• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.654-660
• /
• 1998

In preparing PSZT powder by hydrothermal synthesis, effects of reaction temperature, concentration of raw materials and mineralizer on crystallinity, particle size distribution, and dielectric constant were investigated. By varying the concentration of mineralizer and the ratio of Pb to Sr or Zr to Ti, crystalline PSZT powder, having the mean particle size of $0.3{\sim}15{\mu}m$, was prepared by hydrothermal synthesis in the temperature range of $120{\sim}200^{\circ}C$ for a 2h reaction. PSZT ceramics, having dielectric constant of 1000~3000, were prepared at $1150^{\circ}C$ for a 2h sintering reaction of the PSZT powders. Experimental results showed that the weight mean particle size of $0.5{\mu}m$ was obtained when the concentration of KOH in the solution was 10 wt % and the ratio of Pb to Sr was 0.95/0.05, that of Zr to Ti was 0.52/0.48. It also showed that the ceramics of dielectric constant of 2900 were prepared through sintering of this PSZT powder. Size of PSZT particles became smaller with its narrow distribution as the concentration of KOH increased up to 10 wt %. However, it came to be larger at this concentration and above. By adding small amount of Sr that would not affect that crystallinity of particles we can improve dielectric property of sintered materials. Addition of Zr may shift the major crystal phase of synthetic PSZT powder from tetragonal to rhombohedral phase.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.292-303
• /
• 2018

The particle sizes and heavy metal concentrations (Pb, Zn, Cu, Cd, Hg, As, Cr, Ni, Li, Al) of surface sediments of the Yeongsan River were analyzed to assess the distribution and pollution level of heavy metals. The distribution of particle sizes was dominated by sand in the upstream sites (MS1-MS7) and by silt loam in the downstream sites (MS8-ML3), but MS3 and MS6, located slightly upstream of the two weirs, were found to be loamy sand and silt loam, respectively. The concentrations of Pb, Zn, Cu, Cd and Hg were higher at the upstream sites, while As, Cr, Ni and Li were higher at the downstream sites. The heavy metals of crustal origin (As, Cr, Ni and Li) were strongly correlated with particle size, while the other heavy metals (Pb, Zn, Cu, Cd and Hg) were weakly correlated with particle size. Considering their concentrations, most of heavy metals were evaluated as having almost no toxic effects on benthic organisms, at all sites. In addition, anthropogenic contamination by the $I_{geo}$, EF and CF were found to have no impact at most sites, with only low levels of pollution at the others. Using the PLI method, the MS2 and MS3 sites, located upstream, were assessed to be affected by anthropogenic contamination. Most importantly, Zn, Cu and Hg were found to be the elements responsible for most pollution, and they were highest at the upstream sites, implying pollution by domestic sewage and urban discharge.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.61-72
• /
• 2022

We investigated the electrochemical behavior of Sn (93.0 %)-Ag (4.06 %)-Cu (0.89 %) during electrolysis of Pb-free solder waste to recover tin and silver. A thin strip of the solder waste produced by high-temperature melting and casting was used as a working electrode to perform electrochemical analysis. During anodic polarization, the current peak of an active region decreased with an increase in the concentration of sulfuric acid used as an electrolyte. This resulted in the electro-dissolution of the working electrode in the electrolyte (1.0 molL^-1 sulfuric acid) for a constant current study. The study revealed that the thickening of an anode slime layer at the working surface continuously increased the electrode potential of the working electrode. At 10 mAcm^-2, the dissolution reaction continued for 25 h. By contrast, at 50 mAcm^-2, a sharp increase in the electrode potential stopped the dissolution in 2.5 h. During dissolution, silver enrichment in the anode slime reached 94.3% in the 1 molL^-1 sulfuric acid electrolyte containing a 0.3 molL^-1 chlorine ion, which was 12.7% higher than that without chlorine addition. Moreover, the chlorine enhanced the stability of the dissolved tin ions in the electrolyte as well as the current efficiency of tin electro-deposition at the counter electrode.

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.269-278
• /
• 2023

The pollution status of heavy metals in the soils of children's playground was investigated for a sustainable soil environment in urban parks of Seoul. As sampling sites, 281 locations were selected from a 7 districts in the Seoul city. The overall mean concentrations of the heavy metals (Cd 0.21 mg/kg, Cu 5.97 mg/kg, As 2.40 mg/kg, Pb 7.55 mg/kg, Zn 34.08 mg/kg, Ni 4.22 mg/kg, Hg 0.02 mg/kg and Cr6+ not detected.) in the soils of the palygrounds were lower than the worrisome level in criteria for area 1 in Korea soil environment conservation act. In addition, when the soil pollution grade (SPC) was evaluated as an average value, it was found to be less than 100, the first grade, at all points in the seven autonomous districts, indicating thatthe soil was in good soil condition. However, when evaluated as the maximum value, some of the five districts showed values of 100 or more. Therefore, it was found that continuous management and interest of the local government, which is the management body of children's playgrounds, is necessary for a safe soil environment.

• Particle and aerosol research
• /
• v.19 no.4
• /
• pp.111-128
• /
• 2023

Chungcheongnam-do has various emission sources, including large-scale facilities such as power plants, steel and petrochemical industry complexes, which can lead to the severe PM pollution. Here, we measured concentrations of PM₁₀, PM_2.5, and its metallic elements at a suburban site in Taean, Chungcheongnam-do from September 2017 to June 2022. During the measurement period, the average concentrations of PM₁₀ and PM_2.5 were 58.6 ㎍/m³ (9.6~379.0 ㎍/m³) and 35.0 ㎍/m³ (6.1~132.2 ㎍/m³), respectively. The concentration of PM₁₀ and PM_2.5 showed typical seasonal variation, with higher concentration in winter and lower concentration in summer. When high concentrations of PM_2.5 occurred, particulary in winter, the fraction of Zn and Pb components considerably increased, indicating a significant contribution of Zn and Pb to high-PM_2.5 concentration. In addition, Zn and Pb exhibited the highest correlation coefficient among all other metallic elements of PM_2.5. A backward trajectory cluster analysis and CPF model were performed to examine the origin of PM_2.5. The high concentration of PM_2.5 was primarily influenced by emissions from industrial complexes located in the northeast and northwest areas.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.243-250
• /
• 2020

The purpose of this study is to find out the possibility of applying microwave-hypochlorous acid leaching to effectively leaching Au in hydrothermal minerals on board. The comparative leaching experiment were confirmed that the leaching rate of Au with(T1)/with out(T2) of microwave nitric acid leaching. In addition, the leaching rate of Au on the conventional leaching by mechanical agitation(T3) and microwave leaching was compared. The result of microwave nitric acid leaching(solid-liquid ratio; 10%, leaching temperature; 90 ℃, leaching time; 20 min) confined that the metal leaching rate was high in the order of As>Pb>Cu>Fe>Zn, and the content of Au in the leaching residue was increased from 33.77 g/ton to 60.02 g/ton. As a result of the comparative leaching experiment using a chloride solvent, the dissolution rate of Au was high in the order of T1(61.10%)>T3(53.30%)>T2(17.30%). Therefore, chloride, which can be manufactured using seawater and that can be recycled by collecting chlorine gas generated in the leaching process, is expected to be an optimal solvent for Au leaching. In addition, the application of microwaves is believed to be effective in terms of time, efficiency and energy.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.51-57
• /
• 2008

In this paper, wetting and interfacial reaction properties for low Ag containing Sn-Ag-Cu Pb-free solder alloy, i.e., Sn-0.3Ag-0.7Cu were investigated and compared with those of Sn-1.0Ag-0.5Cu and Sn-3.0Ag-0.5Cu. Melting behavior and stress-strain curves of some Sn-xAg-xCu alloys were also measured using a differential scanning calorimeter(DSC) and a tensile test machine, respectively. In order to enhance insufficient wetting properties of Sn-0.3Ag-0.7Cu alloy, the improvement of wetting properties were analyzed by applying fluxes containing higher content of halide or indium adding of 0.2wt.% into the solder alloy. It was concluded that the small addition of indium is more effective for the improvement of wettability in low temperature range of $230{\sim}240^{\circ}C$ than applying flux containing higher content of halide.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.132-139
• /
• 2005

Sintering behavior of $BaO-Nd_{2}O_3-TiO_2$ with a Pb-based glassceramics frit were investigated in order to understand an effect of glassceramics as a low temperature sintering agent on dielectric ceramics. A green sheet form was fabricated through tape casting method with the glassceramic fut added $BaO-Nd_{2}O_3-TiO_2$. The dispersion properties, rheological properties and final density of dielectric composit slurry as a function of amount and composition of organic additives was examined. The dispersants' addition was effective in controlling dispersion of the ceramics in solution. The addition of excessive dispersant showed adverse effect on dispersion. The prepared slurries, containing ceramic : powders, glass-ceramics and various kinds of organic viechles, exhibited typical shear thinning behavior. The best properties of tape casting appeared powder to solvent ratio 65 : 35 and amount of the binder 6 wt$\%$ and plasticizer 3 wt$\%$. The viscosity of the slurry was 677 cps and green/sintered density in the tape was $3.3 g/cm^3,\;5.56 g/cm^3$ respectively.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.221-226
• /
• 1998

Ternary heavy metal oxide glasses in the $PbO-Bi_2O_3-Ga_2O_3$ system doped with $Er_2O_3$ were prepared and their spectroscopic properties, such as radiative transition probability, calculated and measured radiative lifetimes and cross-sections of 1.5 $\mu\textrm{m}$ and 2.7 $\mu\textrm{m}$ emissions were analyzed. Enhanced quantum efficiencies of some electronic transitions were evident mainly because of the low vibrational phonon energy ($~500cm^{-1}$) inherent in the host glasses. This seems to be the main reason for obtaining the 2.7 $\mu\textrm{m}$ luminescence which is normally quenched in the conventional oxide glasses. In addition, green and red fluorescence emissions were observed through the frequency upconversion processes of the 798 nm excitation. Non-radiative transition due to the multiphonon relaxation is a dominant lifetime-shortening mechanism in the 4f-4f transitions in $Er^{3+}$ ion except for the $^4S_{3/2}{\rightarrow}^4I_{15/2}$ transition where a non-radiative transfer to band-gap excitation of the host glasses is dominant. Melting of glasses under an inert gas atmosphere and (or) addition of the typical glass-network former into glasses is necessary in order to enhance the quantum efficiency of the transition.