• 천문학회보
• /
• 제36권1호
• /
• pp.64.1-64.1
• /
• 2011

MIRIS (Multipurpose Infra-Red Imaging System), is a small infrared space telescope which is being developed by KASI, as the main payload of Science and Technology Satellite 3 (STSAT-3). Two wideband filters (I and H) of the MIRIS enables us to study the cosmic infrared background by detecting the absolute background brightness. The narrow band filter for Paschen ${\alpha}$ emission line observation will be employed to survey the Galactic plane for the study of warm ionized medium and interstellar turbulence. The opto-mechanical design of the MIRIS is optimized to operate around 200K for the telescope, and the cryogenic temperature around 90K for the sensor in the orbit, by using passive and active cooling technique, respectively. The engineering and qualification model of the MIRIS has been fabricated and successfully passed various environmental tests, including thermal, vacuum, vibration and shock tests. The flight model was also assembled and is in the process of system optimization to be launched in 2012 by a Russian rocket. The mission operation scenario and the data reduction software is now being developed. After the successful mission of FIMS (the main payload of STSAT-1), MIRIS is the second Korean space telescope, and will be an important step towards the future of Korean space astronomy.

• Nuclear Engineering and Technology
• /
• 제43권6호
• /
• pp.557-566
• /
• 2011

A cold spray coating (CSC) of copper was studied for its application to a high-level radioactive waste (HLW) disposal canister. Several copper coatings of 10 mm thick were fabricated using two kinds of copper powders with different oxygen contents, and SS 304 and nodular cast iron were used as their base metal substrates. The fabricated CSC coppers showed a high tensile strength but were brittle in comparison with conventional non-coating copper, hereinafter defined to as "commercial copper". The corrosion behavior of CSC coppers was evaluated by comparison with commercial coppers, such as extruded and forged coppers. The polarization test results showed that the corrosion potential of the CSC coppers was closely related to its purity; low-purity (i.e., high oxygen content) copper exhibited a lower corrosion potential, and high-purity copper exhibited a relatively high corrosion potential. The corrosion rate converted from the measured corrosion current was not, however, dependent on its purity: CSC copper showed a little higher rate than that of commercial copper. Immersion tests in aqueous HCl solution showed that CSC coppers were more susceptible to corrosion, i.e., they had a higher corrosion rate. However, the difference was not significant between commercial copper and high-purity CSC copper. The decrease of corrosion was observed in a humid air test presumably due to the formation of a protective passive film. In conclusion, the results of this study indicate that CSC application of copper could be a useful option for fabricating a copper HLW disposal canister.

• PNF and Movement
• /
• 제13권3호
• /
• pp.135-143
• /
• 2015

Purpose: The purpose of this study was to assess the effect of the proprioceptive neuromuscular facilitation (PNF) relaxation technique (hold relax; HR, contract relax; CR) and static stretch (SS) on hamstring flexibility and vertical jump performance in healthy adults over a four-week period. Methods: Twenty-four healthy adults volunteered to participate in PNF and static stretch sessions. The subjects were divided into three groups as follows: 8 subjects in the SS group, 8 subjects in the HR group, and 8 subjects in the CR group. In the HR and CR groups, contractions lasted 15 seconds per trial and consisted of 5 sets of 15 seconds of hamstring contraction immediately followed by 15 seconds of passive static hamstring stretching. For the static group, the participants were asked to stretch by hanging a leg over a table for 30 seconds. Subjects in all groups performed the exercises three days per week for 4 weeks. The active straight leg raising (ASLR) test, active knee extension (AKE) test, and vertical jump test were performed before the intervention and after 1, 2, and 4 weeks. Results: The SS, HR, and CR techniques effected positive improvement in hamstring flexibility and vertical jump performances but neither of the stretching methods had any statistically significant different effects according to group, although there were interactions (between group and time) in the ALSR group from 1 week to 2 week and in the AKE test from pretest to 1 week. Conclusion: Based on the results of the current study, SS, HR, and CR were shown to affect hamstring flexibility and vertical jump performance in healthy adults. In particular, it was determined that within a short period, hamstring flexibility could be attributed more to CR than to SS.

• 정보보호학회논문지
• /
• 제29권3호
• /
• pp.549-555
• /
• 2019

최근 AV 벤더들의 악성코드 동향 보고서에 따르면 신종, 변종 악성코드의 출현 개수가 기하급수적으로 증가하고 있다. 이에 따라 분석 속도가 떨어지는 수동적 분석방법을 대체하고자 기계학습을 적용하는 악성코드 분석 연구가 활발히 연구되고 있다. 하지만 지도학습기반의 기계학습을 이용할 때 많은 연구에서 AV 벤더가 제공하는 신뢰성이 낮은 악성코드 패밀리명을 레이블로 사용하고 있다. 이와 같이 악성코드 레이블의 낮은 신뢰성 문제를 해결하기 위해 본 논문에서는 새로운 레이블링 기법인 "Unified Labeling"을 소개하고 나아가 Fine-grained 방식의 특징 분석을 통해 악성 행위 유사성을 검증한다. 본 연구의 검증을 위해 다양한 기반의 클러스터링 알고리즘을 이용하여 기존의 레이블링 기법과 비교하였다.

• 한국공간구조학회논문집
• /
• 제19권3호
• /
• pp.51-59
• /
• 2019

A hybrid mid-story seismic isolation system with a smart damper has been proposed to mitigate seismic responses of tall buildings. Based on previous research, a hybrid mid-story seismic isolation system can provide effective control performance for reduction of seismic responses of tall buildings. Structural design of the hybrid mid-story seismic isolation system is generally performed after completion of structural design of a building structure. This design concept is called as an iterative design which is a general design process for structures and control devices. In the iterative design process, optimal design solution for the structure and control system is changed at each design stage. To solve this problem, the integrated optimal design method for the hybrid mid-story seismic isolation system and building structure was proposed in this study. An existing building with mid-story isolation system, i.e. Shiodome Sumitomo Building, was selected as an example structure for more realistic study. The hybrid mid-story isolation system in this study was composed of MR (magnetorheological) dampers. The stiffnessess and damping coefficients of the example building, maximum capacity of MR damper, and stiffness of isolation bearing were simultaneously optimized. Multi-objective genetic optimization method was employed for the simultaneous optimization of the example structure and the mid-story seismic isolation system. The optimization results show that the simultaneous optimization method can provide better control performance than the passive mid-story isolation system with reduction of structural materials.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.55-57
• /
• 2022

본 연구에서는 체내심부 광테라피를 위한 맞춤형 반수동 RFID 수신 모듈 시스템을 구현한다. 생체 내부는 피부, 지방, 근육, 골격 및 수분으로 구성되어 체내 심부까지 RF신호 전송에는 한계가 있기 때문에 새로운 전송 방법 연구가 필요하다. 최근 소개된 RFID기반 CIB 빔포밍 기술은 체내와 같이 채널추정이 힘든 환경에서 높은 신뢰도로 무선전송이 가능한 기술이다. 제안하는 RFID기반 미니어처 광캡슐은 소형컨트롤러, 초소형 LED Array, 무선통신용 RFID 칩으로 구성된다. 표준 RFID 프로토콜(ISO-16000-8c)을 기반으로 UHF대역 RFID 안테나를 통해 외부리더기와 무선접속이 가능하며, 사용자 USER BANK 접근을 통해 제어신호 전송이 가능하다. 입력된 제어신호에 따라 캡슐의 테라피용 LED를 멀티레벨 디밍제어, 시간제어 가능하다. 제작된 RFID 광테라피 캡슐의 통신 접속 과정을 분석하고 신뢰도를 평가하였다.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1310-1319
• /
• 2024

The reactor cavity cooling system (RCCS) is a passive reactor safety system commonly present in the designs of High-Temperature Gas-cooled Reactors (HTGR) that removes heat from the reactor pressure vessel by means of natural convection and radiation. It is one of the factors responsible for ensuring that the reactor does not melt down under any plausible accident scenario. For the simulation of accident scenarios, which are transient phenomena unfolding over a span of up to several days, intermediate fidelity methods and system codes must be employed to limit the models' execution time. These models can quantify radiation heat transfer well, but heat transfer caused by natural convection must be quantified with the use of correlations for the heat transfer coefficient. It is difficult to obtain reliable correlations for HTGR RCCS heat transfer coefficients experimentally due to such a system's size. They could, however, be obtained from high-fidelity steady-state simulations of RCCSs. The Rayleigh number in RCCSs is too high for using a Direct Numerical Simulation (DNS) technique; thus, a Reynolds-Averaged Navier-Stokes (RANS) approach must be employed. There are many RANS models, each performing best under different geometry and fluid flow conditions. To find the most suitable one for simulating an RCCS, the RANS models need to be validated. This work benchmarks various RANS models against three experiments performed on the HTTR RCCS Mockup by the Japanese Atomic Energy Agency (JAEA) in 1993. This facility is a 1/6 scale model of a vessel cooling system (VCS) for the High Temperature Engineering Test Reactor (HTTR), which is operated by JAEA. Multiple RANS models were evaluated on a simplified 2d-axisymmetric geometry. They were found to reproduce the experimental temperature profiles with errors of up to 22% for the lowest temperature benchmark and 15% for the higher temperature benchmarks. The results highlight that the pragmatic turbulence models need to be validated for high Rayleigh natural convection-driven flows and improved accordingly, more publicly available experimental data of RCCS resembling experiments is needed and indicate that a 2d-axisymmetric geometry approximation is likely insufficient to capture all the relevant phenomena in RCCS simulations.

• 대한약리학회지
• /
• 제18권2호
• /
• pp.89-102
• /
• 1982

The $Na^+-and\;K^+-induced\;Ca^{++}$ release was measured isotopically by millipore filter technique in pig heart mitochondria. With EGTA-quenching technique, the characteristics of mitochondrial $Ca^{++}-pool$ and the sources of $Ca^{++}$ released from mitochondria by $Na^+\;or\;K^+$ were analyzed. The mitochondrial $Ca^{++}-pool$ could be distinctly divided into two components: internal and external ones which were represented either by uptake through inner membrane, or by energy independent passive binding to external surface of mitochondria, respectively. In energized mitochondria, a large portion of $Ca^{++}$was transported into internal pool with little external binding, while in de-enerigzed state, a large portion of transported $Ca^{++}$ existed in the external pool with limited amount of $Ca^{++}$ in the internal pool which was possibly transported through the $Ca^{++}-carrier$ present in the inner membrane. $Na^+$ induced the $Ca^{++}$ release from both internal pool and external pool and external binding pool of mitochondria. In contrast, $K^+$ did not affect $Ca^{++}$ of the internal pool, but, displaced $Ca^{++}$ bound to external surface of the mitochondria. When the $Ca^{++}-reuptake$ was blocked by EGTA, the $Ca^{++}$ release from the internal pool by $Na^+$ was rapid; the rate of $Ca^{++}-efflux$ appeared to be a function of $[Na^+]^2$ and about 8mM $Na^+$ was required to elicit half-maximal velocity of $Ca^{++}-efflux$. So it was revealed that $Ca^{++}-efflux$ velocity was particulary sensitive to small changes of the $Na^+$ concentration in physiological range. Energy independent $Ca^{++}-binding$ sites of mitochondrial external surface showed unique characteristics. The total number of external $Ca^{++}-binding$ sites of pig heart mitochondria was 29 nmoles per mg protein and the dissociation constant(Kd) was $34{\mu}M$. The $Ca^{++}-binding$ to the external sites seemed to be competitively inhibited by $Na^+\;and\;K^+$; the inhibition constant(Ki) were 9.7 mM and 7.1 mM respectively. Considering the intracellular ion concentrations and large proportion of $Ca^{++}$ uptake in energized mitochondria, the external $Ca^{++}-binding$ pool of the mitochondria did not seem to play a significant role on the regulation of intracellular free $Ca^{++}$ concentration. From this experiment, it was suggested that a small change of intracellular free $Na^+$ concentration might play a role on regulation of free $Ca^{++}$ concentration in cardiac cell by influencing $Ca^{++}-efflux$ from the internal pool of mitochondria.

• 사상체질의학회지
• /
• 제12권1호
• /
• pp.48-62
• /
• 2000

1950년 Guilford가 창의성의 중요성을 강조한 이후 창의성 계발에 대한 관심은 교육계에서 지속되어 왔다. 최근 들어 창의성은 더욱 강조되어 기업체는 물론 학교 현장에서도 창의력을 신장하기 위해 다양한 교수학습 방법을 모색하고 있다. 이 중에서 Osborn에 의해 개발된 집단 브레인스토밍은 어떤 구체적인 문제를 해결하기 위한 자유연상 기법의 한 가지로 전세계적으로 널리 적용되고 있다. 브레인스토밍의 원칙은 주어진 시간 안에 많은 아이디어를 내야 하기 때문에 평가를 유보해야 하고, 타인의 아이디어로부터 히치하이킹이 가능해야 하고 우스꽝스러운 아이디어도 받아들여야 한다. 그런데 유교문화권의 한국인들은 발표력이 부족하고, 타인의 시선을 의식하기 때문에 브레인스토밍이 효과를 제대로 거두지 못하고 있다. 또한 집단 BS에서 발생하는 아이디어 생산 차단현상, 획일적인 사고, 평가불안, 사회적인 태만성과 같은 문제로 인하여 아이디어의 양과 질이 감소하기도 한다. 그래서 본 연구에서는 1894년 이제마에 의해 창안된 사상체질 분류(태양인, 태음인, 소양인, 소음인)를 토대로 하여 어떠한 방식으로 집단을 형성할 때 아이디어가 많이 나올 수 있는가에 대한 문헌 분석을 하고자 한다. 또한 본 연구에서는 예비관찰을 실시한 내용을 근거로 하여 창의적인 잠재능력이 최대한 발휘될 수 있는 집단 형성과 이에 적절한 교수 학습 방법을 제안하고 있다. 이러한 연구를 하기 위해 태양인과 소양인으로 구성된 양의 집단과 소음인과 태음인으로 구성된 음의 집단 학생들의 집단을 관찰하여 양과 음의 집단을 혼합하여 집단을 형성하였을 때를 비교하여 각기 브레인스토밍의 참여도를 분석하였다. 이를 근간으로 하여 교육 현장에서 집단 브레인스토밍을 실시할 때 고려해야 할 몇 가지 유의사항을 제안하고 있다.

• 대한치과보철학회지
• /
• 제56권2호
• /
• pp.173-178
• /
• 2018

직접식 금속 레이저 소결 방식 시스템은 기공 오차 및 주조 결함 없이 제작 비용 및 제조 시간 단축을 장점으로 전악 임플란트 지지 고정성 보철물 제작에 유용하다. 본 증례에서는 직접식 금속 레이저 소결 방식과 치과용 캐드캠으로 제작된 단일구조 지르코니아 크라운을 사용하여 무치악 상악에서 임플란트 지지 고정성 치과 보철물의 성공적인 결과를 보고하고 임상적 의의를 평가하였다. 51세의 건강한 중년 여성이 상악 전 치아의 동요도를 주소로 서울대학교 치과병원에 내원하였다. 모든 상악 치아 발치 후 직접식 금속 레이저 소결 기술 및 캐드캠 단일구조 지르코니아 크라운을 사용하여 코발트-크롬 프레임을 포함하는 임플란트 지지 고정성 치과 보철물을 제작하였다. 최종 수복물 장착 6개월 후, 기계적 및 생물학적 합병증은 발견되지 않았고 보철물은 기능 및 심미적으로 만족스러운 결과를 보였다. 직접식 금속 레이저 소결 시스템을 이용하여 추가적인 기공 작업 없이 임플란트 지지 고정성 보철물을 제작하여 제조 시간을 단축하고 신뢰할 수 있는 정확도와 적합성을 얻었다.