• 반도체공학회 논문지
• /
• 제1권1호
• /
• pp.9-13
• /
• 2023

본 연구에서는 SnO₂ 나노입자와 Pd 금속의 이중층으로 구성된 촉매층을 갖는 AlGaN/GaN 이종접합 기반의 상온동작 수소센서를 제작하여 해당 센서의 안정성 개선 연구를 수행하였다. 제작된 센서를 고온 환경이 아닌 상온에서 수소에 노출 및 차단을 반복하며 동작 시켰을 때 시간에 따라 대기전류가 감소하는 불안정한 전류 드리프트 (current drift) 현상이 발생하였지만, 자외선 (UV) 조사를 함께 진행하면서 반복 측정을 하였을 때 해당 불안정성의 가시적인 개선 효과를 이루었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.175.2-175.2
• /
• 2014

Graphene (G) has been modified with palladium, copper, and manganese oxide nanoparticles (NPs), and their catalytic applications have been studied in C-C coupling reactions and methylmercaptan (CH3SH) decomposition reactions. In this research, graphite oxide (GO) sheets were exfoliated and oxidized from graphite powder and impregnated with metal precursors including Pd2+, Cu2+, and Mn2+. The thermal treatments of the metal impregnated GO in preferred gas environments produced Pd NPs on graphene (Pd/G), PdO NPs on GO (PdO/GO), and CuOx and MnOx NPs on graphene (CuOx/MnOx/G). In case of Pd/G and PdO/GO, the TEM images show that, although the mean size of the Pd NPs changed significantly before and after the C-C coupling reaction, that of the PdO NPs didn't, implying that the PdO/GO was superior to Pd/G in terms of the recyclability. Also, we demonstrate that the CuOx/MnOx/G exerts the excellent catalytic efficiency in CH3SH decomposition reaction comparing with conventional catalysts. The chemical and electronic structural changes were investigated using XRD and XPS.

• 센서학회지
• /
• 제23권3호
• /
• pp.207-210
• /
• 2014

$TiO_2$ oxide semiconductor is being widely studied in various applications such as photocatalyst and photosensor. Pd/$TiO_2$ gas sensor is mainly used to detect $H_2$, CO and ethanol. This study focus on increasing hydrogen detection ability of Pd/$TiO_2$ in room temperature through Al-doping. Pd/$TiO_2$ was fabricated by the hydrothermal method. Contacting to Aluminum (Al) foil led to Al doping effect in Pd/$TiO_2$ by thermal diffusion and enhanced hydrogen sensing response. $TiO_2$ nanoparticles were sized at ~30 nm of diameter from scanning electron microscope (SEM) and maintained anatase crystal structure after Al doping from X-ray diffraction analysis. Presence of Al in $TiO_2$ was confirmed by X-ray photoelectron spectroscopy at 73 eV. SEM-energy dispersive spectroscopy measurement also confirmed 2 wt% Al in Pd/$TiO_2$ bulk. The gas sensing test was performed with $O_2$, $N_2$ and $H_2$ gas ambient. Pd/Al-doped $TiO_2$ did not response $O_2$ and $N_2$ gas in vacuum except $H_2$. Finally, the normalized resistance ratio ($R_{H2on}/R_{H2off}$) of Pd/Al-doped $TiO_2$ increases about 80% compared to Pd/$TiO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1127-1130
• /
• 2013

Formation of the monodisperse submicrospheres consisting of ionic palladium(II) complexes, $[(Me_4en)Pd(L)]_2(X)_4$($Me_4en$ = N,N,N',N'-tetramethylethylenediamine; L = bis(4-(4-pyridylcarboxyl)phenyl)methane; $X^-=BF_4{^-}$ and $ClO_4{^-}$), has been carried out without any templates or additives. The submicrospheres were coated with silicates, and then calcined in air at $550^{\circ}C$ for 1 h, to efficiently form hollow-spherical $SiO_2$ submicro-reactors dotted with palladium(0) nanoparticles (PdNPs). That is, the submicrospheres act as both a template and a source of the palladium metal nanoparticles. The submicro-reactors containing nano-catalysts have been characterized by means of SEM, TEM, and XPS. Notably, the reactors were proved to be very effective for Suzuki-Miyaura cross-coupling and hydrogenation reactions.

• 한국수소및신에너지학회논문집
• /
• 제29권3호
• /
• pp.243-250
• /
• 2018

Zinc oxide (ZnO) nanorods were grown on a palladium (Pd) activated polyacrylonitrile (PAN) fiber where Pd activation was carried out in advance by the following dry process: palladium(II) bis(acetylacetonate), $Pd(acac)_2$ was sublimed, penetrated into the surface of PAN fiber and spontaneously reduced to Pd nanoparticles at $180^{\circ}C$ for various times under a nitrogen atmosphere. ZnO nanorod morphology was observed by a scanning electron microscopy (SEM) and the elemental composition was confirmed by energy-dispersive X-ray spectroscopy (EDS). The crystalline structure of ZnO nanorods was analyzed by X-ray diffraction (XRD) analysis showing Wurtzite structure consisting of hexagonal lattice. Sulfur removal characteristics were evaluated.

• 공업화학
• /
• 제33권3호
• /
• pp.302-308
• /
• 2022

사격장 피탄지에 잔류되는 고폭화약으로 인한 환경오염 문제를 해결하기 위해 표면적이 큰 나노입자를 사용한 분해반응을 연구하였다. 수질오염을 가상하여 물에 용해시킨 research department explosive (RDX)와 high melting explosive(HMX) 니트라민 폭발물에 PdO를 첨가하여 313 K에서 분해반응시켰다. 폭발물의 분해반응속도를 측정하기 위해 반응 초기부터 종료시까지 시료 손실없이 반응속도를 측정할 수 있고 스펙트럼을 통하여 반응의 진행 정도를 관찰 가능한 ¹H NMR을 사용하였다. NMR 피크의 chemical shift 및 peak intensity 분석으로 유사 1차 분해반응이 일어남을 확인하였으며, 측정된 RDX와 HMX의 분해반응 속도상수는 각각 2.10 × 10^-2과 6.35 × 10^-4 h^-1이었다. 본 연구로부터 산화금속 PdO 나노입자는 니트라민 폭발물 분해반응연구에 적용 가능함을 확인하였다.

• 한국진공학회지
• /
• 제18권4호
• /
• pp.281-287
• /
• 2009

본 연구에서는 고진공 조건에서 열기화 증착 방법으로 산화막으로 덮인 Mg 리본(MgO/Mg) 위에 Pd을 증착하였다. 고진공 속에서 만든 시료의 전자구조를 in-situ X-선 광전자 분광법 (XPS)을 통하여 분석하였고, 분석 후, FE-SEM을 통해 증착량의 증가에 따른 표면구조의 변화를 확인하였다. Pd 증착량이 1 나노미터 (nm) 이하인 경우에는 증착량 증가에 따른 Pd 나노입자 크기의 증가를 확인하였으며, Pd을 1 nm 이상의 두께로 증착시킨 경우에는 Pd 입자들의 뭉침에 의해 얇은 필름이 형성됨을 관찰하였다. Pd과 기판사이의 전하이동에 의하여 산화물/금속 계면의 Pd 원자들은 부분적으로 양전하를 띔을 확인하였다.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.39-43
• /
• 2007

The amphiphilic block copolymer (PEtOz-PCL) of poly(2-ethyl-2-oxazoline) (PEtOz) and poly(${\varepsilon}$-caprolactone) (PCL) formed spherical micellar structures with an average diameter of 26 nm in aqueous phase. Au and Pd nanoparticles with an average diameter of $2{\sim}3nm$ were prepared by using the PEtOz-PCL micelle consisting of a PEtOz shell and PCL core. The Au nanoparticles of PEtOz-PCL micelles in aqueous phase could be transferred into organic phase by using n-dodecanethiol. The use of the Pd-NP/PEtOz-PCL micelle as a nanoreactor for Suzuki cross-coupling reaction was investigated.

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.251-256
• /
• 2013

Multiwalled carbon nanotubes (MWCNTs) modified with Pd and $TiO_2$ composite catalysts were synthesized by the sol-gel method followed by solvothermal treatment at low temperature. The chemical composition and surface structure were characterized by X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Photocatalytic recycle degradation experiments were carried out under both UV and visible light irradiation in the presence of MWCNT/$TiO_2$ and Pd-MWCNT/$TiO_2$ composites. As expected, the nanosized Pd-MWCNT/$TiO_2$ photocatalysts had enhanced activity over the non Pd treated MWCNT/$TiO_2$ material in the degradation of a rhodamine B (Rh.B) solution. An increase in photocatalytic activity was observed and attributed to an increase in the photo-absorption effect by MWCNTs and the cooperative effect of Pd and $TiO_2$ nanoparticles. According to the recycled results, the as-prepared Pd-MWCNT/$TiO_2$ sample had a good effect on it.

• Advances in nano research
• /
• 제2권2호
• /
• pp.77-88
• /
• 2014

Solvothermal treatment of late transition metal acetylacetonates in a novel medium composed either of pure acetophenone or acetophenone mixtures with amino alcohols offers a general approach to uniform hydrophilic metal nanoparticles with high crystallinity and low degree of aggregation. Both pure metal and mixed-metal particles can be accesses by this approach. The produced materials have been characterized by SEM-EDS, TEM, FTIR in the solid state and by Nanoparticle Tracking Analysis in solutions. The chemical mechanisms of the reactions producing nanoparticles has been followed by NMR. Carrying out the process in pure acetophenone produces palladium metal, copper metal with minor impurity of $Cu_2O$, and NiO. The synthesis starting from the mixtures of Pd and Ni acetylacetonates with up to 20 mol% of Pd, renders in minor yield the palladium-based metal alloy along with nickel oxide as the major phase. Even the synthesis starting from a mixed solution of $Cu(acac)_2$ and $Ni(acac)_2$ produces oxides as major products. The situation is improved when aminoalcohols such as 2-aminoethanol or 2-dimethylamino propanol are added to the synthesis medium. The particles in this case contain metallic elements and pairs of individual metals (not metal alloys) when produced from mixed precursor solutions in this case.