• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1238-1243
• /
• 2008

The root of Adenophora triphylla is widely used as traditional herbal medicine in Korea. We studied its effects on sodium nitroprusside (SNP) cytotoxicity and antioxidant genes expression in HepG2 cells. To study whether Adenophora triphylla ethylacetate extract (ATea) inhibited NO-induced cell death, HepG2 cells were preincubated for 24 hr with 50 and 100 $\mu$g/mL ATea followed by 24-hr exposure to 0.5 mM SNP (exogenous NO donor). No-induced cytotoxicity was inhibited by pretreatment of ATea, as assessed by mitochondrial dehydrogenase activity (MTT assay). We further investigated the effects of ATea on mRNA levels of various enzymes of the antioxidant system such as Cu, Zn superoxide dismutase (SOD 1), Mn SOD (SOD 2), glutathione peroxidase (GPx), catalase and several enzymes of the glutathione metabolism [glutathione reductase (GR), $\gamma$-glutamyl-cystein synthetase (GCS), glutathione-S-transferase (GST), $\gamma$-glutamyltranspeptidase ($\gamma$-GT), glucose-6-phosphate dehydrogenase (G6PD)] by RT-PCR. CAT, GCS, GR and G6PD mRNA levels were increased after treatment with ATea. The SOD 1, SOD 2, GPx, GST and $\gamma$-GT mRNA levels were not affected in ATea-treated HepG2 cells. We concluded that ATea have an indirect antioxidant effects, perhaps via induction of CAT, GCS, GR and G6PD.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.250-257
• /
• 2008

We calculate the variation of the surface stresses according to uniaxial and biaxial strains in face-centered cubic (FCC) metals. In our study, three mainly observed free surfaces of seven representative FCC metals are considered. Employed method is molecular mechanics, in which the interaction of atoms is described by empirical interatomic potentials. As uniaxial strain increases to tensile direction, the surface stresses on {100} and {110} free surfaces decrease monotonously, while those on {111} surface increase. These tendencies are the same regardless of the species of metals and interatomic potentials employed. However, when the system is under biaxial strain, surface stresses change different according to the surface directions, the species of metals, and even interatomic potentials. On {100} and {111} surfaces, heavy metals (Pt, Au) show the opposite variation to light metals (Ni, Cu). In the cases of Pd and Ag, the surface stresses reveal the opposite tendency, depending on interatomic potentials used.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.980-983
• /
• 1999

The contents of sterols and stanols in vegetable oils and mist oil were analyzed by gas chromatography using a capillary column. The total sterol contents showed high values of 0.67~0.89g/100g in corn oil, rice bran oil, red pepper seed oil and sesame oil. Mist oil, a byproduct of soybean oil manufacture, was a suitable raw material for the production of stanol since it showed high sterol content (10.2g/100g). In the hydrogenation of sterol contained in mist oil using Pd catalyst, the effects saponification of oil were examined. The conversion of sterol to stanol was improved by a factor of 4~5 through saponification of oil, compared to the reaction without saponification.

• The Journal of Internal Korean Medicine
• /
• v.29 no.2
• /
• pp.334-347
• /
• 2008

Background and Objective : Haeyeol-tang, composed of Houttuyniae Herba, Lonicerae Flos, Taraxaci Herba, and Scrophulariae Radix, is widely used for alleviating the symptom of various kinds of inflammatory pulmonary disease, including asthma and COPD. We want to know whether Haeyeol-tang has an anti-inflammatory effect by analyzing expression of pro-inflammatory cytokines. Materials and Methods : We differentiated the THP-1 cells into macrophage-like cells by treatment with PMA. Inflammation was induced by treatment with LPS and PMA. We found the safe concentration of Haeyeol-tang by using MTS assay and used PD98059 as a negative control for comparison of anti-inflammatory effect of Haeyeol-tang. Results : The RT-PCR analysis results show that the cell survival rate is over 100% within 1 ng/mL to 1 ug/mL of Haeyeol-tang and begins to decrease under 100% at 10 ug/mL. The gene expression of $IL-1{\beta}$, IL-6, IL-8, IL-10, $TNF-{\alpha}$ and $TGF-{\beta}$ levels were down-regulated when Haeyeol-tang was treated at concentrations between 1 ng/mL an 1 ug/mL on monocyte-derived macrophages. Interestingly, 1 ug/mL Haeyeol-tang-treated samples showed that the transcriptional activities of IL-8, $TNF-{\alpha}$, IL-10 and $TGF-{\beta}$ were more down-regulated than those of PD098059 $(TNF-{\alpha}$ inhibitor). At protein level, the ELISA analysis results showed that there were more remarkable (p<0.001) decreases in expression of $IL-1{\beta}$, IL-6, IL-8 and $TNF-{\alpha}$ on both the 1 ug/mL Haeyeol-tang-treated group and the PD98059-treated group than the LPS-treated group. Conclusion : We conclude that Haeyeol-tang has an anti-inflammatory effect by inhibiting expression of pro-inflammatory cytokines and chemokines at mRNA and protein levels. These results may provide us a promising way to care for general inflammatory diseases as well as inflammatory pulmonary disease, including asthma and COPD, with further clinical study.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.11-17
• /
• 2001

In this paper, we propose a polarity decision carrier recovery algorithm for high order QAM(Quadrature Amplitude Modulation), which has robust and large frequency acquisition performance in the high order QAM modem. The proposed polarity decision PD(Phase Detector) output and its variance characteristic are mathematically derived and the simulation results are compared with conventional DD(Decision-Directed) method. While the conventional DD algorithm has linear range of $3.5^{\circ}{\sim}3.5^{\circ}$, the proposed polarity decision PD algorithm has linear range as large as $-36^{\circ}{\sim}36^{\circ}$ at ${\gamma}-17.9$. The conventional DD algorithm can only acquire offsets less than ${\pm}10\;KHz$ in the case of the 256 QAM while an analog front-end circuit generally can reduce the carrier-frequency offset down to only ${\pm}100\;KHz$. Thus, in this case additional AFC or phase detection circuit for carrier recovery is required. But by adopting the proposed polarity decision algorithm, we can find the system can acquire up to ${\pm}300\;KHz$at SNR = 30dB without aided circuit.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.42-51
• /
• 1981

Boron was predeposited into p (100) Si wafer at 94$0^{\circ}C$ for 60minutes to make the back surface field. High tempreature diffusion process at 1145$^{\circ}C$ for 3 hours was immediately followed without removing boron glass to obtain high surface concentration Back boron was annealed at 110$0^{\circ}C$ for 40minutes after boron glass was removed. N+ layer was formed by predepositing with POCI3 source at 90$0^{\circ}C$ for 7~15 minutes and annealed at 80$0^{\circ}C$ for 60min1es under dry Of ambient. The triple metal layers were made by evaporating Ti, Pd, Ag in that order onto front and back of diffused wafer to form the front grid and back electrode respectively. Silver was electroplated on front and back to increase the metal thickness form 1~2$\mu$m to 3~4$\mu$m and the metal electrodes are alloyed in N2 /H2 ambient at 55$0^{\circ}C$ and followed by silicon nitride antireflection film deposition process. Under artificial illumination of 100mW/$\textrm{cm}^2$ fabricated N+PP+ cells showed typically the open circuit voltage of 0.59V and short circuit current of 103 mA with fill factor of 0.80 from the whole cell area of 3.36$\textrm{cm}^2$. These numbers can be used to get the actual total area(active area) conversion efficiency of 14.4%(16.2%) which has been improved from the provious N+P cell with 11% total area efficiency by adding P+ back.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.119-125
• /
• 1990

This paper describes fiber optic voltage sensor using EOM-BSO (Electro-Optic Modulator-Bismuth Silicon Oxcide). Transceiver has an electical/optical converter and an optical/electrical converter which consist of light emitting diode, PIN-PD, and electronic circuits. Multimode fiber cable of $100/140{\mu}m$ core/clad diameter is used for connecting the transceiver to fiber cable and fiber optic voltage sensor. Before our experiments, by applying the Maxwell equations and wave equations, We derive matrix equation on wave propagation in the BSO single crystal. And also we derive optimal equation on intensity modulation arising through an analyzer. According to experi-mental results, fiber optic voltage sensor has maximum $2.5{\%}$ error within the applied AC voltage of 800V. As the applied voltage increases, saturation values of voltage sensor also increase. This phenomenon is caused by optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optic voltage sensor in the temperature range from$-20^{\circ}C\to\60^{\circ}C$ are measured within ${\pm}0.6{\%}$. And frequency characteristics of the voltage sensor has good frequency characteristics from DC to 100kHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.839-843
• /
• 2011

ZnO nanostructures were developed on a Si (100) substrate from powder mixture of ZnO and 5 mol% Pd (ZP-5) as reactants by ${\times}$ sccm oxygen pressures(x= 0, 10, 20, 40). DTA (differential thermal analysis) result shows the Pd(5 mol%)+ZnO mixtured powder(PZ-5) is easily evaporated than pure ZnO powder. The PZ-5 mixtured powder was characterized by DTA to determine the thermal decomposition which was found to be at $800^{\circ}C$, $1,100^{\circ}C$. Weight loss(%) and ICP (inductively coupled plasma) analysis reveal that Zn vaporization is decreased by increased oxygen pressures from the PZ-5 at $1,100^{\circ}C$ for 30 mins. Needle-like ZnO nanostructures array developed from 10 sccm oxygen pressure, was well aligned vertically on the Si substrate at $1,100^{\circ}C$ for 30 mins. The lengths of the Needle-like ZnO nanostructures is about 2 ${\mu}m$ with diameters of about 65 nm. The developed ZnO nanostructures exhibited growth direction along [001] with defect-free high crystallinity. It is considered that Zn vaporization is responsible for the growth of Needle-like ZnO nanostructures by controlling the oxygen pressures. The photoluminescence spectra of ZnO nanostructures exhibited stronger 376.7 nm NBE (near band-edge emission) peak and 529.3 nm DLE (deep level energy) peak.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.130-130
• /
• 2009

This paper describes the temperature characteristics of polycrystalline 3C-SiC micro resonators. The 1.2 ${\mu}m$ and 0.4 ${\mu}m$ thick polycrystalline 3C-SiC cantilever and doubly clamped beam resonators with 60 ~ 100 ${\mu}m$ lengths were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and their fundamental resonance was measured by a laser vibrometer in vacuum at temperature range of $25{\sim}200^{\circ}C$. The TCF(Temperature Coefficient of Frequency) of 60, 80 and 100 ${\mu}m$ long cantilever resonators were -9.79, -7.72 and -8.0 $ppm/^{\circ}C$. On the other hand, TCF of 60, 80 and 100 ${\mu}m$ long doubly clamped beam resonators were -15.74, -12.55 and -8.35 $ppm/^{\circ}C$. Therefore, polycrystalline 3C-SiC resonators are suitable with RF MEMS devices and bio/chemical sensor applications in harsh environments.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1746-1750
• /
• 2007

The second-order scattering (SOS) phenomenon of the interaction of Pd nanoparticles with protein was reported and a simple, sensitive, palladium nanoparticle-based assay for trace amount of protein with SOS technique was developed. The SOS intensities were significantly enhanced due to the interaction of Pd nanoparticles with bovine serum albumin (BSA) or human serum albumin (HSA) at pH 3.5 or 4.0, respectively. The maximum SOS peak appeared at 260/520 nm (λex/λem). The optimal experiment conditions, affecting factors and the influence of some coexisting substances were checked. The SOS intensity increased proportionally with the increase of Pd concentration below 3.0 × 10?5 mol·L?1, while declined gradually above 4.0 × 10?5 mol·L?1. BSA within the range of 0.01-2.6 μg·mL?1 and HSA of 0.01-1.7 μg·mL?1 can be detected with this method and the detection limits were 2.3 and 11.2 ng·mL?1, respectively. The method was successfully applied to the quantitative detection of total protein content in human serum samples with the maximum relative standard deviation (RSD) lower than 2.6% and the recoveries over the range of 99.5-100.5%.