• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• New & Renewable Energy
• /
• v.17 no.3
• /
• pp.1-7
• /
• 2021

The Korean government announced various energy policies, such as the to reduce 37% of the business-as-usual (BAU) greenhouse gas emissions by 2030. The policies aim to increase the renewable electricity generation ratio to 20% by 2030. PVT is a hybrid technology, which combines photovoltaic (PV) and solar collectors. It is capable of generating electricity and thermal energy simultaneously. It has a great potential to be used as a renewable and clean solar energy. However, there exists a shortage of space for the installation of PVT systems in Korea. To overcome this, in this paper proposes four types of soundproof wall PVT air channels, which were designed and optimized, based on the CFD (Computation Fluid Dynamic) analysis results. The thermal energy generation for multiple PVT units connected in series and pressure drop sensitivity were analyzed, depending on inlet velocity.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.62-69
• /
• 1996

In this study, an equivalent domain integral (EDI) method is presented to estimate the track-till integral parameter, J-value, for two dimensional cracked elastic bodies which may quantify the severity of the crack-tit) stress fields. The conventional J-integral method based on line integral has been converted to equivalent area or domain integrals by using the divergence theorem. It is noted that the EDI method is very attractive because all the quantities necessary for computation of the domain integrals are readily available in a finite element analysis. The details and its implementation are extened to both h-version finite element model with 8-node isoparametric element and p-version finite element model with high order hierarchic element using Legendre type shape fuctions. The variations with respect to the different path of domain integrals from the crack-tip front and the choice of 5-function have been tested by several examples.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.23-26
• /
• 2015

A seam carving based micro-crack detection method is proposed which aims at detecting the micro-crack regions in heterogeneously textured surface of polycrystalline solar cells. By calculating the seam which is a connected path of low energy pixels in the image, the micro-crack regions can be detected. Experimental results show that the proposed seam carving based micro-crack detection method has superior efficiency in detecting the micro-crack without background noise pixels and the algorithm's computation time is less than the conventional algorithm.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.34-48
• /
• 2017

This study proposes a new approach to control a trajectory control of vertical type articulated robot arm with six revolution joints by computed torque method for manufacturing process automation. The proposed control scheme takes advantage of the properties of the fuzzy controllers. The proposed method is suitable to control of the trajectory and path control in cartesian space for vertical type articulated robot manipulator for forging manufacturing process automation. The results is illustrated that the proposed fuzzy computed torque controller is more stable and robust than the conventional computed torque controller. This study is included with an analytical methodology of inverse kinematic computation for 6 DOF manipulators. And an intelligent PID based on feed forward fuzzy control structure is applied to control the working path control with disturbances caused by uncertainty parameters of the manipulator dynamic model. Lastly, the validity of proposed is verified by simulations and experiments.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.97-103
• /
• 2012

A very low complexity QRD-M algorithm based on limited search area is proposed for MIMO systems. The conventional QRD-M algorithm calculates Euclidean distance between all constellation symbols and the temporary detection symbol at each layer. We found that performance will not be degraded even if we adaptively restrict the search area of the candidate symbols only to the neighboring points of temporary detection symbol according to the channel condition at each layer. As a channel condition indicator, we employ the channel gain ratio among the layers without necessity of SNR estimation. The simulation results show that the proposed scheme effectively achieves near optimal performance while maintaining the overall average computation complexity much smaller than the conventional QRD-M algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.5
• /
• pp.492-506
• /
• 2009

Index structures that are based on sequence matching for XPath processing such as ViST, PRIX and LCS-TRIM have recently been proposed to reduce the search time of XML documents. However, ViST can cause a lot of unnecessary computation and I/O when processing structural joint queries because its numbering scheme is not optimized. PRIX and LCS-TRIM require much processing time for matching XML data trees and queries. In this paper, we propose a novel index structure that solves the problems of ViST and improves the performance of PRIX and LCS-TRIM. Our index structure provides the minimum sequence matching scheme to efficiently process structural queries. Finally, to verify the superiority of the proposed index structure with the minimum sequence matching scheme, we compare our index structure with ViST, PRIX and LCS-TRIM in terms of query processing of a single path or of a branching path including wild-cards ('*' and '//' ).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.199-207
• /
• 2001

In this paper, the technique of prediction and analysis on the characteristics of propagation in indoor environment is presented. This technique needs no reception sphere commonly used in 3D-ray tracing scheme, and thereby it lends us easy code realization. The validity of developed code is verified by comparing with the values of image methods and measurement. The developed technique applied to the structure of rectangular corridor with the iron door and we calculated the path loss for the variation of the iron door angle. The path loss decreased about 15 dB at the distance of30 m from the iron door and the delay spread increased approximately by four times. Based on the computation, we confirmed that indoor propagation in PCS is heavily affected by the iron door in corridor.

• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.645-652
• /
• 1996

The ionic conductivity of NASICON (Na Super Ionic Conductor) solid electrolyte was simulated by using Monte Carlo Method (MCM)based on a hopping model. We assumed that the conduction path of Na ions is Na1→mid-Na→Na2 where the mid-Na sites are shallow potential sites to induce 'a breathing-like movement' of Na ions in the NASICON framework. The minimum of charge correlation factor Fc and the maximum of appeared at nearby x=2.0 The occupancy of mid-Na site affected the depth of potential barrier and the conduc-tivity of the NASICON. At above x=0.3 ln σT vs. 1/T* plots have been shown Arrhenius behavior but in (VWfc)vs. 1/T* have been shown the Arrhenius type tendency at x=1 MCM results accorded with the experi-mental procedure. The role of mid-Na on Na+ ion conduction could be explained by an additional driving force and a breating-like movement model for motions of Na+ ions in the NASICON framework. As we couldn't clearly remarked the model which is the better it seems reasonable to conclude that these hypothesies are suitable to explain the FIC behavior at NASICON.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.601-614
• /
• 2012

Since the optimized use of sonar systems available for detection is a very practical problem for a given ocean environment, the measure of mission achievability is needed for operating the sonar system efficiently. In this paper, a theory on Measure Of Effectiveness(MOE) for specific mission such as detection is described as the measure of mission achievability, and a recursive Cumulative Detection Probability(CDP) algorithm is found to be most efficient from comparing three CDP algorithms for discrete glimpses search to reduce computation time and memory for complicated scenarios. The three CDPs which are MOE for sonar-maneuver pattern are calculated as time evolves for comparison, based on three different formula depending on the assumptions as follows; dependent or independent glimpses, unimodal or non-unimodal distribution of Probability of Detection(PD) as a function of observation time interval for detection. The proposed CDP algorithm which is made from unimodal formula is verified and applied to OASPP(Optimal Acoustic Search Path Planning) with complicated scenarios.