• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2017

With the Development of Wireless Network Technology and Wireless Link Technology, Wireless Mesh Network (WMN) is Attracting Attention as a Key Technology to Construct the Wireless Transit Network. The WMN has been Studied for a Long Time in Various Fields, however there are still many Problems that have not been solved yet. One of them is the Routing Problem to find an Optimal path in a Multi-hop Network Composed of Wireless Links. In the Hybrid-WMN, which is one of the Three Types of WMN, Optimal Path Selection Requires Research on Path Search Protocols that Effectively use the Infrastructure Mesh as a Transit Network, Together with Research for a Routing Metric with Excellent Performance. Therefore, this Paper Proposes a Dual Mode-AODV(Ad hoc On-demand Distance Vector) for Hybrid-WMN. Simulation result shows that the Path Selection Delay was Reduced by 52% than AODV when the Proposed Dual Mode-AODV was applied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.614-623
• /
• 2008

A very low complexity QRD-M algorithm based on adaptive search area is proposed for MIMO systems. The conventional QRD-M scheme extends each survivor paths to all constellation symbols at each layer and selects M paths of minimum path metrics. We found that performance will not be degraded even if we adaptively restrict the survivor path extension only to the neighboring points of temporary detection symbol according to the channel condition at each layer. By employing this feature, we propose a new QRD-M algorithm achieving the near MLD performance with a reduced complexity. We employ the channel gain ratio among the layers as a channel condition indicator, which does not require SNR estimation. The simulation results show that the proposed scheme effectively achieves near MLD performance while maintaining the overall average computation complexity much smaller than the conventional QRD-M algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1468-1476
• /
• 1997

In mobile communication systems, the Reduced State Sequence Estimation(RSSE) receiver must be able to track changes in the channel. This is carried out by the adaptive channel estimator. However, when the tentative decisions are used in the channel estimator, incorrect decisions can cause error propagation. This paper presents a new channel estimator using the path history in the Viterbi decoder for preventing error propagation. The selection of the path history in the Viterbi decoder for preventing error propagation. The selection of the path history for the channel estimator depends on the path metric as in the decoding of the Viterbi decoder in RSSE. And a discussion on the channel estimator with different adaptation algorithms such as Least Mean Square(LMS) algorithm and Recursive Least Square(RLS) algorithm is provided. Results from computer simulations show that the RSSE receivers using the proposed channel estimator have better performance than the other conventional RSSE receiver, and that the channel estimator with RLS algorithm is adequate for multipath fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1207-1215
• /
• 2013

This paper proposes the location estimation techniques of distributed targets with the multi-sensor data perceived through IR sensors of the military robots in consideration of obstacles. In order to match up targets with measured azimuths, to add to the depth-first search (DFS) algorithms in free-obstacle environment, we suggest the expanded DFS (EDS) algorithm including bypass path search, partial path search, middle level ending, and the supplementation of decision metric. After matching up targets with azimuths, we estimate the coordinate of each target by obtaining the intersection point of the azimuths with the least square error (LSE) algorithm. The experimental results show the error rate of estimated location, mean number of calculating nodes, and mean distance between real coordinates and estimated coordinates of the proposed algorithms.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.650-656
• /
• 2003

A high speed Viterbi decoder with a circularly connected 2-dimensional analog processing ceil array Is proposed. The proposed Viterbi .decoder has a 2-dimensional parallel processing structure in which an analog processing cell is placed at each node of a trellis diagram, the output column of the analog processing cells is connected to the decoding column, and thus, the output(last) column becomes a column right before the decoding(first) column. The reference input signal given at a decoding column is propagated to the whole network while Its magnitude is reduced by the amount of a error metric on each branch. The circuit-based decoding is done by adding a trigger signals of same magnitudes to disconnect the path corresponding to logic 0 (or 1) and by observing its effect at an output column (the former column of the decoding column). The proposed Viterbi decoder has advantages in that it is operated with better performance of error correction, has a shorter latency and requires no path memories. The performance of error correction with the proposed Viterbi decoder is tested via the software simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.1-8
• /
• 2006

Network measurement is a vital part of network traffic engineering. In a network, the metric 'capacity' characterizes the maximum throughput the path can provide when there is no traffic load, or the minimum transmission rate among all links in a path. Pathrate is one of the most widely used network capacity measurement tools nowadays. It's famous for its accurate estimation result and non restriction of the temporal network traffic condition. After several years of development, its performance becomes more stable and reliable. Extant local modes detection algorithm in pathrate is based on statistic methodology histogram. This paper suggests a new algorithm for local modes detection based on ASH (Averaged Shifted Histogram). We have implemented this algorithm and will prove it can accomplish the same task as the original one with a better result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.14-19
• /
• 2009

In Mobile Ad-hoc Network, link failure and packet loss may occur frequently due to its nature of mobility and limited battery life. In this paper, an enhanced robust routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance is presented. If the node movement is detected, the routing agent switches local path to its neighbor node. Simulation results show that the performance of the proposed routing scheme is superior to previous AODV protocol.

• Journal of the Korean Society of Visualization
• /
• v.21 no.2
• /
• pp.14-23
• /
• 2023

The pressure difference across stenotic blood vessels is a commonly used clinical metric for diagnosing many cardiovascular diseases. At present, most clinical pressure measurements rely solely on invasive catheterization. In this study, we propose a novel method for non-invasive pressure estimation using the incompressible Navier-Stokes equations and a 3D multi-path integration approach. We verify spatio-temporal convergence on an in-silico dataset of a cylindrical straight pipe phantom with steady and pulsatile flow fields. We then evaluate the proposed method on an in vitro dataset of reconstructed control, pre-operative, and post-operative carotid artery cases acquired from 4D flow MRI. The performance of our method is compared to existing approaches based on the pressure Poisson equation and work-energy relative pressure. The results demonstrate the proposed method's high accuracy, robustness to spatio-temporal subsampling, and reduced sensitivity to noise, highlighting its great potential for non-invasive pressure estimation.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.653-662
• /
• 2016

This paper describes a test case generation algorithm for Simulink/Stateflow models based on the Rapidly exploring Random Tree (RRT) algorithm that has been successfully applied to path finding. An important factor influencing the performance of the RRT algorithm is the metric used for calculating the distance between the nodes in the RRT space. Since a test case for a Simulink/Stateflow (SL/SF) model is an input sequence to check a specific condition (called a test target in this paper) at a specific status of the model, it is necessary to drive the model to the status before checking the condition. A status maps to a node of the RRT. It is usually necessary to check various conditions at a specific status. For example, when the specific status represents an SL/SF model state from which multiple transitions are made, we must check multiple conditions to measure the transition coverage. We propose a unique distance calculation metric, based on the observation that the test targets are gathered around some specific status such as an SL/SF state, named key nodes in this paper. The proposed metric increases the probability that an RRT is extended from key nodes by imposing penalties to non-key nodes. A test case generation algorithm utilizing the proposed metric is proposed. Three models of Electrical Control Units (ECUs) embedded in a commercial vehicle are used for the performance evaluation. The performances are evaluated in terms of penalties and compared with those of the algorithm using a typical RRT algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.131-138
• /
• 2008

Mobile Ad hoc NETworks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad hoc networks. In this paper, an enhanced routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance named as LRC (Local Route Change) is presented. If the node movement is detected, the routing agent switches path to its neighbor node in LRC. Simulation results show that the performance of the proposed routing scheme is superior to previous AODY protocol.