• 제목/요약/키워드: Path duration

검색결과 134건 처리시간 0.025초

JTC 채널 모델에서 W-CDMA의 대역폭에 따른 성능 분석 (Analysis of W-CDMA systems with different bandwidths over JTC channel model)

  • 이주석;오동진;김철성
    • 한국통신학회논문지
    • /
    • 제26권11B호
    • /
    • pp.1546-1555
    • /
    • 2001
  • 일반적으로 CDMA 시스템의 해석에서 시스템의 대역폭에 관계없이 한 칩 구간 내에 일정한 평균 전력을 갖는 한 개의 다중 경로 성분만을 고려하고 있다. 그러나 본 논문에서는 고정된 채널 모델에서 시스템의 대역폭에 따라 한 칩 구간 내의 다중 경로 성분들의 수를 달리하고, 이 다중경로 성분들에 자기 상관 함수의 기울기와 상대적인 위상을 고려하여 페이딩의 영향을 해석하였다. 이러한 페이딩이 시스템에 미치는 영향을 알아보기 위해 출력 신호의 통계적 분포를 나타내는 출력 신호의 확률 밀도 함수를 구하였다, 그리고 이 출력 신호에 대한 조건부 에러 확률을 이용하여 사용자 수에 대한 평균 에러 확률을 유도하였다. 광대역 다중 경로 채널 모델로 실측 채널 모델인 JTC 채널 모델을 사용하고, 시스템의 성능 개선을 위해 MRC 레이크 수신기를 사용하였다. 그리고 W-CDMA 시스템의 대역폭에 따른 성능을 공정하게 비교하기 위해 사용자 수를 성능비교의 파라미터로 설정하고 동일한 주파수 대역폭 내에서 hybrid FDMA/CDMA 시스템을 가정하여 비교하였다. 모의 실험의 결과로부터 이용 가능한 많은 다중 경로 성분이 존재할 때 고정된 채널 모델에서 시스템의 분해능이 좋을수록 성능이 우수함을 알 수 있었다.

  • PDF

하향링크 광대역 CDMA 이동통신 시스템을 위한 새로운 채널추정 방법 (A Novel Channel Estimation Method for Downlink Wideband CDMA Mobile Communication Systems)

  • 임민중
    • 대한전자공학회논문지TC
    • /
    • 제40권4호
    • /
    • pp.1-9
    • /
    • 2003
  • CDMA 시스템에서는 일반적으로 파일럿채널이 존재하며 이를 이용하여 채널추정을 한다. 그러나 CDMA 시스템이 고속전송을 위해 광대역을 사용하면서 한 칩(chip)의 크기가 작아지게 되었고 이에 따라 다경로 분해능력이 커지게 됨에 따라 수신 다이버시티 경로수가 증가하게 되었다. 수신 경로수의 증가에 따라, 주어진 전체 신호대잡음비에서, 이전보다 각 경로의 수신전력은 미약해지고 파일럿만으로는 정확한 채널추정이 힘들어졌다. 파일럿의 에너지가 충분치 않을 경우, 보다 정확한 채널추정을 위해서 파일럿뿐만 아니라 데이터를 사용하는, 결정지향 채널추정방법을 사용할 수 있으나 결정지향 채널추정방법에서는 결정오류의 발생으로 인해 시스템의 성능을 보장하지 못한다. 이 논문에서는 CDMA 시스템을 위해서, 파일럿채널과 함께 데이터채널을 같이 이용하여 채널추정을 할 때의 최적의 채널추정방법을 제안한다. 제안된 방법은 신호대잡음비와 심벌오류확률을 이용하여 파일럿채널과 데이터채널의 채널추정값을 최적의 비로 결합하여 사용한다. 실험결과에서, 제안된 방법은 파일럿채널만으로 충분한 성능을 얻지 못하는 경우에도 잘 동작한다는 것을 보였다.

Effect of motion path of downburst on wind-induced conductor swing in transmission line

  • Lou, Wenjuan;Wang, Jiawei;Chen, Yong;Lv, Zhongbin;Lu, Ming
    • Wind and Structures
    • /
    • 제23권3호
    • /
    • pp.211-229
    • /
    • 2016
  • In recent years, the frequency and duration of supply interruption in electric power transmission system due to flashover increase yearly in China. Flashover is usually associated with inadequate electric clearance and often takes place in extreme weathers, such as downbursts, typhoons and hurricanes. The present study focuses on the wind-induced oscillation of conductor during the process when a downburst is passing by or across a specified transmission line. Based on a revised analytical model recently developed for stationary downburst, transient three-dimensional wind fields of moving downbursts are successfully simulated. In the simulations, the downbursts travel along various motion paths according to the certain initial locations and directions of motion assumed in advance. Then, an eight-span section, extracted from a practical 500 kV ultra-high-voltage transmission line, is chosen. After performing a non-linear transient analysis, the transient displacements of the conductors could be obtained. Also, an extensive study on suspension insulator strings' rotation angles is conducted, and the electric clearances at different strings could be compared directly. The results show that both the variation trends of the transient responses and the corresponding peak values vary seriously with the motion paths of downburst. Accordingly, the location of the specified string, which is in the most disadvantageous situation along the studied line section, is picked out. And a representative motion path is concluded for reference in the calculation of each string's oscillation for the precaution of wind-induced flashover under downburst.

도시주부의 가정관리행동유형과 가정생활만족 (Family Life Satisfaction and Home Management Behavior Patterns: For Urban housewives)

  • 조미환
    • 대한가정학회지
    • /
    • 제29권2호
    • /
    • pp.169-184
    • /
    • 1991
  • The purpose of this study is to analyze urban housewives' home management behavioral patterns focusing on the morphostatic and morphogenic in continuum, to estimate the level of their family life satisfaction and to determine the variables affecting family life satisfaction. The major findings of this study can be summarized as follows: 1. The tendency is that the wives have controlled in value orientation, and home management behavioral patterns are neutral, and they are somewhat satisfied in terms of family life satisfaction. 2. As for the causal variables, marriage duration, the number of children education, employment status of wives, and value orientation influence on home management behavioural patterns. 3. The variables which affect family life satisfaction significantly are number of children, wives' education level, family income, employment status of wives and value orientation. 4. In analyzing relation between wives' home management behavioual patterns and their family life satisfaction, those who prefer morphostatic patterns have higer level of life satisfaction. 5. From the path analysis, it was found that monthly family income, employment status of wives, wives' educationn level, and value orientation had positive effects on family life satisfaction, and home management behavioral patterns had negative effects on family life satisfaction.

  • PDF

Modeling of the filling process during resin injection/compression molding

  • Chang, Chih-Yuan
    • Advanced Composite Materials
    • /
    • 제16권3호
    • /
    • pp.207-221
    • /
    • 2007
  • The filling process of resin injection/compression molding (I/CM) can be divided into injection and compression phases. During the resin injection the mold is kept only partially closed and thus a gap is present between the reinforcements and the upper mold. The gap results in preferential flow path. After the gap is filled with the resin, the compression action initiates and forces the resin to penetrate into the fiber preform. In the present study, the resin flow in the gap is simplified by using the Stokes approximation, while Darcy's law is used to calculate the flow field in the fiber mats. Results show that most of the injected resins enter into the gap during the injection phase. The resin injection time is extremely short so the duration of the filling process is determined by the final closing action of the mold cavity. Compared with resin transfer molding (RTM), I/CM process can reduce the mold filling time or injection pressure significantly.

Epipolar Geometry of Line Cameras Moving with Constant Velocity and Attitude

  • Habib, Ayman F.;Morgan, Michel F.;Jeong, Soo;Kim, Kyung-Ok
    • ETRI Journal
    • /
    • 제27권2호
    • /
    • pp.172-180
    • /
    • 2005
  • Image resampling according to epipolar geometry is an important prerequisite for a variety of photogrammetric tasks. Established procedures for resampling frame images according to epipolar geometry are not suitable for scenes captured by line cameras. In this paper, the mathematical model describing epipolar lines in scenes captured by line cameras moving with constant velocity and attitude is established and analyzed. The choice of this trajectory is motivated by the fact that many line cameras can be assumed to follow such a flight path during the short duration of a scene capture (especially when considering space-borne imaging platforms). Experimental results from synthetic along-track and across-track stereo-scenes are presented. For these scenes, the deviations of the resulting epipolar lines from straightness, as the camera's angular field of view decreases, are quantified and presented.

  • PDF

펨토초 레이저 어블레이션을 이용한 알루미나 세라믹 기판의 정밀 마이크로 드릴링 (Precision microdrilling of alumina ceramic substrates by femtosecond laser ablation)

  • 김성훈;손익부;노영철;이종민;정성호
    • 한국레이저가공학회지
    • /
    • 제11권1호
    • /
    • pp.25-31
    • /
    • 2008
  • The characteristics of femtosecond laser ablation of $Al_2O_3$ for prescision microfabrication are studied experimentally. Specifically, the process time during femtosecond laser drilling of microholes with $sub-100{\mu}m$ diameter are investigated for varying laser fluence, scan speed and beam path designs like trepanning with continuously changed start points. The accumulation of sub-micrometer size particles within the hole and the deterioration of edge clarity and roundness for decreasing hole diameter are examined and through process optimization the microdrilling with good hole quality is achieved using a femtosecond laser system (repetitionrate 1 kHz, wavelength 785 nm, pulse duration 185 fs)

  • PDF

주부의 취업여부에 따른 관리체계와 가계재정복지 (Family Resource Management and Financial Well-being of Employed and Unemployed wives in Household)

  • 임정빈
    • 가정과삶의질연구
    • /
    • 제15권3호
    • /
    • pp.125-138
    • /
    • 1997
  • The major purpose of this research was to investigate the relationship of employed and unemployed wives' financial management behavior and financial well-being on the basis of the family resource management system theory. The data were obtained from 660 wives who lived in Seoul 1996. Major findings of this study were as follows: 1. Regardless of the wives' employment status marriage duration and level of wives' education negatively influenced objective financial well-being in the case of unemployed wives but one in the case of employed wives. 2. Both unemployed and employed wives locus of control over their financial situation positively influences subjective financial well-being 3. It was found that personal and managerial factors had effect on subjective financial well-being both for unemployed and employed wives. The path model designed in this research was found to be proven for unemployed but not for employed wives.

  • PDF

주부의 취업여부에 따른 주관적 재정복지 (Subjective Financial Well-Being of Employed and Unemplyed wives)

  • 고보선;임정빈
    • 가족자원경영과 정책
    • /
    • 제2권1호
    • /
    • pp.59-77
    • /
    • 1998
  • The purpose of this study was to test a causal model of subjective financial well-being. The data of this research was obtained from 660wives who lived in Seoul, 1996. Major findings of this study were at follows: 1. Both employed and unemployed wives, younger managers were more likely to have a higher cohesion and adaptability between spouses. For the unemployed wives, locus of control over managers’financial situation and perception of gap between standard and level of living were significant predictors of the personal subsystem. 2. In both groups, financial planning was positively influenced by amount of saving. But amount of saving was not significant predictor of financial implementing. Financial implementing was positively influenced by locus of control, in the unemployed wives. For the employed wives, predictors of financial implementing were family income and marriage duration. 3. For the employed wives, the effect of personal and managerial subsystem on subjective financial well-being was greater than unemployed wives. 4. It was found that personal and managerial subsystems had effect on subjective financial well-being. Thus, the path model designed in this research was found to be proven for employed and unemployed wives.

  • PDF

Even-phase ZCD codes for MAI Cancelled DS-CDMA Systems

  • Cha, Jae-sang
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1952-1955
    • /
    • 2002
  • Multiple access interference (MAI) and multi path interference(MPI) degrades the system performance in the DS-CDMA(direct-sequence code-division multiple- access)systems .0 this paper, a generalized construction method fer 2$\^$n/(n=1,2,3) phase preferred pairs(PP) with zero-correlation duration (ZCD) of (0.5N+1) chips is proposed. 2$\^$n/(n=1,2,3) phase ZCD code sets with ZCD and enlarged family sizes are generated by carrying out a chip-shift operation of the preferred pairs . The properties of the proposed codes are effective for the cancellation of MAI and MPI in DS-CDMA Systems.

  • PDF