• Atmosphere
• /
• v.23 no.4
• /
• pp.413-424
• /
• 2013

Urban Heat Island (UHI) intensity is one of vital parameters in studying urban boundary layer meteorology as well as urban planning. Because the UHI intensity is defined as air temperature difference between urban and rural sites, an objective sites selection criterion is necessary for proper quantification of the spatial variations of the UHI intensity. This study quantified the UHI intensity and its spatial pattern, and then analyzed their connections with urban structure and metabolism in Seoul metropolitan area where many kinds of land use and land cover types coexist. In this study, screen-level temperature data in non-precipitation day conditions observed from 29 automatic weather stations (AWS) in Seoul were analyzed to delineate the characteristics of UHI. For quality control of the data, gap test, limit test, and step test based on guideline of World Meteorological Organization were conducted. After classifying all stations by their own local climatological properties, UHI intensity and diurnal temperature range (DTR) are calculated, and then their seasonal patterns are discussed. Maximum UHI intensity was $4.3^{\circ}C$ in autumn and minimum was $3.6^{\circ}C$ in spring. Maximum DTR appeared in autumn as $3.8^{\circ}C$, but minimum was $2.3^{\circ}C$ in summer. UHI intensity and DTR showed large variations with different local climate zones. Despite limited information on accuracy and exposure errors of the automatic weather stations, the observed data from AWS network represented theoretical UHI intensities with difference local climate zone in Seoul.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.10
• /
• pp.72-82
• /
• 1999

The error diffusion algorithm is excellent for reproducing continuous gray-scale images to bianry images and also has good edge characteristics. However, it is well known that artifacts with objectionable patterns can occur in the halftoned images. On the other hand, a halftone algorithm using blue noise mask has been proposed. where the halftoning is achieved by a pixelwise comparison of gray-scale image with an array, the blue noise mask. It doesn't have pattern artifacts, but the halftoned image looks unclear because the quantization errors are not feedbacked compared to the error diffusion. In this paper, edge enhanced error diffusion which dithers the threshold with the blue noise mask is proposed. We show that the proposed algorithm can produce unstructured and edge enhanced halftone images. This algorithm is analyzed by the concept of an equivalent input image. The performace of the proposed algorithm is compared with that of the conventional halftoning by measuring the radially averaged power spectrum and edge correlation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.377-382
• /
• 2014

Analysis techniques of the data over time from the mobile environment and IoT, is mainly used for extracting patterns from the collected data, to find meaningful information. However, analytical methods existing, is based to be analyzed in a state where the data collection is complete, to reflect changes in time series data associated with the passage of time is difficult. In this paper, we introduce a method for analyzing multi-block streaming data(AM-MBSD: Analysis Method for Multi-Block Stream Data) for the analysis of the data stream with multiple properties, such as variability of pattern and large capacitive and continuity of data. The multi-block streaming data, define a plurality of blocks of data to be continuously generated, each block, by using the analysis method of the proposed method of analysis to extract meaningful patterns. The patterns that are extracted, generation time, frequency, were collected and consideration of such errors. Through analysis experiments using time series data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.633-642
• /
• 2004

This study tries to generalize the stream network by constructing rule-based modelling. A study on the map generalization tends to be concentrated on development of algorithms for modification of linear features and evaluations to the limited cartographic elements. Rule-based modelling can help to improve previous algorithms by application of generalization process with the results that analyzing mapping principles and spatial distribution patterns of geographical phenomena. Rule-based modelling can be applied to generalize various cartographic elements, and make an effective on multi-scaling mapping in the digital environments. In this research, nile-based modelling for stream network is composed of generalization rule, algorithm for centerline extraction and linear features. Before generalization, drainage pattern was analyzed by the connectivity with lake to minimize logical errors. As a result, 17 streams with centerline are extracted from 108 double-lined streams. Total length of stream networks is reduced as 17% in 1:25,000 scale, and as 29% in 1:50,000. Simoo algorithm, which is developed to generalize linear features, is compared to Douglas-Peucker(D-P) algorithm. D-P made linear features rough due to the increase of data point distance and widening of external angle. But in Simoo, linear features are smoothed with the decrease of scale.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.937-950
• /
• 2015

Microstrip reflectarray is an antenna which controls its radiation pattern with a number of reflective elements. Conventionally, the reflectarray has been researched to replace curved reflector antennas. In this paper, design theories of reflectarray is briefly introduced, and research trends of high gain and broadband reflectarrays are reviewed. To improve the gain of the reflectarrays, it is required that the reflection phase errors on the reflectarray surface be minimized. For this purpose, sufficiently wide reflection phase range and low phase sensitivity should be realized with the designed element. For bandwidth improvement, the reflection phase of the element should be linear with the frequency variation. In this paper, various researches to improve the reflection phase characteristics of the element for high gain and broadband reflectarrays, such as multi-layer and single-layer multi-resonant structures, are reviewed. Also, dual-reflectarray configuration for compact antenna design is reviewed. Finally, various applications of reflectarrays such as contoured beam, near-field focusing, and RCS reduction are reviewed.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.31-40
• /
• 2006

In this paper, we propose a gait recognition method based on gait silhouette sequences. Features of gait are affected by the variation of gait direction. Therefore, we synthesize silhouettes to canonical form by using planar homography in order to reduce the effect of the variation of gait direction. The planar homography is estimated with only the information which exist within the gait sequences without complicate operations such as camera calibration. Even though gait silhouettes are generated from an individual person, fragments beyond common characteristics exist because of errors caused by inaccuracy of background subtraction algorithm. In this paper, we use the Principal Component Analysis to analyze the deviated characteristics of each individual person. PCA used in this paper, however, is not same as the traditional strategy used in pattern classification. We use PCA as a criterion to analyze the amount of deviation from common characteristic. Experimental results show that the proposed method is robust to the variation of gait direction and improves separability of test-data groups.

• Korean Journal of Remote Sensing
• /
• v.34 no.1
• /
• pp.101-115
• /
• 2018

The Long Valley area and its surroundings are part of a major volcano system where inflation occurred in the resurgent dome in the 1990s. We used ENVISAT data to monitor surface deformation of the Long Valley area and its surroundings after the inflation, from 2003-2010. To retrieve the time series of the deformation, we applied the refined Small BAseline Subset (SBAS) algorithm which is improved using an iterative approach to minimize unwrapping error. Moreover, ascending and descending data were used to decompose the horizontal and vertical deformation in detail. To confirm refined SBAS results, we used GPS dataset. The InSAR errors are estimated as ${\pm}1.0mm/yr$ and ${\pm}0.8mm/yr$ from ascending and descending tracks, respectively. Compare to the previous study of 1990s over the Long Valley and its surroundings, Paoha Island and CASA geothermal area still subside. The deformation pattern in the Long Valley area during the study period (2003-2010) went through both subsidence (2003-2007) and slow uplift(2007-2010) episodes. Our research also shows no deformation signal near McGee Creek. Our study provided a better understanding of the surface changes of the indicators in the 1990s and 2000s.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.671-680
• /
• 2015

The Joint Bayesian[1] method was published in 2012. Since then, it has been used for binary classification in almost all state-of-the-art face recognition methods. However, no improved methods have been published so far except 2D-JB[2]. In this paper we propose an improved version of the JB method that considers the features of both the given face image and its mirror image. In pattern classification, it is very likely to make a mistake when the value of the decision function is close to the decision boundary or the threshold. By making the value of the decision function far from the decision boundary, the proposed method reduces the errors. The experimental results show that the proposed method outperforms the JB and 2D-JB methods by more than 1% in the challenging LFW DB. Many state-of-the-art methods required tons of training data to improve 1% in the LFW DB, but the proposed method can make it in an easy way.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.53-59
• /
• 2021

When using Medical Information Retrieval services, a typical retrieval method is to use the Anatomic Therapyutic Chemical Classification (ATC) code. Traditional ATC code-based medical information retrieval is very useful for single ingredient product retrieval with single ingredient. However, in the case of complex, retrieval errors often occur. The cause of this problem is that ATC code-based retrieval proceeds by pattern matching ATC code.In this work, we design the mapping scheme based on ATC code by analyzing the requirement scenarios for retrieval based on main ingredient in ATC code-based retrieval. the mapping scheme based on ATC is a schema that stores the ATC code of the complex and all the ATC code of the single agent included in the complex. ATC code-based retrieval using this schema retrieves a complex as ingredient of a single ingredient product, thus having higher accuracy than existing methods. the mapping scheme based on ATC is expected to increase the efficiency of doctors' prescription of patients and increase the accuracy of drug safety use services.