• 한국표면공학회지
• /
• 제50권5호
• /
• pp.411-420
• /
• 2017

In this paper, two methods of making the Pd-added $SnO_2$ ($Pd-SnO_2$) powder with pure tetragonal phase by the hydrazine method were suggested and compared in terms of crystal structure, surface morphology, and alcohol gas response. One of the addition methods is to use $PdCl_2$ as a Pd source, the other is to use Pd-based organic with oleylamine (OAM). When Pd concentration was increased from 0 to 5 wt%, the average grain size of $Pd-SnO_2$ made with Pd-OAM were decreased from 32 to 12 nm. In the case of using with $PdCl_2$, grain size of the $PdCl_2$ fell to less than 10 nm. However, agglomerated and extruded surface morphology was observed for the films with Pd addition over 4 wt%. The crack-free $Pd-SnO_2$ thick films were able to successfully fill the $30{\mu}m$ gap of patterned Pt electrodes by optimized ink dropping method. Also, the 2 wt% $Pd-SnO_2$ thick film made with PdCl2 showed gas responses ($R_{air}/R_{gas}$) of 3.7, 5.7 and 9.0 at alcohol concentrations of 10, 50 and 100 ppm, respectively. On the other hand, the prepared 3 wt% $Pd-SnO_2$ thick film with Pd-OAM exhibited very excellent responses of 3.4, 6.8 and 12.2 at the equivalent measurement conditions, respectively. The 3 wt% $Pd-SnO_2$ thick film with Pd-OAM has a specific surface area of $31.39m^2/g$.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.218-227
• /
• 2003

AlGaAs/GaAs HBT 에미터 오믹 접촉을 위해 n형 InGaAs에 대한 Pd/Si/Ti/Pt 및 Pd/Si/Pd/Ti/Au 오믹 접촉 특성을 조사하였다. Pd/Si/Ti/Pt 오믹 접촉의 경우, 증착 상태에서는 접촉 비저항을 측정할 수 없을 정도의 비오믹 특성을 보였으며, $375^{\circ}C$에서 10초 동안 열처리한 경우 $5\times10^{-3}\Omega\textrm{cm}^2$의 높은 접촉 비저항을 나타내었다. 그러나 열처리 조건을 $425^{\circ}C$, 10초로 변화시킬 경우 $2\times10^{-6}\Omega\textrm{cm}^2$의 낮은 접촉 비저항을 나타내었다. Pd/Si/Pd/Ti/Au 오믹 접촉의 경우, $450^{\circ}C$까지의 열처리 동안에 전반적으로 우수한 오믹 특성을 나타내어 $400^{\circ}C$, 20초의 급속 열처리 조건에서 최저 $3.9\times10^{-7}\Omega\textrm{cm}^2$의 접촉 비저항을 나타내었다. 두 오믹 접촉 모두 오믹 재료와 InGaAs의 평활한 계면을 유지하면서 우수한 오믹 특성을 나타내어, 화합물 반도체 소자의 오믹 접촉으로 충분히 응용 가능하였다. Pd/Si/Ti/Pt 및 Pd/Si/Pd/Ti/Au를 AlGaAs/GaAs HBT의 에미터 오믹 접촉으로 사용하여 제작된 HBT 소자의 고주파 특성을 측정한 결과, 차단 주파수가 각각 63.9 ㎓ 및 74.4 ㎓로, 또한 최대공진 주파수가 각각 50.1 ㎓ 및 52.5 ㎓로 우수한 작동특성을 보였다.

• Journal of Ginseng Research
• /
• 제10권1호
• /
• pp.101-107
• /
• 1986

양분조성(N.P.K)을 달리하여 양액재배한 인삼근(2년생)에서 ginsenoside, triol(PT), diol(PD) 및 총saponin(TS)과의 관계를 단순, 다중회귀 및 standard partial regression coefficient의 검정으로 분석하였다. ginsenoside 상호간의 밀접도는 분자구조의 유이도와 관계가 깊은 것으로 나타났다. PT는 Re와 Rg1에 의존하였으며 PD의 변화는 Rb1>Rb2$\geq$Rd>Rc의 순으로 의존하였다. TS도 PD에 의존도가 커서 TS가 클수록 PT/PD가 적어졌다. PT가 커지면 PD는 더 커지므로 PT와 PT/PD는 부상관을 보였다. 근중이 커지면 모든 ginsenoside는 감소하는 경향이며 Re와는 유의성이 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.109-109
• /
• 2010

On-line partial discharge(PD) diagnostic system is the most prominent systems to diagnose insulation condition for the high voltage rotating machines. Partial discharge measuring system(PDMS) series with ceramic coupler(PD detecting sensor) installed hydro generator and high voltage motor have been measured the PD data for many years. The trend of PD magnitude in the on-line PD system increased for some machines. These machines showed a same result in the conventional off-line PD test and PD magnitude decreased after stator winding insulation cleaning. This case study show that PDMS has been proved to be good results by comparing PD magnitude with on-line and off-line PD test and it is important to plan the maintenance project for the hydro generator stator winding because PD value was decreased after insulation cleaning.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.175.2-175.2
• /
• 2014

Graphene (G) has been modified with palladium, copper, and manganese oxide nanoparticles (NPs), and their catalytic applications have been studied in C-C coupling reactions and methylmercaptan (CH3SH) decomposition reactions. In this research, graphite oxide (GO) sheets were exfoliated and oxidized from graphite powder and impregnated with metal precursors including Pd2+, Cu2+, and Mn2+. The thermal treatments of the metal impregnated GO in preferred gas environments produced Pd NPs on graphene (Pd/G), PdO NPs on GO (PdO/GO), and CuOx and MnOx NPs on graphene (CuOx/MnOx/G). In case of Pd/G and PdO/GO, the TEM images show that, although the mean size of the Pd NPs changed significantly before and after the C-C coupling reaction, that of the PdO NPs didn't, implying that the PdO/GO was superior to Pd/G in terms of the recyclability. Also, we demonstrate that the CuOx/MnOx/G exerts the excellent catalytic efficiency in CH3SH decomposition reaction comparing with conventional catalysts. The chemical and electronic structural changes were investigated using XRD and XPS.

• Tuberculosis and Respiratory Diseases
• /
• 제65권4호
• /
• pp.343-350
• /
• 2008

PD-L1 is expressed in a variety of antigen-presenting cells and provides T cell tolerance via ligation with its receptor PD-1 and B7-1 on T cells. Stimulation with lipopolysaccharide (LPS) can increase the level of PD-L1 expression in B cells and macrophages, which suggests that this molecule plays a role in the immunosuppression observed in severe sepsis. The aim of this study was to identify which of the downstream pathways of TLR4 are involved in the up-regulation of PD-L1 by LPS in macrophages. Flow cytometry was used to examine the expression of PD-L1 in RAW 264.7 macrophages stimulated with LPS. The following chemical inhibitors were used to evaluate the role of each pathway: LY294002 for PI3K/Akt, SB202190 for p38 MAPK, and U0126 for MEK. LPS induced the expression of PD-L1 in a time- and dose-dependent manner. Transfection of siRNA for TLR4 suppressed the induction of PD-L1. Pretreatment with LY294002 and SB202190 decreased the level of PD-L1 expression but U0126 did not. Overall, the PI3K/Akt and p38 MAPK pathways are involved in the up-regulation of PD-L1 expression in RAW 264.7 macrophages stimulated with LPS.

• 한국자기학회지
• /
• 제16권3호
• /
• pp.173-177
• /
• 2006

수직자기이방성을 갖는 [Pd/Co] 다층박막으로 구성된 스핀밸브 구조에서 비자성층(space layer, SL) Pd 또는 Cu의 두께와 다층박막의 반복층수 N에 따른 자기저항효과의 의존성을 연구하였다. 비자성층을 Pd보다 Cu로 사용하였을 때 더 큰 자기저항비를 얻었다. 그리고 Cu층과 고정층 사이에 Co층을 삽입하는 경우 약 3배가량 자기저항비가 증가하는 것을 관찰하였다. $Ta_{(2.1nm)}/[Pd_{(0.61)}/Co_{(0.23)}]_4/Cu_{(2.37)}/Co_{(t)}/[Pd_{(0.61)}/Co_{(0.23)}]_2/FeMn_{(10.6)}/Ta_{(2.1)}$ 구조에서 삽입된 Co층의 두께가 0.62nm 또는 1.01nm에서 최대의 자기저항비 7.4%를 얻었다.

• Journal of Power Electronics
• /
• 제4권4호
• /
• pp.217-227
• /
• 2004

A robust controller that combines the merits of the feed-back, feed-forward and model-following control for induction motor drives utilizing field orientation control is designed in this paper. The proposed controller is a two-degrees-of­freedom (2DOF) integral plus proportional & rate feedback (I-PD) speed controller combined with a model-following (2DOF I-PD MFC) speed controller. A systematic mathematical procedure is derived to find the parameters of the 2DOF I-PD MFC speed controller according to certain specifications for the drive system. Initially, we start with the I-PD feed­back controller design, then we add the feed-forward controller. These two controllers combine to form the 2DOF I-PD speed controller. To realize high dynamic performance for disturbance rejection and set point tracking characterisitics, a MFC controller is designed and added to the 2DOF I-PD controller. This combination is called a 2DOF I-PD MFC speed controller. We then study the effect of the 2DOF I-PD MFC speed controller on the performance of the drive system under different operating conditions. A computer simulation is also run to demonstrate the effectiveness of the proposed controller. The results verify that the proposed 2DOF I-PD MFC controller is more accurate and more reliable in the presence of load disturbance and motor parameter variations than a 2DOF I-PD controller without a MFC. Also, the proposed controller grants rapid and accurate responses to the reference model, regardless of whether a load disturbance is imposed or the induction machine parameters vary.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.627-640
• /
• 2008

The geometrical structures, atomic charges, and relative energies of tetracoordinated Pd complexes [PdCl3Z (Z = Cl-, Br-, OH?-, H2O, NH3, PH3), PdCl2Z2 (Z = Br-, OH?-, H2O, NH3, PH3), PdZ?2X (Z = Cl-, OH?-, H2O, NH3, PH3; X = oxalate, O2-?CCO2-), and PdZ2Y (Z = Cl?-, OH?-, H2O, NH3, PH3; Y = succinate, CO2-?CHCHCO2-?)] and the ligand exchange reactions of the Pd complexes were investigated using the ab initio second order Mller-Plesset perturbation (MP2) and Density Functional Theory (DFT) methods. The geometrical characteristics of the tetracoordinated Pd(II) complexes with mono- and bidentate ligands, the effects of the atomic charges for the charged and uncharged ligands, the (dz2-p ) interactions between the dz2-orbital of Pd(II) and the p -orbital of bidentates, and the relative stabilities between the isomers of PdCl2Z2 and PdZ2Y were investigated in detail. The potential energy surfaces for the ligand exchange reactions used for the conversions of {[PdCl2(NH3)2] + H2O} to {[PdCl(NH3)2(H2O)]+ + Cl?-?} and {[PdCl2(PH3)2] + H2O} to {[PdCl(PH3)2(H2O)]+ + Cl?-?]} were investigated. The geometrical structure variations, molecular orbital variations (HOMO and LUMO), and relative stabilities for the ligand exchange processes were also examined quantitatively.

• 한국결정학회지
• /
• 제1권2호
• /
• pp.66-75
• /
• 1990

Pd-Te계의 상평형도를 시차열분석, X선회절분석, 전자현미분석, 반사현미경을 사용해 연구하였다. 본 계의 0-50 at.%Te 부분의 새로운 상관계가 정립되었다. 본 계에는 Pd17Te4, Pd20Te7, Pd8Te3, Pd7Te3, PdgTe4, Pd3Te2, PdTe, PdTe2 등 8개의 화합물이 존재하며 이중 Pd17Te4와 Pd7Te3는 처음 보고되는 신종 화합물이다. Pd17Te4는 등축정계이며 공간군 Fd3r에 속하며 단위포 크기 (a)는 12. 678(5)차이다. PdaTe.4와Pd7Te3의 X선회절분말자료는 사방정계의 단위포 a=12.843(3), b=15.126(3), c=11.304(2)A와 단사 정계의 단위포 a=7.444(1), b=13.918(2), c=8.873 (2)il, β=92.46(2)에 의해 각각 격자지수화가 가능하였다. 본계에 존재하는 합성 화합물의 일부 물리적, 광학적 자료를 새로 보고하였다.