• Structural Engineering and Mechanics
• /
• v.33 no.3
• /
• pp.339-355
• /
• 2009

The sealed, tuned liquid column gas damper (TLCGD) with gas-spring effect extends the frequency range of application up to about 5 Hz and efficiently increases the modal structural damping. In this paper the influence of several TLCGDs to reduce coupled translational and rotational vibrations of plan-asymmetric buildings under wind or seismic loads is investigated. The locations of the modal centers of velocity of rigidly assumed floors are crucial to select the design and the optimal position of the liquid absorbers. TLCGD's dynamics can be derived in detail using the extended non-stationary Bernoulli's equation for moving reference systems. Modal tuning of the TLCGD renders the optimal parameters by means of a geometrical transformation and in analogy to the classical tuned mass damper (TMD). Subsequently, fine-tuning is conveniently performed in the state space domain. Numerical simulations illustrate a significant reduction of the vibrations of plan-asymmetric buildings by the proposed TLCGDs.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1402-1412
• /
• 2017

This paper presents a new high step-up dc/dc converter for renewable energy systems in which a high voltage gain is provided by using a coupled inductor. The operation of the proposed converter is based on a charging capacitor with a single power switch in its structure. A passive clamp circuit composed of capacitors and diodes is employed in the proposed converter for lowering the voltage stress on the power switch as well as increasing the voltage gain of the converter. Since the voltage stress is low in the provided topology, a switch with a small ON-state resistance can be used. As a result, the losses are decreased and the efficiency is increased. The operating principle and steady-states analyses are discussed in detail. To confirm the viability and accurate performance of the proposed high step-up dc-dc converter, several simulation and experimental results obtained through PSCAD/EMTDC software and a built prototype are provided.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.2
• /
• pp.157-164
• /
• 2022

This study proposes an enhanced quadruple-Active-Bridge (QAB) converter that can solve power coupling problems. By adopting a multiple winding transformer, the equivalent circuit of a conventional QAB converter has power couplings between arbitrary output ports. This coupling is an unintended power relationship that complicates the regulation of output voltage of the multiple ports. The proposed converter can carry out power decoupling by changing the arrangement of the coupling inductor. Power transfer equations for the proposed converter and its operating principles are analyzed in detail. The power coupling caused by the transformer's leakage inductance is verified by using a proposed coupling factor that presents the relationship between inductance ratio and coupling power. In addition, the decoupling power control performance of the proposed converter is verified by simulation and a 3 kW prototype converter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.603-611
• /
• 2011

After Kyoto Protocol was adopted for green gas reduction, each nations are stepping up efforts to reduce $CO_2$ of a typical green gas. Construction industry also is trying $CO_2$ reduction with the techniques of two types which are software and hardware techniques. The software technique are Passive Design considered green gas emission and the environment impact assessment by LCA. The hardware techniques are adjustment of equipment system and development of eco- friendly material. But, it is nonexistent that a study related to $CO_2$ emission considered detail process in construction industry. This study analyzed the correlation of equipment combination, $CO_2$ emission and duration by calculate $CO_2$ emission follow to equipment combination on earth-work which is the process emitted most $CO_2$ among railway bedding construction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.872-882
• /
• 2005

In this paper, we examined the operating principle of a passive tag antenna for RFID system in UHF band. Based on the study, we proposed a novel RFID tag antenna which adopts the inductively coupled feeding structure to match antenna impedance to a capacitively loaded commercial tag chip. The proposed tag antenna consists of microstrip lines on a thin PET substrate for low-cost fabrication. The detail structure of the tag antenna were optimized using a full electromagnetic wave simulator of IE3D in conjunction with a Pareto genetic algorithm and the size of the tag antenna can be reduced up to kr=0.27($2 cm^2$). We built some sample antennas and measured the antenna characteristics such as a return loss, an efficiency, and radiation patterns. The readable range of the tag antenna with a commercial RFID system showed about 1 to 3 m.

• Journal of the Korean association of regional geographers
• /
• v.17 no.6
• /
• pp.726-737
• /
• 2011

This study reviews in detail the background of the establishment of 'Medicity Daegu', new city brand of Daegu Metropolitan City. This study also analyses both passive and active aspects of place image named 'Medicity Daegu'. To reveal passive images toward the city's new brand name, this study examines the perception of university students in Daegu Metropolitan City. On the other hand, active images are explored by analyzing strategies the city government and research institutes has adopted for the image-making and examining diverse landscapes and events the city have taken place. It was expected in the first place that the new image could help the city make more competitive, and boost its regional economy through the spread of the new city image. However, the city has currently faced difficulties to spread the new city image and has a limitation to acquire uniquely distinctive image because of overlapped images pursued by other city governments in the fields of medical industry and medical services. Some considerations are then suggested regarding the current status of the image of "Medicity Daegu".

• KIEAE Journal
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

Purpose: The purpose of this study is to analyze the energy performance by applying new technologies for passive and active control. Method: We selected new technologies for passive and active control which are based on formal study by analyzing technology applied to the High-Performance Buildings in various countries. Also, we analyzed energy saving potential for each technologies by breakdown the result of the energy saving rates in detail. Result: For the wall and roof insulating methods, preceding studies showed that up to 21% energy could be saved by improving roof insulation and applying proper outside insulation compared to non-insulation. For the windows and glazing system, preceding studies showed that Low-E glazing system could save up to 11% energy compared to single glazing system. Studies about solar and daylighting controls revealed that effective daylighting dimming control could save 13% of energy compared to uncontrolled situation. Studies on DOAS (Dedicated Outdoor Air System) showed that about 23% energy could be saved compared to standard VAV system. Studies on the active chilled beam showed that about 25% energy could be saved compared to standard VAV system and studies of applying UFAD (Under Floor Air Distribution) could consume 31% less energy than applying overhead system.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.69-84
• /
• 1994

In the present study, the application of a method of anchored or waste tyre wall in reinforcing the unstable slope is investigated. For design purposes a method of external stability analysis of the reinforced slope, together with a method of internal stability analysis of a wall itself, is presented. In order to predict the passive resistance expected in the anchor or waste tyre Meyerhof's bearing capacity theory is moapaed and experimental results of stress distribution of a pile section under lateral loading is used. Hurray's pull-out teat results are compared with the passive resistances of anchors predicted by the proposed method, and alto the advantages in design are compared with a method of reinforced earth wall with steel strips. Finally a design example of reinforced slope using anchored or caste tyre wall is presented and the overall stability is analyzed in detail by the proposed method of analysis. The efficiency of a method of anchored or waste tyre wall is further analyzed, comparing with a method of changing geometry of the origin리 unstable slope.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.40.3-40.3
• /
• 2019

There is growing evidence for the dependence of Type Ia supernova (SN Ia) luminosities on the environments. The origin of this correlation, however, is under debate. In order to explore the physical origin of the trend in detail, we analyze SN Ia light-curves by combining a sample of 1231 SNe Ia over a wide redshift range (0.01 < z < 1.37) in various SN surveys and employing two independent light-curve fitters of SALT2 and MLCS2k2. Although SALT2 is the most widely used fitter in the SN community, MLCS2k2 has a novelty in the context of an investigation of the luminosity evolution of SNe Ia. For this reason we use both fitters and analyze them separately. We also determine a stellar mass and a star formation rate (SFR) for a sample of ~600 host galaxies. In addition, because recent low-redshift studies suggest that this dependence manifests itself most strongly when using the local SFR at the SN location, we introduce a new method to infer the local environments by restricting the SN Ia sample in globally star-forming host galaxies to a low-mass host galaxy subset (${\leq}10^{10}M_{\odot}$). We find that SNe Ia in low-mass and star-forming host galaxies are fainter than those in high-mass and passive hosts, after light-curve corrections. Especially, for the first time in host studies, we show that SNe Ia in locally star-forming environments are $0.081{\pm}0.018$ mag fainter ($4.5{\sigma}$) than those in locally passive environments from the sample including SNe at the high-redshift range. Considering the significant difference in the mean stellar population age between these environments, the result would suggest that the origin of the environmental dependence is the luminosity evolution of SNe Ia.

• Journal of the Korean Society of Costume
• /
• v.52 no.6
• /
• pp.41-50
• /
• 2002

The purpose of this study is to classify korean clothing image using brainstorming method. Brainstorming theme is selected 'The Land of Morning Calm 'which famed to foreigner about Korea. Brainstorming members were 10 persons for 1st. 9 persons for End. The 119 words of association from 'morning calm'were to extracted at 1st brainstorming. The group of senses image were to classified at End brainstorming. The results of this study were as follows : 1. The clothing image type of tactual sense implied feeling of that downy bedding in a soft spring and grandmother's hands as warm. rough. 2. The clothing image type of smelling sense associated smells of pleasant. mild. and fresh. 3. The clothing image type of auditive sense consisted mainly sense of indirect. resonance. small, and clear sounds. 4. The clothing image type of visual sense associated pure, passive, gentle, and lasting life-force as weeds and wild flowers. Korean line is pointless and rounded curve. Korean form is soft silhouette as streamy, not exaggerate and wavy detail of slim and short. Korean color is not dyed, just natural color and pastel tone. Korean textile is a natural material as linen, ramie. and coarse silk.