• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.921-925
• /
• 2000

Characteristics of Pb(Mg, Nb)O$_3$-Pb(Zr, Ti)O$_3$system thick films fabricated by a screen printing method were investigated. The buffer layer were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited Pt as a electrode by sputtering on Ag-Pb layer. The printed thick films were burned out at 650$\^{C}$ and sintered at 950$\^{C}$ in O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20㎛ and Ag-Pb layer acted as a diffusion barrier above 3㎛ thickness. The PMN-PZT thick films were screen printed on Pt/Ag-Pb(6m) and sintered by 2nd step (650$\^{C}$/20min and 950$\^{C}$/1h) using paste mixed PMN-PZT and binder in the ratio of 70:30, and the remnant polarization of thick film was 9.1$\mu$C/㎠ in this conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.22-27
• /
• 1993

we prepared 70K new BiPbAgSrCaCuO superconductor used diffusion of dual layer which composed of SrCaCuO and BiPbAgCuO compound. This method is used permeation and diffusion on partial melting point of BiPbAgCuO compound. Samples were analyzed by means of X-ray diffraction analysis, Thermal analysis, critical temperature and scanning electron microscopy. It was found that the best results were obtained for spread volume (A:B=1:0.6) and sintring time 210hours.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.281-288
• /
• 1994

According to spread volume of B(BiPbCuO) layer, composition ratio and each stage of sintering process, we studied stability of high Tc superconductor phase and generation and growth movement of superconducting phase. The dual layer composed of SrCaCuO and BiPbCuO compound were prepared to develop the Bi-2223 superconductor[108K] through interaction and diffusion during sintering process. The dual layer samples were sintered at 830.deg. C for 0-210 hours. From the result, the optimum conditions were : spread volume(A:B=1:0.6), sintering time(210h) and composition ratio(A:S $r_{2}$C $a_{2}$C $u_{2}$- $O_{x}$, B:B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$) at 830.deg. C.. C.C.C.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.5
• /
• pp.292-302
• /
• 1994

Alloy deposits of 80Sn-20Pb, electroplated on Cu-based leadframe alloy from an organic sulfonate bath were aged at $150^{\circ}C$ to form intermetallic phases between substrate and deposit, and effects of the deposit morphology, influenced by deposition conditions, on the fracture resistance of the 80Sn-20Pb deposit aged at $150^{\circ}C$ were examined. The growth rate of intermetallic compound layer on aging depended on the microstructure of deposit ; it was fastest in deposit formed using pulse current in bath without grain refining additive, but slowest in deposit formed using dc current in bath containing grain refining additive in spite of similar structure with equivalent grain size. The grain refining additive incorporated in electrodeposit appears to inhibit diffusion of atoms on aging, resulting in slow growth of intermetallic layer in the thickness direction but substantial growth in the lateral one. Density of surface cracks that were occurring when samples were subjected to the $90^{\circ}$-bending test increased with increasing the thickness of intermatallic layer on aging. For the same aged samples, the surface crack density of the sample electrodeposited from a bath containing the grain refining additive was the least due to the inhibiting effect of the additive incorporated into the deposit during electrolysis on atomic diffusion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2099-2107
• /
• 2011

Despite the PB diffusion introduced as a strategic competitive factor from the change of a retailing business, the study of PB perceived quality in a customer aspect is poor. Therefore, this study led the influential factors to retailer attribute and product attribute through overall analysis. Also, the study found the influential attributes affecting the perceived quality and analysed the influential power linking to customer satisfaction and preference through the perceived quality. The examined results of the study have known that each attribute links to customer satisfaction via the only perceived quality. The strategic PB sales advantage should be achieved as giving customers the overall perceived quality, and has shown that it can increase the customer preference for PB.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.359-364
• /
• 1991

The effects of Pb5Ge3O11 on the sinterbility and lattice variation of the semiconducting 0.15 mol% Y2O3 doped BaTiO3 have been investigated as functions of additive contents (from 0.25 mol% to 2.5 mol%) and sintering temperatures (from 110$0^{\circ}C$ to 130$0^{\circ}C$). As the amount of Pb5Ge3O11 increases, the sinterbility of BaTiO3 increases abruptly at around 115$0^{\circ}C$. During the sintering, the most of Pb+2 ions in additives penetrate into BaTiO3 lattices and Ge+4 ions present at grain boundaries. Therefore the c lattice of the BaTiO3 increases largely and then the tetragonality increases due to the diffusion of the Pb+2 ions.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.257-262
• /
• 2008

In the study it was investigated the diffusion characteristics of heavy metal pollutions such as Cu, Pb, Hg and As which was the main pollution sources of soils from abandoned mines. The pollution of Cu and Pb was caused by Mine A, that of Hg was caused by Mine 3, that of Pb was caused by Mine C and that of Cu, Pb, As was caused by Mine D. Though the high concentration was detected within 100m from abandoned mines, the low concentration was detected over than 100m from abandoned mines in all heavy metals investigated except As. It means that it was very difficult to estimate the pollution level of As caused abandoned mines. The results were discussed in the concentrations of Cu, Pb and distances showed a good relationship with 0.71 and 0.68 as the coefficient of correlation, respectively. In particular the relativity of Cu to Pb as very strong with 0.84 as the coefficient of correlation. It was consistent with the chemical behavior in soils in the case of Cu and Pb. Therefore it will be a promising approach to remove Cu and Pb with estimated values in the study.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.255-262
• /
• 1998

This study investigated the crystallization behaviour of sealing amorphous material heat-treated by conventional and microwave heating source. From X-ray diffraction and SEM analyses, it was shown that microwave heat-treated sample had well-grown $PbTiO_3$crystals and the high degree of crystallinity inspite of its heat-treated condition of shorten time and lower temperature as compared with a conventionally heat-treated sample. It was assumed that microwaves inhibit the nucleation of $PbTiO_3$crystal in nucleation stage, but promote the growth of $PbTiO_3$crystal above the critical size of crystal due to enhanced diffusion effect within the sample.

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1843-1850
• /
• 2014

PS-D2EHPA beads were prepared by immobilizing di-2-ethylhexyl-phosphoric acid (D2EHPA) with polysulfone (PSf). The removal experiments of Cu(II) and Pb(II) by the prepared PS-D2EHPA beads were conducted batchwise. The removal efficiency of Cu(II) and Pb(II) by PS-D2EHPA beads was increased with increasing pH of solution. The removal rate of Cu(II) and Pb(II) was well described by the pseudo-second-order kinetic model. The maximum removal capacity of Cu(II) and Pb(II) obtained from Langmuir isotherm were 2.58 mg/g and 12.63 mg/g, respectively. External mass transfer coefficients for the removal of Cu(II) and Pb(II) by PS-D2EHPA beads were obtained $0.61{\times}10^{-2}{\sim}5.87{\times}10^{-2}/min$ and $1.55{\times}10^{-2}{\sim}8.53{\times}10^{-2}/min$, respectively and diffusion coefficients were obtained $1.32{\times}10^{-4}{\sim}3.98{\times}10^{-4}cm^2/min$ and $1.80{\times}10^{-4}{\sim}2.28{\times}10^{-4}cm^2/min$, respectively.

• Membrane and Water Treatment
• /
• v.13 no.2
• /
• pp.73-83
• /
• 2022

In the present study, we compared the adsorption capacity of Pb (II) from contaminated water of used cardboard (UC) and a commercial powdered activated carbon (PAC), the latter has been characterized by different techniques, namely X-ray diffraction (XRD), scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), wavelength dispersion x-ray fluorescence (WDXRF), infrared spectroscopy (IR) and surface area B.E.T analyzer. The effect of various parameters, such as the pH, the contact time, the amount of adsorbent, and the temperature on the adsorption of Pb (II) on both materials was investigated. The Pb (II) adsorptions are perfectly described by a pseudo-second-order model, while the intraparticle diffusion is a decisive step after the first minutes of contact. The fit to the Langmuir and Redlich-Peterson models seems perfect for these adsorption reactions. (PAC) showed a greater affinity for Pb (II) compared to (UC) and the adsorption of Pb (II) ions is strongly pH-dependent, on the other hand, the increase in temperature doesn't have much influence on the two solids. This study showed that the capacity of (UC) to adsorb Pb (II) from an aqueous solution is greater than two-thirds of that of (PAC).