• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.175-184
• /
• 2011

With a development of implant restoration technique, there are increasing use of computer-guided system for edentulous patients. It was carried out simulated operation based on CT information about patient's bone quantity, quality and anatomical landmark. However, there are some difference between the programmed implant and post-operative implant about it's position. If the deviation was severe, it could happen a failure of 'passive fit' and not suited for path of implant restoration. The aim of this presentation is to evaluate about a degree of deviations between programmed implant and post-operative implant. Five patients treated by 'NobelGuide' system (Nobel Biocare AB, G$\ddot{o}$teborg, Sweden) in Department of Prosthodontics, Inha University were included in this study. The patients were performed CT radiograph taking and intra-oral impression taking at pre-operation. Based on CT images and study model, surgical stent was produced by NobelBiocareTM. To fabricated a pre-operative study model, after connected lab analog to surgical template, accomplished a pre-operative model using type 4 dental stone. At final impression, a post-operative study model was fabricated in the conventional procedures. Each study model was performed CT radiograph taking. Based on CT images, each implant was simulated in three dimensional position using $Procera^{(R)}$ software (Procera Software Clinical Design Premium, version 1.5; Nobel Biocare AB). In 3D simulated model, length and angulation between each implant of both pre- and post-operative implants were measured and recorded about linear and angular deviation between pre-and post-operative implants. A total of 24 implants were included in this study and 58 inter-implant sites between each implant were measured about linear and angular deviations. In the linear deviation a mean deviation of 0.41 mm (range 0~1.7 mm) was reported. In the angular deviation, a mean deviation was $1.99^{\circ}$ (range $0^{\circ}{\sim}6.7^{\circ}$). It appears that the both linear and angular mean deviation value were well acceptable to application of computer-guided implant system.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.42-59
• /
• 2014

Han Pilgyo (1807~1878) was a scholar-official in the later period of the Joseon Dynasty. The research results on spatial structure and landscape techniques of the central government office reviewed through the Sukcheonjeado(宿踐諸衙圖) album collection edited by Han Pilgyo are as follows. First, Sukcheonjeado(宿踐諸衙圖) using Sabangjeondomyobeob(四方顚倒描法, a Korean traditional drawing type) is uniquely proven historical data which helps to understand the spatial structure of the center and local government offices and the characteristics of cultural landscape. Secondly, the central government office located in Yookcho(六曹) Street which is the outside Gwanghwamun(光化門) of the Main Palace(Gyeongbokgung, 景福宮) of the Joseon Dynasty has a center facility(Dangsangdaecheong, 堂上大廳) and attached buildings which are distributed from high to low or from left to right, according to its order of presidency in square-shaped portion of land. The main building was located facing south and by considering the administrative convenience, the environmental effect and the practice of Confucian norms this structure reflects a hierarchical landuse system. Thirdly, the main buildings such as Dangsangdaecheong and Hyangcheong(鄕廳), which are the working place for government officials had large square front yards for constructing a practical patio garden. The back garden was tended to reflect the meaning landscape, with such as pond and pavilion. A particular point was the repeated crossing of active space and passive space(movement and stillness, building and yard, yard and garden), which implements the Yin-Yang principle. Fourth, the characteristics that can be extracted from the central government office landscapes are (1) expandability of outdoor space, connects of front gardens, emphasizes the characteristic of serviceable gardens and back gardens, which in turn emphasizes scenic sides, (2) introduction of water features(square-shaped ponds) that can be used as fire-water and considers environmental-amenity and landscape characteristics, (3) introduction of pavilions for relaxation, mental and physical discipline, and the development of back gardens, (4) significance of Jeongsimsoo(庭心樹) in such things as selection of concise landscape plants like lotus, willow, pine, zelkova and so on, and limited plant introduction, (5) environmental design techniques which set importance on not only aesthetics and ideality but also practical value. Thus, these aspects of the government office landscape can be said to be the universality and particularity of Korean traditional landscape technique and can be extracted similarly in the palaces, temples, lecture halls, and houses of the upper class of the Joseon Dynasty.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.331-337
• /
• 2014

In conventional bar- and clip-retained overdentures, all errors during impression making and cast fabrication result in non-passive fit of bars. SFI bar is prefabricated and assembled in the patient's mouth without the use of soldering, laser welding or conventional bonding techniques, thus reducing stress transmission to, bone loss around the implants and leading to fewer errors and lower costs. A clinical case will be presented below to demonstrate the use of the SFI Bar (Stress Free on Implant Bar) to restore an severe atrophy edentulous maxilla. In this case, no lateral stress could be applied to the implants due to the telescopic design of the bar joints. However, periodic recall check is necessary and long-term clinical results are required.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.114-124
• /
• 2015

The concepts of activity involvement(AI) and place attachment(PA) are useful for explaining the sustainable use of natural resources by humans. Although several studies have investigated the effects of AI and PA on environmental behaviors and found its implications, it has not examined the simultaneous effects of both AI and PA. Thus, the purpose of this study was to develop a typology of both AI and PA. This typology was used to explain the environmentally responsible behaviors of visitors. The study sample surveyed 587 users of the main trail in Namhansanseong Provincial Park The results were analyzed by frequency, reliability, factor analysis, cross-tabulation, T-test, correlation and ANOVA analysis. As a result, the typology identified four subgroups of hikers based on involvement in hiking and attachment to setting. Results also indicate that environmentally responsible behaviors do vary significantly across typology. In detail, general environmental behavior and specific environmental behavior were significantly different between the four groups. These finding suggests that PA seems to play a more powerful role than AI in relation to environmental behavior. While more involved and more attached hikers were more active in environmental behaviors, less involved and less attached hikers had a more passive attitude. In this respect, this study placed emphasis on the fact that the future resource management of tourism and outdoor recreation may be established based on its activity experience in certain place.

• Journal of The Korean Association For Science Education
• /
• v.40 no.3
• /
• pp.347-358
• /
• 2020

He purpose of this study is to design and apply a pilot assessment tools for scientifically gifted and talented elementary school students with lower grades. The assessment tool consists of three parts: homeroom teachers' recommendation, paper and pencil test and performance tests. The tools are verified whether they are suitable for unique characteristics of young children and enable to attract active participation. For suitability check, students' performance tests were inductively analyzed and 30 behavioral patterns were shown which were included and partially exceeded the level of lower elementary students' performance expectation in NGSS. As a result, we concluded that assessment tool developed in this study will be effective in discriminating young pupils' scientific talents. Then for participation check, we compared the number of coding references as an indicator of participation. Two cases were found that students with high interest participated passively in performance tests. We found these 'passive participants' had excessive scientific experiences and extremely narrow region of interest, during the process of complex interpretation between the results of this assessment tool and in-depth interviews with homeroom teachers. We found out in this study that newly developed tools can be used in school scene after modifying and elaboration through accumulation of more case studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.715-720
• /
• 2016

This paper proposes a PWM (Pulse Width Modulation) voltage mode DC-DC step-up converter for portable devices. The converter, which is operated with a 1 MHz switching frequency, is capable of reducing the mounting area of passive devices, such as inductor and capacitor, and is suitable for compact mobile products. This step-up converter consists of a power stage and a control block. The circuit elements of the power stage are an inductor, output capacitor, MOS transistors Meanwhile, control block consist of OPAMP (operational amplifier), BGR (band gap reference), soft-start, hysteresis comparator, and non-overlap driver and some protection circuits (OVP, TSD, UVLO). The hysteresis comparator and non-overlapping drivers reduce the output ripple and the effects of noise to improve safety. The proposed step-up converter was designed and verified in Magnachip/Hynix 0.18um 1-poly, 6-metal CMOS process technology. The output voltage was 5 V with a 3.3 V input voltage, output current of 100 mA, output ripple less than 1% of the output voltage, and a switching frequency of 1 MHz. These designed DC-DC step-up converters could be applied to the Personal Digital Assistants(PDA), cellular Phones, Laptop Computer, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.753-759
• /
• 2005

In this paper, we have developed a new type of single balanced mixer with the RF MEMS $180^{\circ}$ hybrid coupler using surface micromachining technology. The $180^{\circ}$ hybrid coupler in this mixer is composed of the dielectric-supported air gapped microstriplines(DAMLs) which have signal line with $10{\mu}m$ height to reduce substrate dielectric loss and dielectric posts with size of $20{\mu}m{\times}20{\mu}m$ to elevate the signal line on air with stability At LO power of 7.2 dBm, the conversion loss was 15.5 dB f3r RF frequency or 57 GHz and RF power of -15 dBm. Also, we obtained the good RF to LO isolation of -40 dB at LO frequency of 58 GHz and LO power of 7.2 dBm. The main advantage of this type of mixer is that we are able to reduce the size of the chips due to integrating the MEMS passive components.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.8
• /
• pp.825-836
• /
• 2010

The advancement of electronic records brought great changes of the records management system. One of the biggest changes is the transition from passive to automatic management system, which manages massive records more efficiently. The integrated Rule-Oriented Data System (iRODS) is a rule-oriented grid system S/W which provides an infrastructure for building massive archive through virtualization. It also allows to define rules for data distribution and back-up. Therefore, iRODS is an ideal tool to build an electronic record management system that manages electronic records automatically. In this paper we describe the issues related to design and implementation of the electronic record management system using iRODS. We also propose a system that serves automatic processing of distribution and back-up of records according to their types by defining iRODS rules. It also provides functions to store and retrieve metadata using iRODS Catalog (iCAT) Database.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.26-34
• /
• 1999

According to increase of nonlinear power electronics equipment, active power filters have been researched and developed for many years to compensate harmonic disturbances and reactive power. However the commercial of active power filter is being proceeded slowly, because the cost of active power filter compared to the passive filter for harmonic and reactive power compensation is expensive. Especially, the use of DSP (Digital Signal Processing) chip, which is frequently used to control 3-phase active power filter, is a factor of increasing the cost of active power filters. On the other hand, the use of only analog controller makes the controller's circuits much more complicate and depreciates the flexibilities of controller. In this paper, a controller with low cost for 5[kVA] 3-phase active power filter system is designed. To reduce the expense of active filter system, the presented controller is composed of digital control part using Intel 80C196KC $\mu$P and analog control part using hysteresis controller for current control. Characteristic analysis of designed controller for active filter system is performed by computer simulation and compensating characteristics of the designed controller are verified by experiment.tegy can apply to the vector control, leading to better output torque capability in the ac motor drive system. This strategy is that in the overmodulation range, the d-axis output current is given a priority to regulate the flux well, instead the q-axis output curent is sacrificed. Therefore, the vector control even in the overmodulation PWM operation can be achieved well. For this purpose, the d-axis output voltage of a current controller to control the flux is conserved. the q-axis output voltage to control the torque is controlled to place the reference voltage vector on the hexagon boundary in case of the overmodulation. The validity of the proposed overall scheme is confirmed by simulation and experiments for a 22[kW] induction motor drive system.