• 센서학회지
• /
• 제17권6호
• /
• pp.418-424
• /
• 2008

The PZT based piezoelectric thick films prepared by screen printing method have been mainly used as a functional material for MEMS applications due to their compatibility of MEMS process. However the screen printed thick films generally reveal poor electrical and mechanical properties because of their porous microstructure. To improve microstructure we mixed attrition milled powder with ball milled powder of 0.01Pb$(Mg_{1/2}W_{1/2})O_3$-0.41Pb$(Ni_{1/3}Nb_{2/3})O_3$-$0.35PbTiO_3$-$0.23PbZrO_3$+0.1 wt% ${Y_2}{O_3}$+1.5 wt% ZnO composition. By mixing 25 % of attrition milled powder and 75 % of ball milled powder, the broadest particle size distribution was obtained, leading to a dense thick film with crack-free microstructure and improved dielectric properties. The X-ray diffraction analysis revealed that the film was in wellcrystallized perovskite phase. The remanent polarization was increased from $13.7{\mu}C/cm^2$ to $23.3{\mu}C/cm^2$ at the addition of 25 % attrition milled powder.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1260-1266
• /
• 1996

The effects of SiO2 MnO2 and sintering atmospheres (O2, N2) on the piezoelectric properties and densification behaviors of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 were investigated. The addition of SiO2 to the system enhanced the rate of densification but supressed the rate of grain growth. On the other hand the addition of MnO2 to the system did not nearly affect the rate of densification but increased slightly the rate of grain growth The densification of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 was promoted with increasing the partial pressure of O2. The relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 sintered under O2 atmosphere were higher than under N2 atmosphere. Whereas the mechanical quality factor (Qm) of specimens sintered under O2 atmosphere were lower than under N2 atmosphere. Thus the sintering atmosphere of O2 and N2 in Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 acted as donor and acceptor respectively. As the amount of SiO2 increased the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 but the mechanical quality factor (Qm) did not nearly change, In the case of the addition of MnO2 to the system the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 sintered under O2 atmosphere decreased rapidly with increasing the amount of MnO2 but they were unchanged with increasing the amount of MnO2 under N2 sintering atmosphere. Therefore the differences of the relative dielect-ric constant ($\varepsilon$r) and piezoelectric constant (d33) due to sintering atmosphere were diminished as the amount of MnO2 increased.

• 자원리싸이클링
• /
• 제30권1호
• /
• pp.66-76
• /
• 2021

전기로 제강분진 중에는 아연(Zn), 납(Pb)등과 같은 유가금속들이, 다양한 화합물(산화물 또는 염화물 등)의 형태로 다량 함유되어 있다. 전기로 제강분진 내에 함유되어 있는 이들 유용금속원소들을, 가장 효율적이며 안정적으로 회수할 수 있는 대표적인 방법으로서는 Rotary Kiln Process가 있다. Rotary Kiln Process는 전기로 제강분진에 환원제(Coke, 무연탄)와 석회석(염기도 제어용)을 첨가하여 성형한 후에 가열함으로서, 아연성분을 조산화아연(Crude Zinc Oxide : 60% Zn)의 형태로 회수하는 방법으로 오래전에 이미 상용화되었으며, 지금도 공정 및 설비의 단점을 개선하기 위한 연구개발을 지속적으로 수행하고 있다. 현재 국내에서도 전기로 제강분진을 재활용하여 조산화아연을 생산하는 다수의 상용화공장들이 가동되고 있다. 조산화아연 중에는, 아연성분 외에도 다양한 기타의 성분원소들(Pb, Cd, Sn, In, Fe, Cl, F 등)이 산화물, 염화물, 알칼리 화합물 등의 형태로 함께 혼재되어 있다. 그러므로 조산화아연을 건식 또는 습식아연제련용 원료로서 그대로 사용하게 되면 조산화아연에 함유된 이들 불순물 성분들이 미치는 악영향으로 인하여, 아연제련과정에서 많은 문제점들이 발생하므로. 따라서 이들 불순물 성분원소들을 가능하면 모두 제거하기 위한 건식 또는 습식정제공정이 추가로 필요하다. 따라서 본 연구에서는 조산화아연의 건식휘발 정제공정에서 발생되어 백필터에 포집된 아연(Zn) 및 납(Pb)을 함유한 2차분진(2nd Dust)으로부터 아연(Zn)과 납(Pb)을 효율적으로 분리하고, 더욱 부가가치를 높이기 위하여 Zn-cementation법으로 이들 성분원소들을 금속탄산염의 형태로 분리회수할 수 있는 공정기술에 대하여 기초적인 연구를 수행하였다.

• 유통과학연구
• /
• 제16권2호
• /
• pp.47-51
• /
• 2018

Purpose - Typically, retailers will want PB(Private Brand) products to expand to the needs of low-PB loyal customers as well as existing PB(Private Brand) loyal customers. Therefore, a strategy of minimizing the share of the manufacturer brand in the distributor can be considered as a way to maximize the profit of the distributor. Research design, data, and methodology - In the previous study, the researches about the rivalry and conflict between the NB(National Brand) products and the PB products were mainly made. Previous studies did not model inter-national brand-level competition and inter-store competition. In addition, they have focused only on distributors' decisions from the manufacturer's perspective, and assume channel members have the same level of members(Choi, 1996). Results - This paper tries to apply the game theory to researches on how retailers can maximize the benefits of distributing NB(National Brand) products and PB(Private Brand) products, while distributors can also take advantage of their profits. Conclusions - It was found that providing cheap PBs did not help manufacturers and distributors. Distributors and manufacturers' profits were determined by consumers who purchased NB products that were higher in price and higher in perceived quality before providing existing PB products to consumers.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.235-241
• /
• 1996

In this paper dielectric and electrostrictive strain properties of (1-y-x)Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_{3}$-PbTiO$_{3}$$-yPbTiO_{3}-xSrTiO_{3}[(1-y-x)PMN-yPT-xST]$ ceramics fabricated by using columbite precursor method have been investigated with the substitution of SrTiO$_{3}$(ST). Dielectric constant of the specimens increased with the increase of ST content up to 5[m/o] and decreased with further substitution of ST. And the pyrochlore phase decreased with the increase of ST content up to 5[m/o] in XRD analysis. The elimination of the pyrochlore phase improved dielectric constants. The electrostrictive strains generated by AC electric field have the highest value at 5[m/o] SrTiO$_{3}$ addition and the hysteresis of strain ranged from 12 to 20[%]. The electrostrictive strain at various temperature investigated in the temperature range of $-50[^{\circ}C]~74[^{\circ}C].$ In higher temperature than phase transition region, it showed paraelectric property which shows very small hystersis.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.351-359
• /
• 2016

The Korean Prototype Gen-IV sodium-cooled fast reactor (PGSFR) is supposed to be loaded with a relatively-costly low-enriched U fuel, while its envisaged transuranic fuels are not available for transmutation. In this work, the U-enrichment reduction by improving the neutron economy is pursued to save the fuel cost. To improve the neutron economy of the core, a new reflector material, PbO, has been introduced to replace the conventional HT9 reflector in the current PGSFR core. Two types of PbO reflectors are considered: one is the conventional pin-type and the other one is an inverted configuration. The inverted PbO reflector design is intended to maximize the PbO volume fraction in the reflector assembly. In addition, the core radial configuration is also modified to maximize the performance of the PbO reflector. For the baseline PGSFR core with several reflector options, the U enrichment requirement has been analyzed and the fuel depletion analysis is performed to derive the equilibrium cycle parameters. The linear reactivity model is used to determine the equilibrium cycle performances of the core. Impacts of the new PbO reflectors are characterized in terms of the cycle length, neutron leakage, radial power distribution, and operational fuel cost.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.39-45
• /
• 2010

In order to treat paddy soils contaminated by Pb, Cd, and As near the abandoned mine, $H_2PO_4$ was used for stabilization of Pb ($PO_4$/Pb mole ratio of 2/1). In addition, $CaCO_3$ and $FeSO_4$ were used as stabilizers for treating Cd and As (2% w/w), respectively. Leaching tests were conducted with artificial rain in the column to assess the heavy metal stabilization efficiency. The mass of heavy metals in the effluents passed through the columns were analyzed. The remaining heavy metals in the soils were also analyzed as Korean soil standard method, phytoavailability test and sequential extraction test. Lead in the effluent was not detected when $H_2PO_4$ was used as a stabilizer. This result suggests that $H_2PO_4$ is efficient for Pb stabilization. In addition results of sequential extraction scheme suggest that heavy metals are present as residual forms which is not easily extracted.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.551-559
• /
• 2013

To investigate the adhesion effect of sodium bisulfite content in making blocked isocyanate, wood adhesive PB-1, PB-2, PB-3 and PB-4 containing sodium bisulfite content of 15%, 22.5%, 30% and 37.5% were synthesized respectively. As a result, when the amount of sodium bisulfite increased in adhesives, the tensile strength was found to be proportionally increased. The final adhesive mixtures were manufactured using a two-components system which are prepared by mixing two separate protein and BI solutions due to the precipitate in the adhesives. As PVA was added to adhesives to increase tenacity, the plywood dehiscence phenomenon after cold pressing process was declined. By addition of PVA, the tensile strength was improved up to $6.5{\sim}7kgf/cm^2$ with BI/protein ratio from 1:6 up to 1:8. Phase separation between milk fat and aqueous layer was disappeared after addition of emulsifier, Tween 20. Additon of Tween 20 showed tensile strength up to $5{\sim}6.5 kgf/cm^2$ at NCO/protein ratio of 1:12 ~ 1:14 without phase separation.

• 마이크로전자및패키징학회지
• /
• 제8권2호
• /
• pp.9-13
• /
• 2001

$(Ba_{0.5}Pb_{0.5})Nd_2Ti_5O_{14}$(마이크로파 유전체 세라믹스에 borosilicate계 유리를 첨가하여 저온소결 특성과 마이크로파 특성을 조사하였다. Borosilicate계 유리가 2~3 wt% 첨가된 경우 $950^{\circ}C$의 소결 온도에서 소결성이 향상됨과 동시에 품질계수도 놀아지는 것을 확인할 수 있었다. BPNT에 3 wt%의 유리를 첨가함으로써 $950^{\circ}C$에서 유전율은 90에서 75 정도로 약간의 감소를 보였으나 마이크로파 품질계수 (Q$\times$f)는 4500 정도로 잘 유지되었고 공진주파수의 온도계수도 +10 $ppm/^{\circ}C$로서 잘 유지되는 결과를 나타내었다.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.938-944
• /
• 1995

Dielectric properties and the stabilization of perovskite phase for the (1-y)Pb(Mg(1-x)/3Znx/3Znx/3Nb2/3)O3-yBaTiO3 ((1-y)PM1-xZxN-yBT) ceramics have been investigated as a function of amount of x and y. In the (1-y)PM0.6Z0.4N-yBT ceramics, the amount of pyrochlore phae was decreased by the addition of 2 mol% BT and the dielectric constant was increased. However, the dielectric constant decreased with further addition of BT even though pyrochlore phase was decreased. Dielectric prooperties in (1-y)PM0.6Z0.4N-yBT ceracmis were affected by the character of the BT rather than the amount of pyrochlore phase. The phase transitions were broadened and phase transition temperatures were lowered by the increase of BT contents.