• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.146-152
• /
• 2003

ATSC DTV receivers use repetitive data segment syncs or Gardner algorithm as a tuning recovery circuit. Many multipath signals can induce timing-offset in the symbol timing recovery circuit using Gardner algorithm and this timing-offset shifts sampling instant to the wrong points, causing the performance of the equalizer to become nr. When many echoes exist, the optimal sampling instant will be the Point at which the main-path has a peak value. In this paper, by using channel correlation techniques, we find the optimal sampling instant, thereby compensating the timing offset and improving DTV reception performance. We analyzed the Performance enhancement of DTV receivers using the timing offset compensator.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.91-98
• /
• 2004

TFLIM(Transverse Flux Linear Induction Motor), making its closed magnetic path with the direction of the traveling field orthogonal, had been developed to decrease an edge effect of the general induction motor. To control the levitation force and the thrust force on the secondary part of TFLIM independently, the various methodologies have been presented. When we try to achieve the independent control using only the multi-phase inputs assigned in the stator coils as an approach, in which condition we can minimize the coupling effect between two forces\ulcorner In this paper, we show the qualitative influence of a slip frequency, an ac magnitude, a dc offset superposed in the ac power, and a major parameter of TFLIM on the couple through the computer simulation. And to realize the independent motions between levitation and thrust motion without any auxiliary means fur isolation of the secondary part of TFLIM, the decouple compensator is suggested, including the experimental results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.358-363
• /
• 2019

If the EOIR equipment mounted on an unmanned aircraft transmits images and receives commands through a data link, there may be delays in data transmission depending on the transmission path of the data and the conditions of the ground equipment or wireless network. This increases the possibility of initial target LOCK-ON failure due to the difference between the time when the received image is viewed and the time when the image is taken. Therefore, this paper proposed a way to use frame indexes to synchronize with images, and to increase the success of target tracking by adding frame indexes to commands from the ground station.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.435-442
• /
• 2023

These days, the size of a reflective telescope has been increasing for astronomical observation. An additional optical system usually assists a large ground telescope for image analysis or the compensation of air turbulence. To guide collimated light to the external optical system through a designated path, a coudé mirror is usually adopted. Including a collimator, a coudé mirror of a ground telescope is affected by gravity, depending on the telescope's pointing direction. The mirror surface is deformed by the weight of the mirror itself and its mount, which deteriorates the optical performance. In this research, we propose an optimization method for the coudé mirror assembly for a 1-m class ground telescope that minimizes the gravitational surface error (SFE). Here the mirror support positions and the sizes of the mount structure are optimized using finite element analysis and the response surface optimization method in both the horizontal and vertical directions, considering the telescope's altitude angle. Throughout the whole design process, the coefficients of the Zernike polynomials are calculated and their amplitude changes are monitored to determine the optimal design parameters. At the same time, the design budgets for the thermal SFE and the mass and size of the mount are reflected in the study.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1845-1852
• /
• 2008

The key elements of inter prediction are motion estimation(ME) and motion compensation(MC). Motion estimation is to find the optimum motion vectors, not only by using a distance criteria like the SAD, but also by taking into account the resulting number of 비트s in the 비트 stream. Motion compensation is compensate for movement of blocks of current frame. Inter-prediction Encoding is always the main bottleneck in high-quality streaming applications. Therefore, in real-time streaming applications, dedicated hardware for executing Inter-prediction is required. In this paper, we studied a motion estimator(ME) for H.264/AVC. The designed motion estimator is based on 2-D systolic array and it connects processing elements for fast SAD(Sum of Absolute Difference) calculation in parallel. By providing different path for the upper and lower lesion of each reference data and adjusting the input sequence, consecutive calculation for motion estimation is executed without pipeline stall. With data reuse technique, it reduces memory access, and there is no extra delay for finding optimal partitions and motion vectors. The motion estimator supports variable-block size and takes 328 cycles for macro-block calculation. The proposed architecture is local memory-free different from paper [6] using local memory. This motion estimation encoder can be applicable to real-time video processing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.815-824
• /
• 2005

In this paper, we proposed a new DGS(Defected Ground Structure) Doherty amplifier for IMT-2000 band. Originally, active load-pull analysis of a Doherty amplifier assumes ideal harmonic termination condition. However, there have been no papers considering this ideal harmonic termination condition. We obtained excellent improvements of efficiency, gain, maximum output power as well as superior size reduction of a Doherly amplifier by satisfying the overlooked assumption of ideal harmonic termination through the adaptation of DGS at the output transmission line of carrier and peaking amplifier that is essential for Doherty operation. The amount of both the 2nd and the 3rd harmonic rejection of the proposed DGS Doherty amplifier over the conventional one are 44.92 dB and over 23.77 dB, respectively. The acquired improvement in Pl dB, gain, drain efficiency, and ACPR to WCDMA 1FA signal were 0.42 dB, 0.33 dB, $6.4\%$ and 5.4 dBc, respectively. Moreover, electrical length of $90{\circ}$ is reduced at each of the DGS carrier amplifier path and DGS peaking amplifier path, therefore the whole amplifier circuit size is considerably reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.473-483
• /
• 2004

In this paper, we numerically investigated the optimum pump light power best compensating for pulse distortion due to both chromatic dispersion and self phase modulation (SPM) as a function of channel input power in 8 channel ${\times}$ 40 Gbps wavelength division multiplexing (WDM systems. Also we investigated the allowable maximum channel input power dependence on modulation format and fiber dispersion coefficient in the various pump light power of OPC. The considered WDM transmission system is based on path-averaged intensity approximation (PAIA) mid-span spectral inversion (MSSI) compensation method, which has highly-nonlinear dispersion shifted fiber (HNL-SDF) as nonlinear medium of optical phase conjugator (OPC) in the mid-way of total transmission line. We confirmed that optimal pump light power of HNL-DSF OPC depend on modulation format, initial channel input power, total transmission length and fiber dispersion. But optimal pump light power of HNL-DSF OPC must be selected to make power conversion ratio to almost unity. And we confirmed that, if we allow a 1 dB eye opening penalty (EOP), the tolerable maximum channel input power is increased by using RZ than NRZ as modulation format when pump light power of HNL-DSF OPC is not optimal value but another values.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.91-105
• /
• 2023

This paper identified the difference in perception of the consignment system between the freight company and the consigned vehicle owners, derived factors that urgently need to improve the difference in perception, and presented the basis for establishing a management model based on this. A management model based on the difference in perception of consigned borrowers was established, and research hypotheses were established to conduct reliability, validity, and confirmatory factor analysis, path analysis, and mediation effect verification. As a result of the analysis, out of 58 questions, 56 of the total 65 questions showed a difference in perception of the consignment system between trucking companies and consigned vehicle owners, and the questions were input as management model factors. As a result of conducting confirmatory factor analysis, path analysis, and mediating effect verification using only recognition data, 5 hypotheses were adopted, and it was analyzed that the factor had no mediating effect. It can be analyzed that the appropriateness of the compensation system affects the improvement of each other's relationship, and the improvement of each other's relationship leads to the improvement of transportation services. However, since the mediating effect was rejected because it was not significant, this effect should not be exaggerated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.250-260
• /
• 2009

To improve work environment for health managers, it was investigated about effect of job stress, psychosocial stress and job satisfaction of health managers on job commitment. The sample used in this study consisted of 166 persons of industrial health managers. The data were collected with self-administered questionnaires between November 2007 and January 2008, and the results analyzed with ANOVA and multiple regression analysis. Job stress was evaluated by using a Korean Occupational Stress Scale(KOSS), and Psychosocial wellbeing index-Short Form(PWI-SF) was used for a psychosocial stress level evaluation. Organized commitment evaluated loyalty, compensation, welfare, job immersion, external employment opportunity, total agreement with employer and personal ability development. In path analyses, interpersonal conflict, lack of reward, psychosocial distress were associated with job satisfaction. And psychosocial distress, job demand, job insecurity, organizational system, occupational climate were associated with organizational commitment. In considering above findings, the health program for psychosocial distress, improvement of job demand, job insecurity, organizational system, occupational climate would be implemented to increase organizational commitment of Health manager.