• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.676-687
• /
• 2015

Path planning algorithms are used to allow mobile robots to avoid obstacles and find ways from a start point to a target point. The general path planning algorithm focused on constructing of collision free path. However, a high continuous path can make smooth and efficiently movements. To improve the continuity of the path, the searched waypoints are connected by the proposed polynomial interpolation. The existing polynomial interpolation methods connect two points. In this paper, point groups are created with three points. The point groups have each polynomial. Polynomials are made by matching the differential values and simple matrix calculation. Membership functions are used to distribute the weight of each polynomial at overlapped sections. As a result, the path has $G^2$ continuity. In addition, the proposed method can analyze path numerically to obtain curvature and heading angle. Moreover, it does not require complex calculation and databases to save the created path.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2732-2734
• /
• 2000

This paper proposes a path planning algorithm for mobile robots. To generate a minimum-distance path for mobile robots, we use the Genetic Algorithm(GA) and Visibility Graph. After finding a minimum-distance path between a start and a goal point, the path is revised to find the smooth subminimum-distance path by a path-smoothing algorithm. Simulation results show that the proposed algorithms are effective.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.1-7
• /
• 2012

This paper deals with the global path planning problem for AUVs (autonomous underwater vehicles) in a tidal current field. The previous researches in the field were unsuccessful at simultaneously addressing the two issues of obstacle avoidance and tidal current-based optimization. The use of a genetic algorithm is proposed in this paper to move past this limitation and solve both issues at once. Simulation results showed that the genetic algorithm could be applied to generate an optimal path in the field of a tidal current with multiple obstacles.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.105-110
• /
• 2009

In this paper, we proposed a navigation algorithm of the mobile robot for obstacle avoidance using a circular path planning method. The proposed method makes circular paths in order to avoid obstacles in the front side of the mobile robot. An optimal path for approaching to the target is selected and the linear and angular speeds for stable moving of the mobile robot are controlled. Obstacles are detected by image processing which reduce image data obtained from a web camera. Performance of the proposed algorithm is shown by experiments with application to the Pioneer-2DX mobile robot.

• The Journal of Korea Robotics Society
• /
• v.4 no.3
• /
• pp.233-242
• /
• 2009

This paper briefly reviews the path planning methods that are applicable to the autonomous mobile robots for the military. Two distinct path search algorithms, $A^*$ and $D^*$ that are most popular and flexible in public applications, among those reviewed are coded and analyzed in terms of combat environment assessment factors called METT+TC for the area of operations. The results imply that it is important to consider the characteristics of defense acquisition process and the specific requirements of defense operation so that the successful technology development of the Robot products is directly linked to the defense procurement of Robot products.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.1992-2007
• /
• 1997

A new algorithm for planning a collision-free path is developed based on linear prametric curve. In this paper robot is assumed to a point, and two linear parametric curve is used to construct a path connecting start and goal point, in which single intermediate connection point between start and goal point is considered. The intermediate connection point is set in polar coordinate(${\theta}{\delta}$) , and the interference between path and obstacle is mapped into CPS(connection point space), which is defined a CWS GM(circular work space geometry mapping). GM of all obstacles in workspace creates overlapping images of obstacle in CPS(Connection Point Space). The GM for all obstacles produces overlapping images of obstacle in CPS. The empty area of CPS that is not occupied by obstacle images represents collision-free paths in Euclidian Space. A GM based on connection point in elliptic coordinate(${\theta}{\delta}$) is also developed in that the total length of path is depend only on the variable .delta.. Hence in EWS GM(elliptic work space geometry mapping), increasing .delta. and finding the value of .delta. for collision-free path, the shortest path can be searched without carring out whole GM. The GM of obstacles expersses all possible collision-free path as empty spaces in CPS. If there is no empty space available in CPS, it indicates that path planning is not possible with given number of connection points, i.e. path planning is failed, and it is necessary to increase the number of connection point. A general case collision-free path planning is possible by appling GM to configuration space obstacles. Simulation of GM of obstacles in Euclidian space is carried out to measure performance of algorithm and the resulting obstacle images are reported.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2342-2344
• /
• 1998

In this paper, the path planner is presented for a robot to achieve an efficient path forward the given goal position in two dimensional environment which is involved with partially unknown obstacles. The path planner consists of three major components: off-line path planning, on-line path planning, and modification of planned path. Off-line path planning is based on known environment and creates the shortest path. On-line path planning is for finding unknown obstacles. The modification can be accomplished, by genetic algorithm, to be smooth path for preventing slippage and excessive centrifugal force.

• IE interfaces
• /
• v.25 no.3
• /
• pp.365-375
• /
• 2012

An Unmanned Aerial Vehicle (UAV) is a powered pilotless aircraft, which is controlled remotely or autonomously. UAVs are an attractive alternative for many scientific and military organizations. UAVs can perform operations that are considered to be risky or uninhabitable for humans. UAVs are currently employed in many military missions and a number of civilian applications. For accomplishing the UAV's missions, guarantee of survivability should be preceded. The main objective of this study is to suggest a mathematical programming model and a $A^*PS$_PGA (A-star with Post Smoothing_Parallel Genetic Algorithm) for Multiple UAVs's path planning to maximize survivability. A mathematical programming model is composed by using MRPP (Most Reliable Path Problem) and MTSP (Multiple Traveling Salesman Problem). After transforming MRPP into Shortest Path Problem (SPP),$A^*PS$_PGA applies a path planning for multiple UAVs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1419-1423
• /
• 2004

In this paper, we propose an algorithm for planning an optimal path to capture a moving object by a mobile robot in real-time. The direction and rotational angular velocity of the moving object are estimated using the Kalman filter, a state estimator. It is demonstrated that the moving object is tracked by using a 2-DOF active camera mounted on the mobile robot and then captured by a mobile manipulator. The optimal path to capture the moving object is dependent on the initial conditions of the mobile robot, and the real-time planning of the robot trajectory is definitely required for the successful capturing of the moving object. Therefore the algorithm that determines the optimal path to capture a moving object depending on the initial conditions of the mobile robot and the conditions of a moving object is proposed in this paper. For real-time implementation, the optimal representative blocks have been utilized for the experiments to show the effectiveness of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.186-190
• /
• 2003

In this paper, we propose an algorithm for planning an optimal path to capture a moving object by a mobile robot in real-time. The direction and rotational angular velocity of the moving object are estimated using the Kalman filter, a state estimator. It is demonstrated that the moving object is tracked by using a 2-DOF active camera mounted on the mobile robot and then captured by a mobile manipulator. The optimal path to capture the moving object is dependent on the initial conditions of the mobile robot, and the real-time planning of the robot trajectory is definitely required for the successful capturing of the moving object. Therefore the algorithm that determines the optimal path to capture a moving object depending on the initial conditions of the mobile robot and the conditions of a moving object is proposed in this paper. For real-time implementation, the optimal representative blocks have been utilized for the experiments to show the effectiveness of the proposed algorithm.