• Journal of Korea Foundry Society
• /
• v.12 no.1
• /
• pp.40-50
• /
• 1992

A computer simulation of mold filling has been performed in order to analyze the fluid flow pattern in a mold cavity since casting defects such as cold shut formation, entrapment of air or gas, and inclusions are closely related to the fluid flow phenomena. The flow of molten metal entering the mold cavity with free surface has been modeled by SMAC(Simplified Marker and Cell) method. Two dimensional analysis was carried out on plate shape castings with two types of gate system. The calculation results were compared with those of water modeling experiments and showed relatively good agreement.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.9
• /
• pp.39-47
• /
• 2013

Local deformations in back filling materials of two sands and one glass bead with different particle shapes behind a rigid retaining wall were studied. Two kinds of boundary conditions were compared: active wall translation and active rotation of the wall about its toe. Effect of the speed of active wall translation was also investigated. The digital image correlation method was used to analyze local deformation developments inside the materials. Test results showed that particle shape and density mainly influence the inclination angle and width of the shear band. The general shear band pattern is strongly dependent on the wall movement mode, while it was little influenced by particle shape. Within a limited range of wall speed in this study, shear band became wider and local deformation became larger with increase of wall speed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.497-498
• /
• 2006

Powder Injection Molding (PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry. With this regards, design technology of dental scaler tip PIM mold, which has complex shape, with the help of computer-aided analysis for powder injection molding process was developed. Compter aided analysis results, such as filling pattern, weldline formation, and air vent position prediction were investigated and eventually showed good agreements with experimental results.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1016-1022
• /
• 2014

Kinect is a motion sensing camera released by Microsoft in November 2010 for the Xbox360 that is used to produce depth and color images. Because Kinect uses an infrared pattern, it generates holes and noises around an object's boundaries in the obtained images. The flickering phenomenon and unmatched edges also occur. In this paper, we propose a real time virtual-view video synthesis algorithm which results in a high quality virtual view by solving these problems stated above. The experimental results show that the proposed algorithm performs much better than the conventional algorithms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.14-15
• /
• 2006

Application of the parallel Build-up is increasing continuously. This report presents about the PCB Build-up technology since 2000. Among the parallel build-up technologies, PALAP application - after making the via, filling the via with electric conductive paste, then expose to make wiring pattern and put them by layer without any glue or middle - is actively developing, especially DENSO company.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.06a
• /
• pp.177-177
• /
• 2020

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.384-388
• /
• 2014

Air temperature has increased, while sunshine hour has decreased during the grain filling period of most rice cultivars (August to September) during the past 12 years from 2001 through 2012 in Korea. Climatic Productivity Index (CPI) has fallen because of the decreased sunshine hour and increased air temperature during the grain filling period, and the degree of reduction was greater with earlier heading. For stable rice production, we will need to delay the heading of rice as a cultivation measure against the future climatic trend. Grain yield showed no significant trend for past 12 years. However, the year to year change in grain yield showed a similliar pattern with that of CPI. Especially, a linear function relating rice yield to CPI explained approximately 63% of variation in grain yield with the heading date of August $11^{th}$ period.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.165-165
• /
• 2009

현재 반도체나 이동통신 분야는 사용자의 요구에 따라 PCB의 회로선폭이 갈수록 좁아지고 있다. 이러한 정밀 부품을 제조하기 위한 제조공정에서 각광받기 시작한 기술 중 하나가 대기압 플라즈마 기술이다. 본 연구에서는 미세패턴 형성이 가능한 에폭시 본딩 필름위에 무전해 도금공정을 통한 패턴 도금법을 이용하여 패턴을 형성하였고, 형성된 패턴에 대기압 플라즈마 처리 횟수에 따른 접촉각(Contact Angle)과 Peel Strength의 변화를 분석하였다. 또한 에폭시 본딩 필름을 이용한 Build-up공정을 거쳐 Micro Via를 형성하여 대기압 플라즈마 처리 횟수에 따른 Via 표면을 분석하였다. 대기압 플라즈마 기술은 진공식에 비해 소규모 장비를 이용한 전처리가 가능하고, 초기 설비비용을 절감하는데 탁월한 효과가 있어 널리 사용하는 기술 중 하나이다. 이 연구를 통하여 대기압 플라즈마 처리 횟수에 따른 표면에너지의 변화로 인한 접촉각이 좋아지는 것을 알 수 있으며, 대기압 플라즈마 처리를 한 패턴표면이 친수성으로 변하면서 현상된 드라이 필름 사이로 도금액이 원활히 공급되어서 미세패턴 모양이 우수하게 구현되었음을 알 수 있었다. 또한 Via Filling에도 뛰어난 효과가 있었음을 확인할 수 있었다.

• Journal of Korea Foundry Society
• /
• v.17 no.5
• /
• pp.465-471
• /
• 1997

An integrated computer program consisting of a pre-processor, main solver, and post-processor was developed for the design of large steel castings. The pre-processor, based on the AutoCAD, enables the user to produce approval drawings, casting design drawings and mesh diagrams in sequence using a personal computer. In the main solver, two numerical models were employed; one models the fluid flow during mold filling, and the other models the heat transfer and solidification. The post-processor can be used to present simulation results such as flow pattern, mold filling sequences, solidification times, temperature gradients and location of shrinkage defects by color graphics. In order to validate the applicability of the present integrated program, a series of experiments on simple-shaped steel castings were carried out. After the validation of the present model, it was applied to the casting design of the large steel anchor of an SC42 alloy. Various solidification parameters such as a temperature distribution and a solidification time in the casting and the mold were compared with those obtained experimentally. Simulated results predicting shrinkage defects were in good agreement with those obtained experimentally. It was found that the present method can be successfully applied to the quantitative casting design for complex-shaped large steel castings.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.111-114
• /
• 2005

Experimental and numerical studies were carried out in order to investigate the processability and the transcriptability of the injection molding of micro structures. For this purpose, we designed a mold insert having micro rib patterns on a relatively thick base part. Mold insert has a base of 2mm thickness, and has nine micro ribs on that base plate. Width and height of the rib are $300{\mu}m\;and\;1200{\mu}m$, respectively. We found a phenomenon similar to 'race tracking', due to 'hesitation' in the micro ribs. As the melt flows, it starts to cool down and melt front located in the ribs near the gate cannot penetrate further because the flow resistance is large in that almost frozen portion. When the base is totally filled, the melt front away from the gate is not frozen yet. Therefore, it flows back to the gate direction through the ribs. Consequently, transcriptability of the rib far from the gate is better. We also verified this phenomenon via numerical simulation. We further investigated the effects of processing conditions, such as flow rate, packing time, packing pressure, wall temperature and melt temperature, on the transcriptability. The most dominant factor that affects the flow pattern and the transcriptability of the micro rib is flow rate. High flow rate and high melt temperature enhance the transcriptability of micro rib structure. High packing time and high packing pressure result in insignificant dimensional variations of the rib. Numerical simulation also confirms that low flow rate causes a short shot of micro ribs and high wall temperature helps the filling of the micro ribs.