• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.426-433
• /
• 2008

We first demonstrated simultaneous patterning and passivation of P3HT active layer with photosensitive PVA. The passivation layers were obtained by annealing the organic layers after developing PVA and subsequent over-etching the P3HT layer. The fabricated OTFTs were electrically characterized. The OTFTs exhibited the mobility of ${\sim}5.9{\times}10^{-4}\;cm^2/V{\cdot}s$ and on/off current ratio of ${\sim}10^4$. After passivation, the results showed the extended lifetime of ${\sim}250$ hours with photosensitive PVA layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.191-191
• /
• 2007

By employing a photo-sensitive PVA as a photoresist, we first demonstrated simultaneous patterning and passivation of P3HT active layer. The passivation layers were obtained by annealing the organic layers after developing PVA and over-etching the P3HT layer. The fabricated OTFTs were electrically characterized. The OTFTs after the passivation exhibited the field-effect of ${\sim}5.9{\times}10^{-4}cm^2/V{\cdot}s$, on/off current ratio of ${\sim}10^3$. The value of OTFTs a little degradation with time in air but it appeared different unpassivated OTFT.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.325-325
• /
• 2010

최근 결정질 실리콘 태양전지 분야에서는 태양전지의 Voc와 Isc의 증가를 통한 효율 향상을 목적으로 후면 passivation에 대한 연구가 활발하게 진행되고 있다. Local-Back Contact은 최적화된 후면 passivation 박막을 이용한 태양전지 제조방법이다. 고효율 태양전지 개발을 위해 최적의 laser 가공 조건이 확립되어야 한다. 본 연구에서는 고효율의 LBC 태양전지 개발을 위해 ONO 구조의 후면 passivation 박막에 laser ablation 조건을 가변하여 LBC 태양전지를 제작하고 그 특성을 분석하였다. 본 연구에 사용된 laser는 355nm 파장을 갖는 UV laser를 사용하였다. laser 파워는 5W, 주파수는 30kHz로 하였을 때 폭 20um, 깊이 5um의 홀을 형성시킬 수 있었다. 후면 접촉 면적의 영향을 확인하기 위하여 laser ablation 간격을 300um, 500um, 700um으로 가변하여 공정을 진행하였다. 태양전지 제조 결과 spacing 300um일 경우 효율이 높게 측정되었으며, laser ablation의 데미지를 줄이기 위한 FGA 처리시 웨이퍼 표면의 데미지를 줄여 carrier lifetime 향상에 기여하는 것을 확인할 수 있었다. 본 연구의 결과를 이용하여 향후 후면 passivation 극대화 및 접촉면적 가변을 통한 고효율 LBC 태양전지 개발이 가능할 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.55.2-55.2
• /
• 2010

최근 태양전지에 대한 연구가 본격적으로 진행 중인 가운데 Local back contact 태양전지에 대한 연구가 새로운 이슈로 떠오르고 있다. LBC 구조의 태양전지는 후면 passivation에 대한 최적화 공정이 가장 중요하다. 후면 passivation으로 사용되는 물질로는 $SiO_2$, SiNx, $Al_2O_3$ 등의 산화막이 대표적이다. 본 연구에서는 LBC 구조 태양전지의 후면 passivation 박막으로 사용되는 $SiO_2$ 산화막의 공정가변에 따른 박막의 특성을 비교 분석하였다. $SiO_2$ 성장은 RTP를 사용하였다. 성장 온도 $850^{\circ}C$의 온도에서 진행하였으며, 4L/min의 $O_2$분위기에서 진행하였다. 공정 시간 5분 일 때 12.5nm, 15분 일 때 21.7nm의 두께의 박막을 성장 시킬 수 있었다. Carrier lifetime 확인 결과 박막의 두께가 얇을수록 lifetime이 향상함을 확인 할 수 있었고, C-V 측정을 통한 charge 비교를 통해 두께가 얇은 박막 일수록 더 적은 positive charge를 갖고있는 것을 확인 할 수 있었으며 이를 통해 passivation 효과가 우수함을 확인 할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.589-594
• /
• 2009

We have studied electro-optic characteristics as a function of passivation thickness existing between common electrode and pixel electrodes in the fringe-field switching (FFS) mode using the LC with positive dielectric anisotropy. A steep increase in the transmission is observed with increase in the passivation layer from $0.29{\mu}m$ to $1.09{\mu}m$ and thereafter it almost saturates over the $1.09{\mu}m$ of passivation layer. This saturation is mainly associated with correlation between transmittance at the center region of pixel electrode and at the center region between pixel electrodes. From the results, optimal thickness of passivation layer can be defined.

• 한국군사과학기술학회지
• /
• 제12권4호
• /
• pp.483-490
• /
• 2009

In this paper, a novel low-damage silicon nitride passivation for 100nm InAlAs/InGaAs MHEMTs has been developed using remote ICPCVD. The silicon nitride deposited by ICPCVD showed higher quality, higher density, and lower hydrogen concentration than those of silicon nitride deposited by PECVD. In particular, we successfully minimized the plasma damage by separating the silicon nitride deposition region remotely from ICP generation region, typically with distance of 34cm. The silicon nitride passivation with remote ICPCVD has been successfully demonstrated on GaAs MHEMTs with minimized damage. The passivated devices showed considerable improvement in DC characteristics and also exhibited excellent RF characteristics($f_T$of 200GHz).The devices with remote ICPCVD passivation of 50nm silicon nitride exhibited 22% improvement(535mS/mm to 654mS/mm) of a maximum extrinsic transconductance($g_{m.max}$) and 20% improvement(551mA/mm to 662mA/mm) of a maximum saturation drain current ($I_{DS.max}$) compared to those of unpassivated ones, respectively. The results achieved in this work demonstrate that remote ICPCVD is a suitable candidate for the next-generation MHEMT passivation technique.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.36-40
• /
• 2007

Inorganic layers, such as SiOxNy and SiOx deposited using plasma sublimation method, were tested as passivation layer for organic thin-film-transistors (OTFTs). OTFTs with bottom-gate and bottom-contact structure were fabricated using pentacene as organic semiconductor and an organic gate insulator. SiOxNy layer gave little change in characteristics of OTFTs, but SiOx layer degraded the performance of OTFTs severely. Inferior barrier properties related to its lower film density, higher water vapor transmission rate (WVTR) and damage due to process environment of oxygen of SiOx film could explain these results. Polyurea and polyvinyl acetates (PVA) were tested as organic passivation layers also. PVA showed good properties as a buffer layer to reduce the damage come from the vacuum deposition process of upper passivation layers. From these results, a multilayer structure with upper SiOxNy film and lower PVA film is expected to be a superior passivation layer for OTFTs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1412-1413
• /
• 2006

In this research, an organic thin 13 passivation layer was newly adopted to prefect the organic layer from ambient moisture and oxygen. As the organic thin film passivation layer, poly methyl methacrylate thin films (ppMMA) were deposited using a plasma polymerization technique. In order to their passivation performance for OLEDs, water vapor transmission rate (WVTR) of the ppMMAs were analyzed and luminance-current-voltage (L-I-V)/luminance-time (L-T) characteristics of the OLEDs with and without ppMMA passivation layer were investigated. The OLEDs had a structure of ITO/TPD (HTL)/Alq3(EML&ETL)/Al. The OLED with ppMMA passivation layer showed improved L-T performance than that of without ppMMA passivation layer.

• 센서학회지
• /
• 제30권2호
• /
• pp.119-124
• /
• 2021

Isolation and separation of biological nanoparticles, such as cells and extracellular vesicles, are important techniques for their characterization. Dielectrophoresis (DEP) based on microfluidic chips is an effective method to isolate and separate the nanoparticles. However, the electrodes of the DEP chips are electrolyzed by the electrical signals applied to the nanoparticles. Thus, the isolation/separation efficiency of the nanoparticles is reduced considerably. Through this study, we developed a microfluidic DEP chip for reliable isolation/ separation of nanoparticles and developed a passivation technique for the protection of the DEP chip electrodes. The electrode passivation process was designed using a hydrogel and the stability of the hydrogel passivation layer was verified. The fabricated DEP chip and the proposed passivation technique were used for the collection and dispersion of the fluorescent polystyrene nanoparticles. The proposed chip and the technique for isolation and separation of nanoparticles can be leveraged in various bioelectronic applications.