• 제목/요약/키워드: Passive mode-locking

검색결과 15건 처리시간 0.022초

Passive Mode-Locking of Nd:YAG laser with Saturable Absorber

  • Ahn, Seung-Joon
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.13-19
    • /
    • 1989
  • Passive mode-locking of a pulsed Nd:YAG laser is achieved with saturable absorbers, BDN dye in iodoethane solvent and Kodak Eastman # 26 dye in 1,2-dichloroethane solvent, and its optimum conditions are investigated. The thickness of saturable absorbers employed in the laser mode-locking is 0.16~0.50mm. The PBR (peak-to-background ratio) measured in the oscilloscope is 79.8% in Kodak Eastman # 26 dye at the neighbourhood of the peak power, whereas the passive mode-locking with BDN dye gives PBR of 67.7%. BDN and Kodak Eastman # 26 dyes are superior in photostability over Kodak eastman # 9860 and # 9740 dyes which were used previously in passive mode-locking. From the PBR curve, we find that Kodak Eastman # 26dye is more effective than BDN dye in passive mode-locking. The spacing between the adjacent pulses of the pulse train, which depends on the laser cavity length, is measured and is found to be 7 nsec for the cavity length of 100cm.

  • PDF

모드잠김 반도체 laser의 타이밍 지터및 크기 변조의 변조 신호 크기 의존성 (Modulation Depth Dependence of Timing Jitter and Amplitude Modulation in Mode-Locked Semiconductor Lasers)

  • Kim, Ji-hoon;Bae, Seong-Ju;Lee, Yong-Tak
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
    • /
    • pp.276.2-278
    • /
    • 2000
  • In a recent years, a number of approaches have been studied, including passive, active, and hybrid mode-locking of semi-conductor lasers for short pulse generation and research has been devoted to achieve low timing-jitter operation since the timing jitter is unfavorable for system applications. Among the methods of mode locking, passive mode locking does not need external rf drives, and therefore the operation and fabrication procedures are simplified. In spite of these attractive advantages of passive mode-locked laser, it has critical drawbacks such as large timing jitter and the difficulty in synchronization with external circuits. Their inherent large timing jitter value was shown to be suppressed to certain levels by means of hybrid mode-locking technique$^{(1)}$ , where the saturable absorber section was modulated by an external signal with the cavity round trip frequency. Furthermore, the subharmonic mode-locking (SHML) technique alleviates the restrictions of high speed driving electronics. It has been demonstrated experimentally$^{(1)}$ that the hybrid subharmonic mode-locking technique has lead to significant reduction of the timing jitter. (omitted)

  • PDF

Vector Passive Harmonic Mode-locking Fiber Laser Based on Topological Insulator Bi2Se3 Interacting with Fiber Taper

  • Li, Jian Ping
    • Journal of the Optical Society of Korea
    • /
    • 제20권1호
    • /
    • pp.135-139
    • /
    • 2016
  • I propose a vector passive harmonic mode-locked fiber laser based on topological insulator Bi2Se3 interacting with a fiber taper with a diameter of 7 μm. The particles of topological insulator are deposited uniformly onto the fiber taper with light pressure effect. By incorporating the fabricated saturable absorber into an Er-doped fiber laser cavity, stable mode-locked fiber is obtained. Due to the intense evanescent field of the fiber taper, strong confinement of light enhances the nonlinearity of the laser cavity, and passive harmonic mode-locking is performed. I observe a maximum harmonic mode-locking of 356th, corresponding to a frequency of 3.57 GHz. The pulse duration is 824 fs, and the full width at half maximum of the spectrum is about 8.2 nm. The polarization dependent loss of the saturable absorber is ~ 2.5 dB in the wavelength range of the C band. As the cavity contains no other polarization dependent device, the mode-locked laser is functioning in the vector state. The harmonic order vs pump power is investigated. To the best of our knowledge, this report is the highest frequency mode-locked fiber laser based on Bi2Se3. Experimental results indicate that the topological insulator Bi2Se3 functioning with a thin fiber taper is effective for vector harmonic mode-locking.

AlGaAs 진행파 반도체 레이저 광증폭기의 모드록킹 (Mode Locking of AlGaAs Semicondctor Laser Traveling Wave Amplifiers)

  • 이창희;강승구;정기웅;임시종;유태경
    • 전자공학회논문지A
    • /
    • 제32A권1호
    • /
    • pp.119-128
    • /
    • 1995
  • We report hybrid and passive mode-locking results of tilted-stripe AlGaAs semiconductor laser traveling wave amplifiers with saturable absorbers. Dependence ofthe pulse width on the mode locking frequency, the bandwidth of spectral filters, and the bias current of the laser amplifier are investigated. We generate 4 ps optical pulses by using the hybrid mode locking technique. The repetition rate and the peak power of generated pulses are 516 MHz and 170 mW, respectively. The tuning range of uor mode locked laser is 10 nm with the center wavelength of 780 nm. We also generate 2.6 ps optical pulses with peak power of 830 mW by using the passive mode locking technique.

  • PDF

비선형 Loop Mirror 방식을 이용한 '8'자 고리형 Erbium 광섬유 레이저의 수동형 모드 록킹 (Passive Mode Locking of Figure '8' Type Erbium-doped Fiber Ring Laser Using Nonlinear Loop Mirror)

  • 박희갑
    • 한국광학회지
    • /
    • 제4권3호
    • /
    • pp.330-337
    • /
    • 1993
  • Erbium이 첨가된 광섬유를 이득 매질로 하여 광섬유 loop mirror가 포함된 '8' 자 형태의 고리형 광섬유 레이저를 구성하였다. Loop mirror내의 양방향으로 진행하는 두 광파간의 비선형적 위상차로 인하여 loop mirror의 투과율이 입사광 강도에 의존함으로써 수동형의 모드록킹이 가능하였으며, 외부 perturbation 이나 변조소자의 도움없이도 공진기내의 편광조절기만의 조절에 의해 모드록킹ㅇ르 시작시킬 수 있었다. 또한 모드록킹에 의한 펄스 출력 파형을 비선형 loop mirror의 투과특숭과 관련하여 고찰하여 보았다.

  • PDF

Solid-State Laser Mode-Locking Near 1.25 μm Employing a Carbon Nanotube Saturable Absorber Mirror

  • Cho, Won-Bae;Choi, Sun-Young;Kim, Jun-Wan;Yeom, Dong-Il;Kim, Ki-Hong;Rotermund, Fabian;Lim, Han-Jo
    • Journal of the Optical Society of Korea
    • /
    • 제15권1호
    • /
    • pp.56-60
    • /
    • 2011
  • We demonstrate passive mode-locking of a Cr:forsterite laser with a single-walled carbon nanotube saturable absorber mirror (SWCNT-SAM). Without compensation of intra-cavity dispersion, the self-mode-locked laser generates 11.7 ps pulses at a repetition rate of 86 MHz. The dispersion-compensated laser yields ultrashort pulses as short as 80 fs near $1.25\;{\mu}m$ at 78 MHz with average output powers up to 295 mW, representing the highest power ever reported for mode-locked solid-state lasers based on saturable absorption of SWCNTs in this spectral region.

수동 광 가입자망에서의 위상고정루프를 이용한 버스트모드 클럭/데이터 복원회로 (Burst-mode Clock and Data Recovery Circuit in Passive Optical Network Implemented with a Phase-locked Loop)

  • 이성철;문성용;문규
    • 대한전자공학회논문지SD
    • /
    • 제45권4호
    • /
    • pp.21-26
    • /
    • 2008
  • 본 논문에서는 Instantaneous locking 특성을 갖는 새로운 구조의 수동형 광가입자망용 622Mbps급 버스트모드 클럭/데이터 복원회로를 제안하고, 이를 구현하였다. 이 회로는 고속 클럭신호를 발생하는 위상고정루프 와 버스트모드에서의 클럭/데이터 복원회로 두 개의 블럭으로 구성되어 있다. 클럭/데이터 복원회로 에서는 위상고정루프의 클럭을 지연소자를 통해 7개의 서로 다른 클럭신호로 발생시킨다. 이 경우 광가입자망에 지터를 가지고 있는 신호가 입력되어도 항상 데이터의 중앙에 클럭이 정렬되도록 조정하여 최적의 샘플링 시점에서 데이터를 복원하게 된다. 제안한 구조에 대한 검증을 위하여 0.35umn-well CMOS 공정을 이용하여 회로의 동작을 확인하였다.

선형 공진기 구조 광섬유 레이저에서 Sagnac loop를 이용한 수동형 모우드록킹 (Passive Mode Locking of Linear Cavity Fiber Laser with a Sagnac Loop)

  • 박희갑;이경화;오왕열;이해웅;김병윤
    • 한국광학회지
    • /
    • 제5권1호
    • /
    • pp.125-130
    • /
    • 1994
  • 광섬유 레이저의 수동형 모우드록킹을 위한 새로운 공진기 구조를 제안하고 이를 실험하였다. 광섬유 레이저 공진기의 한쪽 끝에는 이색성 평면경을 부착하였으며, 다른쪽 끝은 긴길이의 광섬유 Sagnac loop로 이루어진 비선형 loop mirror로 구성하였다. Er 첨가 광섬유 레이저와 Nd 첨가 광섬유 레이저의 각각의 경우에 대한 모우드록킹의 실험결과를 기술하였다.

  • PDF

Muxed Oscillator를 이용한 622Mbps 버스트모드 클럭/데이터 복원회로 (Novel 622Mb/s Burst-mode Clock and Data Recovery Circuits with the Muxed Oscillators)

  • 김유근;이천오;이승우;채현수;류현석;최우영
    • 한국통신학회논문지
    • /
    • 제28권8A호
    • /
    • pp.644-649
    • /
    • 2003
  • 새로운 구조의 622Mbps급 버스트 모드 클럭/데이터 복원 회로를 구현하였다. 회로는 2개의 muxed oscillator (MO)와 위상 동기 회로 등으로 구성되어 있으며, passive optical network(PON) 시스템에 사용될 수 있도록 instantaneous locking 특성을 갖는다. 또한. 지터가 내재된 데이터가 인가되어도 데이터에 따라 클럭이 연동되어 항상 최적의 샘플링 포인트를 갖는다. 이 회로는 0.35$\mu\textrm{m}$ CMOS 공정을 이용하여 제작되었다. 측정 결과 제안된 클럭/데이터 복원 회로는 400Mbps 680MbPs 까지의 버스트 모드 입력 데이터를 에러없이 복원하였다.