• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4329-4337
• /
• 2022

Jet impinging device is designed for decay heat removal on horizontal fuel rods in a low temperature heating reactor. An experimental system with a fuel rod simulator is established and experiments are performed to evaluate water film covering capacity, within 0.0287-0.0444 kg/ms mass flow rate, 0-164.1 kW/m² heating flux and 13.8-91.4℃ feeding water temperature. An effective method to obtain the film coverage rate by infrared equipment is proposed. Water film flowing patterns are recoded and the film coverage rates at different circumference angles are measured. It is found the film coverage rate decreases with heating flux during single-phase convection, while increases after onset of nucleate boiling. Besides, film coverage rate is found affected by Marangoni effect and film accelerating effect, and surface wetting is significantly facilitated by bubble behavior. Based on the observed phenomenon and physical mechanism, dry-out depth and initial dry-out rate are proposed to evaluate film covering potential on a heating surface. A model to predict film coverage rate is proposed based on the data. The findings would have reliable guide and important implications for further evaluation and design of decay heat removal system of new reactors, and could be helpful for passive containment cooling research.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.45-55
• /
• 2006

This paper presents the results of full-scale uplift load tests performed on 30 passive anchors grouted to various lengths at Taean site in Korea. Various rock types were tested, ranging from highly weathered to sound gneiss. Rock anchors were installed over a wide range of rock types and qualities with a fixed anchored depth of $1{\sim}4m$. The majority of installations used SD4O-D51 no high grade steel rebar to induce rock failure prior to rod failure. In many tests, rock failure was reached and the ultimate loads were recorded along with observations of the shape and extent of the failure surface. The test results, the failure mechanisms as well as uplift capacities of rock anchors depend mostly on rock type and quality, embedded fixed length, and the strength of rebar. Based on test results, the main parameters governing the uplift capacity of the rock anchor system were determined.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.10
• /
• pp.5-15
• /
• 2009

This paper presents the results of full-scale uplift load tests performed on 24 passive anchors grouted to various lengths at Okchun and Changnyong site. Rock anchors were installed over a wide range of rock types and qualities with a fixed anchored depth of 1~6 m. The majority of installations used D51 mm high grade steel rebar to induce rock failure prior to rod failure. However, a few installations included the use of D32 mm rebar at relatively deeper anchored depth so as to induce rod failure. In many tests, rock failure was reached and the ultimate loads were recorded along with observations of the shape and extent of the failure surface. In addition to field tests, laboratory pullout tests were conducted to determine bond strength and bond stress-shear slip relation at the tendon/grout interface when a corrosion protection sheath is installed in the cement-based grout. The test results show that the ultimate tendon-grout bond strength is measured from 18~25% of unconfined compressive strength of grout. One of the important results from these tests is that the measured strains along the corrosion protection sheath were so small that practically the reduction of bond strength by the presence of sheath would be negligible.

• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.739-750
• /
• 2023

This study examines the two-level behavior of the toggle brace damper within a steel frame having a yielding pipe damper and rotational friction damper. The proposed system has two kinds of fuse for energy dissipation in two stages. In this mechanism, rotational friction damper rather than hinged connection is used in toggle brace system, connected to a pipe damper with a limited gap. In order to create a gap, bolted connection with the slotted hole is used, such that first a specific movement of the rotational friction damper solely is engaged but with an increase in movement, the yielding damper is also involved. The performance of the system is such that at the beginning of loading the rotational friction damper, as the first fuse, absorbs energy and with increasing the input load and further movement of the frame, yielding damper as the second fuse, along with rotational friction damper would dissipate the input energy. The models created by ABAQUS are subjected to cyclic and seismic loading. Considering the results obtained, the flexibility of the hybrid two-level system is more comparable to the conventional toggle brace damper. Moreover, this system sustains longer lateral displacements. The energy dissipation of these two systems is modeled in multi-story frames in SAP2000 software and their performance is analyzed using time-history analysis. According to the results, permanent relocations of the roof in the two-level system, in comparison with toggle brace damper system in 2, 5, and 8-story building frames, in average, decrease by 15, 55, and 37% respectively. This amount in a 5-story building frame under the earthquakes with one-third scale decreases by 64%.

• Korean Journal of Culture and Social Issue
• /
• v.9 no.spc
• /
• pp.1-14
• /
• 2003

The purpose of this paper is to introduce eight articles which were written on the psychological mechanisms of accidents in Korean society and to suggest alternatives to prevent them. All of these articles were presented during the "Symposium of Safety" at the Annual Conference of the Korean Psychological Association, at Youngnam University through October 18~19, 2002. Frequently occurring accidents in Korean society are a very serious and enduring social issue. Psychological and cultural factors, as well as environmental factors, were found to be leading causes of the various accidents. The preventative alternatives for these accidents should be developed taking into account these factors. A nation-wide comprehensive institute for accident management is necessary to control accidents and to study and to develop preventive programs. The attitude of psychologists also needs to shift from the laboratory to the field toward accidents and from passive to aggressive toward issues facing Korean society.

• Convergence Security Journal
• /
• v.24 no.2
• /
• pp.55-61
• /
• 2024

With the development of IoT technology, wearable services have also developed rapidly. Wearable devices required for this service are used as sensors and controllers in the form of smart bands. Wearable devices implement very concise SWlogic for possible long-term use and use wireless communication protocols to improve convenience. However, because this wearable device aims to be lightweight, it is more vulnerable to security than terminals used for other information services. Many smart healthcare or smart medical services are passive or do not apply security technology. By exploiting this security environment, attackers can obtain or modify important information through access to wearable devices. In this study, we analyzed the technical operating environment of wearable services and identified authentication information reuse attacks, BIAS attacks, battery drain attacks and firmware attacks on wearable devices. And we analyzed the mechanism of each security threat and confirmed the attack effect. In this study, we presented a response plan to respond to the identified security threats. When developing wearable services, it is expected that safer services can be built if the response plan proposed in this study is considered.

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.126-134
• /
• 2006

Purpose: The aim of this study was to determine the kinematical characteristics of the pendular and the translational movements of each cervical vertebra at flexion and extension for understanding the mechanism of injury to the cervical spine. Methods: Twenty volunteers, young men (24~37 years), with clinically and radiographically normal cervical spines were studied. We induced two directional passive movements and then took X-ray pictures. The range of pendular movement could be measured by measuring the variation of the distance between the center point of two contiguous cervical vertebrae, and the range of translational movement could be measured by measuring the variation of the shortest distance between the center point of a vertebra and an imaginary line connecting the center points of two lower contiguous cervical vertebrae. The measurements were done by using a picture archiving and communicating system (PACS). Results: The total length of all cervical vertebrae in the neutral position was, on average, 133.66 mm, but in both flexion and extension, the lengths were widened to 134.83 mm and 134.79 mm, respectively. The directions of both the pendular and the translational movements changed at the $2^{nd}$ cervical vertebra, and the ranges of both movements were significantly larger from the $5^{th}$ cervical vertebra to the $7^{th}$ cervical vertebra for flexion and combined flexion and extension motion (p<0.05). Conclusion: The kinematical characteristics for flexion and extension motions were variable at each level of cervical vertebrae. The $1^{st}$ and the $2^{nd}$ cervical vertebrae and from the $5^{th}$ to the $7^{th}$ cervical vertebrae were the main areas of cervical spinal injury. This shows, according to "Hook's law," that the tissues supporting this area could be weak, and that this area is sensitive to injury.

• Advances in Traditional Medicine
• /
• v.9 no.2
• /
• pp.115-127
• /
• 2009

Samsoeum (SSE) is used in traditional oriental medicine for various medicinal purposes. However, the exact mechanism that accounts for the anti-allergy and anti-inflammatory effects of the SSE is still not fully understood. The aim of the present study is to elucidate whether and how SSE modulates the allergic reactions in vivo, and inflammatory reaction in vitro. In this study, we showed that SSE significantly decreased compound 48/80-induced systemic anaphylaxis, ear-swelling response, histamine release from preparation of rat peritoneal mast cells and anti-dinitropheny IgE-induced passive cutaneous reaction. Also, SSE inhibited the expression of inflammatory cytokine and cyclooxygenase-2 in PMA plus A23187-stimulated human mast cells (HMC-1). In addition, we showed that anti-inflammatory mechanism of SSE is through suppression of nuclear factor-${\kappa}B$ activation and $I{\kappa}B-{\alpha}$ phosphorylation/degradation in HMC-1. These results provided new insight into the pharmacological actions of SSE as a potential molecule for therapy of inflammatory allergic diseases.

• The Korean Journal of Physiology
• /
• v.7 no.1
• /
• pp.23-31
• /
• 1973

Numerous factors concern with the absorption of substances through the membrane of the gastrointestinal tract. To simplify the experimental condition, present work has been restricted to observe the disappearance rate of substance from the intestinal loop which was made in the jejunum, 70 cm apart from the pylorus of the adult rabbit. The purpose of the study is to clarify the absorption of urea through the jejunal wall is solely attributable to the concentration difference between the luminal fluid and plasma, and to observe the effect of adding red pepper upon the rate of absorption. The rabbits were anesthetized with nembutal, 35mg/kg I.V. Jejunal loop was made by ligating at 2 spots, 70 cm and 80cm apart from the pylorus. After rinsing with normal saline solution through the polyethylene tubing inserted from the end of the loop, 8 ml of test solution was placed through the same tubing. The test solution contained 200 mg% of urea and 150mg% of polyethylene glycol(M.W. 4,000) in normal saline solution. Right after placing the test solution the first specimen was taken through the tubing, and successive samplings were performed at 5, 10, 20, and 30 minutes. Logarithm of the difference of urea concentration between the luminal fluid and plasma was plotted against time elapsed after the onset of the experiment. If straight line is revealed, it would verify the nature of transport mechanism as diffusion, obeying the Fick's principle. The concentration of polyethylene glycol (PEG) was also measured in order to examine the change in the volume. PEG was used as the marker substance because it is not absorbable in the intestinal tract. Consequently the concentration of PEG relates inversely to the volume of the loop. Instantaneous concentration of urea in the loop times the volume will give the amount of urea remaining in the luminal fluid. The change in the amount of any substance is directly relate to the volume of the compartment and differs from the change in the concentration which is independent of the volume. After completion of the experiment without red pepper, it was added in the test solution and was centrifuged after thorough mixing. Supernatant of the mixture was placed in the loop and similar sampling were performed with the same time intervals that of previous run in order to observe the effects of the red pepper on the passive transport of the water soluble small substance, urea. The results obtained were as follows: 1. Logarithm of the concentration difference of urea between the luminal fluid and plasma was diminished exponentially as time elapsed. The decay constant in the experiment without red pepper was 0.0563/min. By adding red pepper in the test solution as much as the concentration rose to 4,000 mg% and 8,000 mg%, the decay constants were lowered to 0.0493/min and to 0.0506/min, respectively. The time interval by which the concentration difference dropped to one half of the initial value was prolonged. Without red pepper the half concentration time was 13.30 minutes, and by adding extract of red pepper, 15.31 minutes and 15.71 minutes were revealed. 2. The profile of the diminishing rate of tile amount of urea was quite different from that of the concentration because of the change in the volume of the loop during the observed period. 3. By adding the extract of red pepper, it slowed down the rate of absorption of urea in the intestinal loop, suggesting an increase in the diffusional barrier. 4. Larger dosage of red pepper brought an increase in the secretion of intestinal fluid with concomitant expansion of the luminal volume, and the retardation of the absorption of urea was noticed. This effect was largely dependent on the sensitivity of the individual animal to the red pepper, extract. The amount of urea remained after 10 minutes interval was 55.5% of the initial amount in the experiment without red pepper. On the other hand it was not consistent after administration of red pepper, showing 50.6% and 66.5% of the initial figures by adding 400 mg and 800 mg of red pepper in the test solution, respectively. It was postulated that symptom of diarrhea often encountered by taking a hot (red pepper) food might be attributable to the increase of secretion and the retardation of absorption in the intestinal tract.

• Journal of Arbitration Studies
• /
• v.27 no.4
• /
• pp.199-222
• /
• 2017

Currently, many punitive damages (or statutory damages) and class action laws are discussed in relation to the consumer damage relief system. It is in the background of the argument that the introduction of such a victim relief system will solve many small and large consumer damages. There are many cases in which the punitive damages compensation or the class action system are introduced in relation to the food safety damage naturally. Although the introduction of such a system can clearly help the consumer to relieve large-scale damage, it can not solve all the problems at once because the company can reject the system despite the introduction of such a system. In particular, class action lawsuits should have the same type of damage, but most of the damage caused by food safety is accompanied by physical harm, resulting in various complications such as the physical characteristics of the victim, the health environment. The class action system may not provide a solution in that the content and type of the damage may be different. In this regard, this study aims to investigate the introduction of the food safety damage relief system through the introduction of an administrative dispute settlement system by an administrative agency that occupies an absolute position in the existing consumer protection from this point of view. In reality, the Food and Drug Administration, which is the largest among government agencies related to food, operates a passive attitude consumer protection system such as function like guidance, supervision and surveillance. And it is necessary to make a complementary proposal. In the current law, there is only a small part of the consumer protection work that is positively legal, and even after the damage is scientifically identified, it is not possible to present the solution to the damage suffered by the consumer through legislation. This is a fact that has been raised. In this paper, we propose a reasonable and rapid disaster relief procedure through a separate mechanism within the administrative agency, which is the administration agency, that the dispute settlement procedure due to food safety damage is insufficient by solving the case through the court through counseling, dispute adjustment and civil proceedings. In order to solve the problem of food insecurity and the food industry, various ways of rational solution of the problem were considered. The possibility of (1) Establishment of a food safety dispute resolution committee; (2) Establishment of a food safety disaster relief committee; and (3) Establishment of a food safety disaster relief committee was discussed. In addition, a plan for the creation of a food damage compensation fund was also proposed.