• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.412-420
• /
• 2000

A treatment should be functional, esthetic, conservative and periodontally healthy in order to meet criteria of an ideal dental procedure. In a prsthodontic patient with horizontal and/or vertical space deficiency, orthodontic tooth movement should be considered as a pre-prosthetic procedure. With a conventional technique, orthodontic treatment is a time-consuming and uncomfortable procedure. Pre-prosthetic orthodontic treatment, however, is no longer difficult procedure with the help of recently developed techniques, such as passive bracketing. The present article outlines the problems and causes of horizontal and vertical space deficiency in prosthodontic patients, and presents efficient pre-prosthetic orthodontic treatment modalities with typical clinical cases.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.117-120
• /
• 2003

PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.446-448
• /
• 2005

Using tightly focused femtosecond laser pulses, we produce an optical waveguide and devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber- aligned optical splitter has a low insertion loss, less than 4 dB, including an intrinsic splitting loss of 3 dB and excess loss due to the passive alignment of a single-mode fiber. Finally, we present an output field pattern, demonstrating that the splitting ratio of the optical splitter becomes approximately 1:1.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2782-2787
• /
• 2008

The subcavity passive control technique is used in present study. Cavity-induced pressure oscillation has been investigated numerically for a supersonic three-dimensional flow over rectangular cavities at Mach number 1.83 at the cavity entrance. Time dependent supersonic turbulent flow over cavity were examined by using the three-dimensional, mass-averaged Navier-Stokes equations based on a finite volume scheme and large eddy simulation. The results showed that the resultant amount of attenuation of cavity-induced pressure oscillations was dependent on the length and thickness of the flat plate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.345-348
• /
• 2008

The subcavity passive control technique is used in present study. Cavity-induced pressure oscillation has been investigated numerically for a supersonic three-dimensional flow over rectangular cavities at Mach number 1.83 at the cavity entrance. The three-dimensional, compressible Navier-stokes equations are numerically solved based on a fully implicit finite volume scheme. The results showed that the resultant amount of attenuation of cavity-induced pressure oscillations was dependent on the length and thickness of the flat plate.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.152-156
• /
• 2019

An ultraviolet (UV) image sensor is an extremely important optoelectronic device used in scientific and medical applications because it can detect images that cannot be obtained using visible or infrared image sensors. Because photodetectors and transistors are based on different materials, conventional UV imaging devices, which have a hybrid-type structure, require additional complex processes such as a backside etching of a GaN epi-wafer and a wafer-to-wafer bonding for the fabrication of the image sensors. In this study, we developed a monolithic GaN UV passive pixel sensor (PPS) by integrating a GaN-based Schottky-barrier type transistor and a GaN UV photodetector on a wafer. Both individual devices show good electrical and photoresponse characteristics, and the fabricated UV PPS was successfully operated under UV irradiation conditions with a high on/off extinction ratio of as high as $10^3$. This integration technique of a single pixel sensor will be a breakthrough for the development of GaN-based optoelectronic integrated circuits.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.77-79
• /
• 2019

Islanding detection is one of the most important issues for the distributed generation (DG) systems connected to the power grid. The conventional passive islanding detection methods inherently have a non-detection zone (NDZ), and active islanding detection methods may deteriorate the power quality of a power system. This paper proposes a novel hybrid islanding detection method based on Digital Lock-In Amplifier with no NDZ by monitoring the harmonics present in the grid. Proposed method detects islanding by passively monitoring the grid voltage harmonics and verify it by injecting small perturbation for only three-line cycles. Unlike FFT for the harmonic extraction, DLA HC have lower computational burden, moreover, DLA can monitor harmonic in real time, whereas, FFT has certain propagation delay. The simulation results are presented to highlight the effectiveness of the proposed technique. In order to prove the performance of the proposed method it is compared with several passive islanding detection methods. The experimental results confirm that the proposed method exhibits outstanding performance as compared to the conventional methods.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2019

Current imbalance is the main factor affecting the lifespan of light-emitting diode (LED) lighting systems and is generally solved by active or passive approaches. Given many new lighting applications, independent control is particularly important in achieving different levels of luminance. Existing passive and active approaches have their own limitations in current sharing and independent control, which bring new challenges to the design of LED drivers. In this work, a multichannel resonant converter based on switched-capacitor control (SCC) is proposed for solving this challenge. In the resonant network of the upper and lower half-bridges, SCC is used instead of fixed capacitance. Then, the individual current of the LED array is obtained through regulation of the effective capacitance of the SCC under a fixed switching frequency. In this manner, the complexity of the control unit of the circuit and the precision of the multichannel outputs are further improved. Finally, the superior performance of the proposed LED driver is verified by simulations and a 4-channel experimental prototype with a rated output power of 20 W.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.3
• /
• pp.445-454
• /
• 1994

Osseointegrated implant prostheses are to provide normal function without compromising the unique interaction between the tissue and the implant. The essential requirement for the osseointegrated implant prostheses is passive fit of abutment. Therefore, the impression must be accurate and reproduciable since the resultant master cast precisely duplicates the clinical condition. The purpose of this study was to compare the accuracy of the master casts obtained from five impression techniques. Group 1 : To take impression with indirect technique and Impregum F. Group 2 : To take impression with unsplinted direct technique and Impregum F. Group 3 : To take impression with splinted direct technique and Impregum F. Group 4 : To take impression with unsplinted direct technique and Xanthano. Group 5 : To take impression with splinted dierct technique and Xanthano. The results were as follow : 1. In taking impression of Impregum F, there was no significant difference between to use of indirect technique and unsplinted direct technique.(p<0.05) 2. Unsplinted direct technique with Impregum F is less accurate than splinted direct technique with Impregum F or Xanthano and unsplinted direct technique with Xanthano.(p<0.05). 3. There was no significant difference between splinted direct technique with Impregum F and unsplinted direct technique with Xanthano.(p<0.05) 4. Splinted direct technique reproduce more accurate than unsplinted direct technique.(p<0.05) 5. Impression plaster produced less distortion than polyether.(p<0.05) As a result, splinted direct technique with Xanthano was the most accurate technique. As a result, splinted direct technique with Xanthano was the most accurate technique in this study. In addition to dimensinal changes in the materials used, positional errors were also attributed to the mechanical components used in the transfer porocess. Although the errors measured were relatively small, this study demonstrates the potential for distortions with the transfer technique used. Further study is indicated that ?the technique will be able to reproduce the intraoral relationship of implant fixtures reliably and predictably.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.196-201
• /
• 2017

Objective: Musculoskeletal neck pain have many symptoms which include decreased range of motion (ROM) and muscle strength, and increased pain. However, the management methods are controversial. The purpose of this study was to examine the effects of three interventions on ROM, strength, and pressure pain threshold (PPT) with musculoskeletal neck pain. Design: Pretest-posttest design. Methods: Thirty subjects participated in this experiment. They were randomly assigned to thefollowing groups: passive stretching (PS) group (n=10), massage (MASS) group (n=10), and muscle energy technique (MET) group (n=10). The treatment were applied bilaterally on the upper trapezius. The PS was applied 3 times for 30 seconds each time. The MASS was applied using two different techniques for 2 minutes per technique. For MET, the subjects performed 2 sets of 3 repetitions of isometric resistance exercise that was maintained for 10 seconds, followed by 10 seconds of rest. ROM, strength, and PPT parameters were measured after intervention. Results: In the MASS group, there was a significant improvement in all outcomes except for muscle strength (p<0.05). In the MET group, ROM and strength significantly improved compared to the pre-treatment results (p<0.05). As result of measuring the amount of change in each group, there was a significant difference in ROM (flexion) in the PS group compared with the MASS and MET group, a significant difference in strength in the MET group compared with the PS and MASS groups, and a significant difference in PPT in the MASS groups compared with the PS and MET groups (p<0.05). Conclusions: This study showed that PS, MASS, and MET are effective methods for improving ROM, strength, and PPT for musculoskeletal neck pain. Therefore, various therapeutic interventions for improving ROM, strength, and pain are suggested.