• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.199-202
• /
• 2002

This paper is about the implementation of Passive RFID(Radio Frequency Identification) tag system using a capacitive method, and explains the design and circuit's structure of this system. Fundamentally the capacitive RFID tag system consists of a tag reader, a passive tag and a host computer. And then this paper shows the system's prototype which analyzes a specification, and suggests the passive RFID system as a new method which manufactures a low cost tag system easily

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.220-226
• /
• 2014

This paper proposes an enhanced fast scanning method for multi-agent robot system. Passive RFID tag can read and store the information within the range of recognizable RF tag reader. Based on this information of Passive RFID tag, the position of mobile robot can be estimated and at the same time, the efficiency of scanning process can be improved because it provides a scanning trace for other mobile robots. This paper proposes an dfficient motion planning algorithm for mobile robots in a smart floor environment.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.199-202
• /
• 2000

RFID (Radio Frequency Identification) is a technique which is used for identifying different types of objects and tracking people and animals. Passive RFID consists of reader, a passive tag. The reader transmit energy to a tag and read information back from tag. The tag is energized by a carrier frequency which is transmitted by the reader and transmit information back to the reader. In this paper, the circuit for read and write RFID system is presented. The presented RFID system adopts 125kHz carrier frequency, backscattering and PSK for communication method.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.382-392
• /
• 2011

This paper proposes the streaming radio frequency identification (RFID) protocol to support robust data streaming in a passive communication, which is extended from the ISO18000-6 Type C RFID standard. By observing and modeling the unique bit error behavior through detailed analysis in this paper, we found that performance is significantly limited by inaccurate and unstable link frequencies as well as low SNR which are inevitable for passive devices. Based on the analysis, we propose a simple and efficient protocol to adaptively insert extra error control sequences in a packet for tolerating tough link condition while maximizing the throughput and preserving the minimal implementation cost. To evaluate effectiveness of our proposal in real-time streaming applications, we experimented on real-time H.264 video streaming and prototyped the system on FPGA. To our best knowledge, our paper is the first work to take analytical approach for maximizing the throughput and demonstrate the possibility of the realtime multimedia streaming transmission in the passive RFID system.

• The Journal of Society for e-Business Studies
• /
• v.16 no.3
• /
• pp.113-127
• /
• 2011

An RFID system has been widely applied in many areas over the initial SCM application. In the literature enormous RFID applications in healthcare are documented to improve patient safety, patient/provider logistics, and the efficiency of collecting data. Based on the proposed 4-layered RFID system architecture, we introduce a case that implemented an UHF passive RFID-based tracking system in an outpatient clinic. Particularly, we propose a method to process RFID data that contains noise and missing reads. The proposed method for processing unreliable RFID data is capable to locate the tag accurately and provide additional business information. We finally conclude the paper with identifying obstacles and what is necessary to ensure system reliability.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.1-7
• /
• 2011

In this paper, we design rectifing circuits at 910MHz, which is used for passive RFID system, for wireless power transmission system by using two types of schottkey diodes HSMS_2822 and HSMS 2852, and the RF-DC conversion efficiencies for the curcuits are compared and analyzed in terms of input power and load resistance. When the input power is -20 to 17dBm, the conversion efficiency for HSMS_2852 is larger than in case of HSMS_2822. The output voltage and current at the load of the fabricated rectifying circuit are measured through a dipole antenna when input power is transmitted by a RFID reader and the diatance varies. The measured ouput volatge and current for the distance of 50cm are 2.5V and 5.75mA.

• The Journal of Society for e-Business Studies
• /
• v.19 no.1
• /
• pp.1-14
• /
• 2014

This paper presents the development of a stock control system of POP system design based on RFID in SCM and its economic efficiency. A stock control system is proposed for 900MHz passive type RFID system. The RFID system is composed of a RFID reader and four antennas to read the tag IDs. A cost estimation model is adapted based on the total product profit by various tag prices. The result of the economic efficiency analysis can indicate any invested model for the automation system which have initial investment should be used. This solution indicates the limit of the break even point according to the input. And it can be concluded that the stock control can be developed by RFID readers and passive tags with directional arrangement of several antennas. Also, the economical evaluation model can be a decision method for company to adapt the new developed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1159-1166
• /
• 2006

In this paper, we have designed a RFID reader receiver system for improving the performance of the passive Tag based 9$'908.5{\sim}914MHz'$ RFID reader, and analyzed the system performance according to the frequency, the reader, and tag properties. The commercial receive system causes a loss in sensitivity because of 24 capacitors and 6 inductors. So we have designed an improved system using a circulator, LNA and a SAW filter. The experimental results show that the use of a circulator to separate the Tx/Rx paths eliminates interference, the LNA improves the sensitivity of the Rx module and SAW filter eliminates the noise and spurious components in the received signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.124-130
• /
• 2007

RFID technology is considered as a promising solution to increase efficiency of port logistics. Especially active RFID technology, such as e-Seal for container security, is receiving attention nowadays. If active RFID system is combined with passive RFID and legacy bar-code system overall efficiency of port logistics can be improved However, due to the device dependent control interface of RFID readers, there are many difficulties in making active-passive combined RFID system environment. In this paper, we introduce Smart Reader Interface (SRI) system, which provides a device independent RFID reader interrace to control different kinds of RFID readers by hiding device dependent control interface through adapter architecture which is similar to device driver of conventional operating systems. The key design objectives of SRI are the followings; conformance to the related standard. efficiency in processing, easy addition of an adapter for a new RFID reader. Actually, the implemented SRI system can support various kinds of commercial RFID readers, and through the test carried out not only in laboratory but also in the container terminal in the GwangYang Port, its practicality is verified.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.347-350
• /
• 2008