 또한 수위가 깊어질수록 가시광선과 근적외선 영역에서 반사율은 감소하고 있으며 감소 비율은 하상재료에 따라 차이가 발생하였다. 하상재료에 대한 고유정보는 향후 하천환경평가를 위한 기초연구 자료로 활용될 것으로 기대된다.

Collagen으로 유발된 생쥐의 관절염에 대한 당귀사역가오수유생강탕(當歸四逆加吳茱萸生薑湯)의 효과 (Effects of Danggwisayeokgaohsuyusaenggang-tang(當歸四逆加吳茱萸生薑湯) on Collagen-induced Arthritis in Mice)

  • 김민균;오민석
    • 한방재활의학과학회지
    • /
    • 제21권2호
    • /
    • pp.63-85
    • /
    • 2011
  • Objectives : This study was carried out to know the effects of Danggwisayeokgaohsuyusaenggang-tang(hereinafter referred to DST) on arthritis induced by collagen on DBA/1 OlaHsd mice. Methods : For this purpose, DST was orally administered to mouse with arthritis induced by collagen II. Cytotoxicity, high performance liquid chromatograph(HPLC) analysis, arthritis index, value of immunocyte in draining lymph node and paw joint, cytokine were measured in vivo. Results : 1. The cytotoxicity against human fibroblast cells(hFCs) was not measured in any concentration. 2. In HPLC analysis, There are high peak patterns at 8 minute(min), 12 min, 35 min, 45 min. 3. The arthritis index was decreased significantly. 4. The degree of arthritis induced damage of joint of DST group is slight compared with control group in histopathologic observation(Hematoxylin and eosin stain(H&E), Masson's trichrome(M-T) staining). 5. In total cell counts of draining lymph node(DLN) and paw joint, the cells in DLN decreased significantly on DST 200 mg/kg and the cells in paw joint decreased significantly on 200 mg/kg and 50 mg/kg. 6. In DLN, $CD4^+/CD25^+$, $CD3^+/CD69^+$, major histocompatibility complex(MHC), class-II/$CD11c^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg $CD3^+/CD8^+$ cells decreased significantly on DST 200 200 mg/kg, $CD4^+$, $CD3^+/CD44^+$ cells decreased. 7. In paw joints, $CD4^+$, $CD11b^+/Gr-1^+$ cells decreased significantly on DST 200 mg/kg and 50 mg/kg. 8. In joints, levels of $IL-1{\beta}$, IL-6, $TNF-{\alpha}$, cyclo-oxygenase-2(COX-2), NOS-II were decreased on DST 200 mg/kg and DST 50 mg/kg. 9. In analysing of cytokine in CD3/CD28 activated spleen, IL-17 was decreased significantly, IL-4 was increased significantly $INF-{\gamma}$ was decreased on DST 200 mg/kg. 10. In analysing of cytokine in collagen activated spleen, IL-17 were decreased significantly, IL-4 was increased significantly. Conclusions : This results demonstrated that DST suppressed the inflammatory progression of collagen-induced arthritis(CIA) mice and supported further studies are required to survey continuously in looking for the effective substance and mechanism in the future.

염화칼슘 농도와 반응시간에 따른 감 칼슘 알지네이트 비드의 물리적 및 관능적 특성 (Effects of Calcium Chloride Concentration and Reaction Time on Physical and Sensory Characteristics of Persimmon Calcium Alginate Beads)

  • 용동희;송민경;윤혜현
    • 한국조리학회지
    • /
    • 제18권4호
    • /
    • pp.209-221
    • /
    • 2012
  • 본 연구는 분자요리 기법인 spherification 기법을 이용하여 감(Diospyros kaki)을 구형화시켜 염화칼슘의 농도와 반응시간에 따른 감 칼슘 알지네이트 비드의 물리적 및 관능적 특성을 연구하였다. 염화칼슘의 농도(0.5, 0.75, 1.0 %)와 겔화 반응시간(2, 4, 6, 8, 10 min)에 따른 감 칼슘 알지네이트 비드의 색도 측정결과, 염화칼슘의 농도와 반응시간이 증가될수록 명도와 황색도는 감소하고 적색도는 증가하였다. 부착성을 제외한 경도, 탄력성, 씸힙성, 응집성, 복원성은 염화칼슘의 농도와 반응시간이 증가될수록 증가하는 경향을 보였다. 비드의 막 두께와 형태의 분석결과 염화칼슘의 농도와 반응시간이 증가할수록 비드의 감퓨레 속에 있는 염화칼슘과 소디움 알지네이트의 반응이 활발해져 막 두께가 두꺼워지는 경향을 나타냈다. 정량적 묘사분석 결과 염화칼슘의 농도와 반응시간이 증가할수록 입체감, 탄력성, 단단함, 씹힘성, 잔여감은 모두 증가하였으며, 노란정도, 투명성은 증가할수록 감소하는 경향을 보였다. 기호도 검사 결과 색상, 향, 맛에서는 염화칼슘의 농도와 반응시간에 따른 유의적 차이를 보이지 않았으나 질감과 전반적인 기호도에서는 염화칼슘 0.5%의 Control 시료가 가장 높은 평가를 받았다. 칼슘 알지네이트 비드의 물리적 관능적 특성에 염화칼슘의 농도와 반응시간이 영향을 끼침을 알 수 있다.

  • PDF

다공질 실리콘: 새로운 마이크로센서 및 마이크로액추에이터 재료 (Porous silicon : a new material for microsensors and microactuators)

  • 민남기;이치우;정우식;김동일
    • 전기화학회지
    • /
    • 제2권1호
    • /
    • pp.17-22
    • /
    • 1999
  • 다공질 실리콘을 이용한 마이크로센서와 마이크로액츄에이터의 연구는 현재 초기단계에 있기 때문에, 지금까지 발광 다이오드나 화학 센서 등과 같은 몇몇 응용 소자가 발표된 수준에 머물러 있다. 본 논문에서는 화학 센서와 광소자를 중심으로 다공질 실리콘 센서 및 액추에이터 연구현황을 고찰 보고하고자 한다. 정전용량형 다공질 실리콘 습도센서의 감습 특성은 비선형이였으며, 저습보다는 $40\%RH$ 이상의 고습영역에서 더 높은 감도를 나타내었다. 다공질 실리콘 $n^+-p-n^+$ 소자는 에탄올에 노출되었을 때 소자 전류가 급격히 증가하였다. 다공질 실리콘 다이어프램에 제작된 $p^+-PSi-n^+$ 다이오드는 광 스위칭 현상을 나타내어 광센서 또는 광스위치로써의 응용 가능성을 보여주었다. 다공질 실리콘에 365nm를 조사해서 얻어진 광루미네센스(PL)는 넓은 스펙트럼을 보였으며, 피크 파장은 610 nm이었다. ITO/PSi/In LED의 전계발광(EL)스펙트럼은 PL에 비해 약간 더 넓은 영역에 걸쳐 나타났으며, 피크 에너지가 단파장(535nm)으로 이동하였다.

위성 통신용 선박 탑재 능동 위상배열 안테나 시스템 (Shipboard Active Phased Array Antenna System for Satellite Communications)

  • 전순익;채종석;오승엽
    • 한국전자파학회논문지
    • /
    • 제13권10호
    • /
    • pp.1089-1097
    • /
    • 2002
  • 본 논문에서는 선박에 탑재하여 해상에서 이동 중 위성통신을 수행하는 능동 위상배열 안테나 시스템의 설계, 제작 및 시험을 소개한다. 안테나와 시스템은 광역 하이브리드 추져, 송수신 겸용 안테나 소자, 비대칭 배열, 송수신간의 간섭 억압, 및 주파수 스캔 효과를 보상하는 위상제어 기술 등의 새로운 구조와 기술을 적용한다. 안테나는 32$\times$4 이차원 배열을 가진 송수신 겸용 안테나이다. 안테나는 두개의 빔을 가진다. 안테나 사용 주파수는 수신 7.25 - 7.75 GHz 송신 7.9 - 8.4 GHz이다. 안테나 지향 이득은 수신 35.4 dBi와 송신 35.7 dBi이며, 최대 54 %의 효율을 가진다. 전자 빔 스캔 범위는 앙각 $\pm$35$^{\circ}$와 방위각 $\pm$4$^{\circ}$이다. 안테나는 방위각 360$^{\circ}$ 무한회선과 앙각 $\pm$$10^{\circ}$의 기계적 제어가 가능한 하이브리드 추적 운동을 할 수 있다. 안테나 3 dB 빔폭은 2.2$^{\circ}$이며, 부엽 레벨 -14 dB와 교차편파 억압 송신 21 dB의 특성을 가진다. 안테나는 근역전계 측정 시설을 이용하여 측정하였다. 시스템 성능은 선박 모의 운동 시뮬레이터 위에서 위성 중계기 시뮬레이터를 사용하여 시험하였다. 운동 상태에서 위성 추적 성능은 추적 오차가 3 dB 이내이다. 안테나 시스템은 변조된 위성방송 신호를 주파수 변환하여 안테나 시스템의 변조 신호 송수신 시험에 사용하였다.

InAs/InGaAs 양자점을 이용한 전계광학변조기 (Electrooptic Modulator with InAs Quantum Dots)

  • 옥성해;문연태;최영완;손창완;이석;우덕하;변영태;전영민;김선호;이종창;오재응
    • 한국광학회지
    • /
    • 제17권3호
    • /
    • pp.278-284
    • /
    • 2006
  • 본 연구에서는 광통신 시스템에서의 고속변조를 위하여 사용되는 전계광학 변조기를 구현하기 위하여 InAs 양자점(Quantum Dots)을 변조영역으로 하는 전계광학 변조기를 설계, 제작하였다. 제작한 양자점 전계광학 변조기에서 1550 nm의 파장을 가지는 입력광의 변조 특성을 측정하여 벌크(Bulk)형태의 변조영역을 가지는 동일한 구조의 전계광학 변조기와 비교하였다. 위상변조효율은 TE 모드에서 $333.3^{\circ}/V{\cdot}mm$, TM 모드에서 $300^{\circ}/V{\cdot}mm$ 로 측정되었으며, 기존의 벌크로 변조영역이 구성된 전계광학 변조기와 동일한 소자구조를 가지는 전계광학 변조기에 비해 편광의존도가 낮으며 위상변조효율이 20배 이상 향상된 결과를 얻었으며, 양자우물구조에 비하여는 3배 이상의 높은 위상변조효율을 얻었다.

고리 1호기에 대한 증기배관 파열사고 연구 (Study on the Steam Line Break Accident for Kori Unit-1)

  • Tae Woon Kim;Jung In Choi;Un Chul Lee;Ki In Han
    • Nuclear Engineering and Technology
    • /
    • 제14권4호
    • /
    • pp.186-195
    • /
    • 1982
  • SYSRAN code를 사용하여 고리 1호기의 중기배관파열사고를 분석하였다. SYSRAN code는 중성자출력과 열선속계산은 각각 점근사 중성자 운동방정식과 집중정수 모형을 이용하고 냉각수 계통 과도현상에 대해서는 전 계통을 균일한 압력으로 취급하여 질량 및 에너지 평형방정식을 이용하여 계산한다. 사고 결과를 심각하게 만드는 노심상태로 부냉각재 온도계수가 커지는 노심말기와 증기발생기의 유체함량이 가장 많은 고온 정지상태를 호기조건으로 하여, 격납용기외부의 가장 큰 배관면적인 1.4f $t^2$ 크기의 증기배관이 파열되었을때 Moody critical flow model에 따라 증기가 방출된다고 가정하여 분석하였다. 그 결과 노심의 최대 열선속은 사고후 60초에 정상상대의 38%로서 FSAR의 26%에 비해 높은 값을 나타냈으나 모든 과도현상의 경향은 FSAR의 결과와 잘 일치하였다. 민감도 조사결과 이 사고는 냉각재밀도 계수와 노심 하부공간혼합인자에 가장 민감한 것으로 나타났다. B bank중 한 개의 RCCA가 완전인출 상태에서 노심에 삽입되지 않았다고 가정했을 경우의 FSAR 분석결과인 $F_{$\Delta$H}$를 3.66으로 Fz를 1.55로 하여 DNBR을 계산해 본 결과, 최소 DNBR은 1.62가 되어 핵연료의 손상은 예상되지 않았다. 점근사중성자 운동방정식, 집중 정수모형 및 질량과 에너지평형 방정식을 이용한 계통 과도 현상모델은 발전소 전 계통의 과도 현상의 경향을 연구하는데 적합한 것으로 밝혀졌다.구하는데 적합한 것으로 밝혀졌다.

  • PDF

자가면역성 뇌척수염 흰쥐의 활성화된 신경아교세포에서 증가된 osteopontin의 발현 (Increased osteopontin expression in activated glial cells in experimental autoimmune encephalomyelitis)

  • 박석재;황인선;김규범;신태균;지영흔
    • 대한수의학회지
    • /
    • 제46권3호
    • /
    • pp.177-184
    • /
    • 2006
  • Experimental autoimmune encephalomyelitis (EAE) is a disease model of multiple sclerosis (MS) that is characterized by remittance and relapse of the disease and autoimmune and demyelinating lesions in the central nervous system (CNS). Autoimmune inflammation is maintained by secretion of a large number of protein. Previous studies have suggested that transcripts encoding osteopontin (OPN) are frequently detected in the mRNA population of MS plaques. To elucidate the functional role of OPN in initiation and development of EAE, we examined the expression and localization of OPN in the spinal cord during acute EAE. We demonstrated that OPN significantly increased at the early stage of EAE and slightly declined thereafter by western blot analysis. An immunohistochemical study revealed that OPN was constitutively expressed in some glial cells (microglia, astrocytes) of white matter and neurons in the CNS of control rats. OPN expression was shown to be increased in the same cells at the early and peak stage of EAE. To identity cells expressing OPN by double-immunofluorescence labeling, we labeled rat spinal cord sections for OPN with a monoclonal OPN antibody and with mAbs for astrocyte (GFAP), microglia/macrophage (OX42)-specific markers. The major cell types of OPN-expressing cells were activated astrocytes and microglia in the adjacent inflammatory lesions. Interestingly, OPN was mainly expressed in the end feet of astrocytes around vascular cell adhesion molecule-1 (VCAM-1) expressing endothelial cells of CNS blood vessel. These findings suggest that increased levels of OPN in activated glial cell may play an important role in the recruitment of inflammatory cells into the CNS parenchyma during EAE.

충돌 후 지면 조건에 따른 다양한 볼의 속도변화에 관한 연구 (Changes of Various Balls Velocity under the Different Surface Conditions after Impact)

  • 박진
    • 한국운동역학회지
    • /
    • 제17권1호
    • /
    • pp.91-97
    • /
    • 2007
  • The purpose of this study was to investigate the changes of various balls velocity under the different surface conditions after impact. For this study, four different balls were used which are golf ball, tang-tang ball, table tennis ball, and iron ball. And two different types of ground conditions were used which are artificial grass green and glass green. Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. To transfer the same amount of kinetic energy to the ball, pendulum putting machine was used. Analyzing the process of impact and the ball movement, a putter was digitized the whole movement but the ball was digizited within the 50cm movement. Velocities were calculated by the first central difference method(Hamill & Knutzen, 1995). Putter head velocities were about 112.2cm/s-116.2cm/s at impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Table tennis ball recorded higher ball velocities than the other ball velocities and iron ball recorded the lowest ball velocity in this group. But Table tennis ball was influenced with the frictional force and immediately was decreased at the artificial grass green condition. If an object is received the kinetic energy under the static condition(v=0cm/s), the object recorded the maximum velocity shortly after the impact and then decreased the velocity because of the frictional force. The ball distance from the start position to the peak velocity position is about 6cm-10cm under the 112.2cm/s-116.2cm/s putting velocity with putter. 0.25 seconds later after impact balls were placed 40cm distance from the original position except iron ball. In this study, ball moving distances were too short therefore it was not possible to investigate the reactions after the translational force is disappeared. Rotational force would play a major role at the end of the ball movement. Future study must accept two things. One is long distance movement of ball and the other is balanced ground. Three-piece ball is a good item to investigate the golf ball movement on the different surface conditions.

철근격자망을 사용한 슬래브-벽체 접합부의 구조성능 (Structural Performance of RC Slab-Wall Joints Reinforced by Welded Deformed Steel Bar Mats)

  • 박성식;윤영호;이범식
    • 토지주택연구
    • /
    • 제2권1호
    • /
    • pp.61-68
    • /
    • 2011
  • 본 연구는 벽식구조 아파트의 슬래브와 벽체를 철근격자망으로 배근할 경우 접합부의 구조성능을 검증하기 위해 수행되었다. 이를 위해 벽체와 연결된 불연속단의 캔틸레버형 슬래브 시험체를 사용하여 철근격자망 상부근의 정착길이와, 철근격자망의 정착부에 일반 구부림 철근을 사용하여 정착한 경우의 정착방법 및 길이를 변수로 실험을 수행하였다. 결과는 다음과 같다. (1) 슬래브-벽체 외부접합부의 철근망 시공에서 슬래브 철근망은 벽체의 철근 선까지 배근하고 이음길이를 확보한 별도의 철근을 $90^{\circ}$ 표준갈고리로 정착하는 경우, 정착길이와 단면적이 확보되면 강도 발현에 문제가 없는 것으로 나타났다. (2) 슬래브 철근망을 접합부에서 이음할 때 철근망의 철근을 벽체 속으로 매입하면 강도는 더욱 증가한다. 그러나 최고강도에 도달한 이후의 연성은 이음이 없는 것과 동일한 것으로 나타났다. (3) 슬래브-벽체 외부접합부에서 단부 모멘트에 대한 슬래브 하부 압축콘크리트의 파괴시 변형률은 일반 콘크리트 보와 비교할 때 훨씬 큰 것으로 나타났다. 이는 슬래브-벽체 접합부가 $90^{\circ}$를 이루고 있어 이에 따른 구속효과가 있기 때문인 것으로 판단된다.