• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2895-2901
• /
• 2011

SeoulMetro(line number 1 to 4) for the first half of the year. Therefore air quality in the subway is very important. It is passengers, such as sneezing and respiratory vital activities, Suspended due to skin keratin microbial action, and Microbial contaminants such as viruses. Hypersensitivity disorders, an atopic dermatitis, infectious diseases, allergic diseases, and can cause respiratory diseases. Ministry of Environment and National Institute of Environmental Research is managed so the life bacteria. It is emerging as the occupational health problems. Introduction of an appropriate ventilation system for cooling and dehumidification is needed. In line number 2, commuting and normal trains are measured in-room floating microbes. Suspended bacteria and fungi suspended in 2011 for 85 ~ 385$cfu/m^3$, 67 ~ 98$cfu/m^3$ is lower than baseline. Suspended to prevent microbial contamination and air conditioning equipment performance is a substantial improvement. Suspended micro-organisms and the impact on passenger room ventilation is increased. Electric car how to improve air quality substantially investigated.

• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.2
• /
• pp.3-27
• /
• 2012

The Warsaw Convention for the Unification of Certain Rules Relating to International Carriage by Air was adopted in 1929. In 1999, the ICAO adopted the Montreal Convention for the Unification of Certain Rules for International Carriage by Air vastly modernizing the unification of private air law. The Montreal Convention replaced the instruments of the Warsaw system, and came into force on 4 November 2003. The Montreal Convention is not only an international convention. It has also exercised a considerable influence on national legislation. Korea has made the national legislation of the Part VI the Carriage by Air of Commercial Act on April 29, 2011, and it has brought into force on November 24, 2011. The national legislation of the Part VI the Carriage by Air of Commercial Act of Korea has the provisions on the liability for damage caused to passenger, the liability for damage caused to baggage, and the liability for damage caused to cargo. The main feature of the liability regime of the air carrier under the Montreal Convention is the two-tier liability system for death or injury of the passenger with strict liability up to 100,000 SDR and presumptive liability with a reversed burden of proof without any limit above that threshold. The national legislation of the Part VI the Carriage by Air of the Commercial Act of Korea has adopted the main principles of the liability of the air carrier under the Montreal Convention. In conclusion, the national legislation relating to the liability of the air carrier by the Korean government will contribute to settle efficiently the dispute on the carrier' liability in respect of the carriage of passengers, baggage and cargo by air, and to provide proper compensation to the passenger or consignor who has suffered damage, subject to the defenses and limitations it sets out.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.81-94
• /
• 1997

The construction of Incheon International Airport(IIA) was planned in order to meet the national air transport demand which has been rapidly increased, and to be a major hub airport in Northeast Asia. However, it is inevitable to compete with Japanese airports because Japanese government also planned to expand greatly the airport capacity in Tokyo area and Kansai Airport in Osaka area. Since a hub airport should have convenient connecting flights to spoke cities, it is required for IIA to have plenty of short-haul flights to the cities around Seoul, for example, to the cities in East China, Japan and other East Asian countries. IIA authority and Korean national air carriers should coordinate to develop air transport demand for short-haul international route and establish efficient hub-spoke flight schedules. This would be a essential precondition to function as a hinterland hub in Northeast Asia. Reflecting the geographical position, the function as a hourglass hub could be possible, if IIA is utilised by major airlines as a bridge to connect passengers between cities in Southeast Asia and 'cities in North America. To be a successful hourglass hub, the Korean national carriers must try to engage in the joint operations or the alliances with the major airlines of Southeastern countries or North American countries. All of these could be accomplished through the cooperation among government, airport and national air carriers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1517-1524
• /
• 2014

In recent years, the interest of environmental-friendly transportation modes has been growing. This is because of social and environmental problems such as increasing gas price and climate change. In Europe, bike-sharing service, one of the environmental-friendly transportation modes, has been already operated. Bike-sharing service named "Tashu" has been operated in Daejeon city since 2009. This study is a fundamental research to increase utilization efficiency of bike-sharing service and to decide optimal locations of bike stations. In addition this study examines characteristics of bike usage and analyzes factors affecting to demands using multiple regression model. Based on the result of examining of characteristics of bike usage, the rate of bike usage is higher compared with installation rate of public bike stations near parks in Daejeon. In addition demands of bike usage in weekend is higher than in weekday. It reveals that the main purpose of bike usage could be recreational activities. The return rate at the same location with rental station is comparatively high. Moreover, bike usage pattern is biased in specific areas (Dunsan and Yuseong) because bike-sharing stations are not equally located. As a result of multiple regression model, the factors affecting to demands are number of passengers in buses, length of bike lanes, parks, distance to waterfront, and rate of young people. A statistical significance of factors (r-square) is 0.748, which has strong relationship.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.367-371
• /
• 2014

When the crew or passengers fall into the water due to marine accident of vessel, it is very important to rescue them quickly. In the case of marine accidents, most people in distress have been wearing a lifejacket, so if the GPS and Cospas-Sarsat communication module will be integrated within the lifejacket, it is easy to rescue them. In this paper, development of the dual band lifejacket-integrated antenna for GPS and Cospas-Sarsat communication is discussed. The antenna with the FR-4 substrate of 0.2mm thickness for flexibility was designed that it can be fitted close to the shoulder of the life jacket and operate at 1.575GHz and 406MHz. The GPS communication antenna was implemented with a ring-slot antenna having a circular polarized characteristic and a meander type linear polarized antenna is used as Cospas-Sarsat communication. The two antennas are fed by a single microstrip line and an open stub is used to minimize the mutual interference between the two antennas. The performance of the fabricated antenna attached to the life vest is confirmed by the measurement of the return loss at GPS and Cospas-Sarsat frequency bands.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.539-546
• /
• 2011

Traffic accident collision interpretation is composed of various shapes, and speed variations working to the vehicle during collision are utilized as a very important factor in evaluating collision degrees between vehicles and safety of passengers who got in the vehicle. So, methods of interpreting results on speed variations utilizing simulation programs on the collision interpretation become necessary. By the way, reliability evaluation on each program is being required because various collision interpretations simulations are spread widely. This study utilized collision interpretation programs such as EDSMAC and PC-CRASH adopting completely different physical approaches, and then carried out collision experiments of one-dimensional front and two-dimensional right angle while changing values of a lot of collision factors such as vehicle's weight, center of gravity, rolling resistance, stiffness coefficient, and braking forces among early input conditions. Also, the study recognized effects of collision factors to speed variations as output results during crashing. As a result of this research, two simulation programs showed same speed variations together on the vehicle's weight, center of gravity, and braking forces. Stiffness coefficient of the vehicle reacted to EDSMAC only, and rolling resistance coefficient did not affect any particular influences on speed variations. However, there appeared a bit comparative differences from the speed variation's values, and this is interpreted as responding outcomes by applying fixed properties values to each simulation program plainly. Therefore, reliability on analysis of traffic accident collisions shall be improved by doing speed analysis after taking the fixed value of simulation programs into consideration.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.1
• /
• pp.31-37
• /
• 2016

The Child Occupant Safety Assessment was first introduced and carried out by Euro NCAP in 2003, with the goal of ensuring manufacturers to develop safe vehicles for passengers of all ages; the objective was to evaluate the safety and protection offered by different Child Restraint Systems (CRS) in the event of a crash. In 2013, the formerly used P child dummy series was replaced by newer and more biofidelic Q1.5 and Q3 child dummies, representing 1.5 and 3 year old children respectively. The frontal and side impact dynamic performances of the Q1.5 and Q3 were tested within all classes of vehicles assessed by Euro NCAP at the time. As an extension to that initiative, Q6 and Q10 child dummies were later developed representing children of 6 and 10 years old. Since the protection of larger children during vehicle crashes relies greatly on the interaction of vehicle restraint systems such as seat belt and the CRS, instrumented Q6 and Q10 dummies will be used to assess the protection offered in the event of front and side impact crashes. In this paper, we focused on injury criteria of Q6 and Q10 child dummies at 64 kph 40% offset frontal crash test. The whole procedure was designed with DFSS analysis. The full vehicle sled test results of both dummies were conducted with different restraint systems settled through previous sled test. It showed that several injury criteria and image data were collected as the result of the full vehicle sled test. Based on the results of these investigations, this paper describes which factor is most important and combination shows the best performance when evaluating rear seat occupant protection for Q6 and Q10 child dummies.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.444-456
• /
• 2020

Objectives: This study developed an index for the indoor air quality management of city buses to allow the provision of indoor air quality information to city bus users. Methods: Nine city buses in Seoul were measured for PM₁₀, PM_2.5, CO₂, temperature, and relative humidity through IoT sensors. Big data collected through the sensors was analyzed to identify indoor air quality on city buses and graded through the index. Results: As a result of dividing the measured city bus data into five grades through the IAQ index, PM₁₀ was rated "good" for 30.4% of the total measured values, and 9.2% were rated "risky". For PM_2.5, 67.7 percent were rated "good" and 0.4 percent were rated "risky". For CO₂, 0.9% were 'good' and 1.1% were 'risky'. The results of the classification through the IAQ index for city buses showed that the impact of good, normal, sensitive, bad, and dangerous were 2.7, 38.8, 46.0, 12.4, and 0.1%, respectively. According to the analysis by measurement area, Seocho-gu, Gangnam-gu, Seongdong-gu, Gwangjin-gu, and Dobong-gu are "normal" and other areas (Seodaemoon-gu, Jongno-gu, Yongsan-gu, Jung-gu, Seongbuk-gu, Dongdaemun-gu, Junggye-gu, Gangbuk-gu, and Nowon-gu) are all rated "sensitive". Conclusions: When analyzing cases where PM₁₀ and CO₂ indices are in the "bad" zone, the concentration is generally found to increase during rush hour, during which there are a large number of passengers. It is expected that indoor air quality management in vehicles will be necessary during rush hour.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.5-14
• /
• 2013

Purpose - We live in a world of constant change and competition. Many airports have specific competitiveness goals and strategies for achieving and maintaining them. The global economic recession, financial crises, and rising oil prices have resulted in an increasingly important role for facility investment and renewal and the implementation of appropriate policies in ensuring the competitive advantage for airports. It is thus important to analyze the factors that enhance efficiency and productivity for an airport. This study aims to determine the efficiency levels of 20 major airports in East Asia, Europe, and North America. Further, this study also suggests suitable policies and strategies for their development. Research design, data, and methodology - This paper employs the DEA-CCR, DEA-BCC, and DEA-Malmquist production index analysis models to determine airport efficiency. The study uses data on the efficiency and productivity of the world's leading airports between 2006 and 2010. The input variables include the airport size, the number of runways, the size of passenger terminals, and the size of cargo terminals. The output variables include the annual number of passengers and the annual cargo volume. The study uses basic data from the 2010 World Airport Traffic Report (ACI). The world's top 20 airports (as rated by the ACI report) are investigated. The study uses the expanded DEA Model and the Super Efficiency Model to identify the most effective airports among the top 20. The Malmquist productivity index analysis is used to measure airport effectiveness. Results - This study analyzes longitudinal and cross-sectional data on the world's top 20 airports covering 2006 to 2010. A CCR analysis shows that the most efficient airports in 2010 were Gatwick Airport (LGW), Zurich Airport (ZRH), Vienna Airport (VIE), Leonardo da Vinci Fiumicino Airport (FCO), Los Angeles International Airport (LAX), Seattle-Tacoma Airport (SEA), San Francisco Airport (SFO), HongKong Airport (HKG), Beijing Capital International Airport (PEK), and Shanghai Pudong Airport (PVG). We find that changes in airport productivity are affected more by technical factors than by airport efficiency. Conclusions - Based on the study results, we offer four airport development proposals. First, a benchmark airport needs to be identified. Second, inefficiency must be reduced and high-cost factors need to be managed. Third, airport operations should be enhanced through technical innovation. Finally, scientific demand forecasting and facility preparation must become the focus of attention. This paper has some limitations. Because the Malmquist productivity index is based on the hypothesis of the, the identified production change could be over- or under-estimated. Further, as DEA estimates the relative efficiency. It also cannot generalize to include all airport conditions because the variables are limited. To measure airport productivity more accurately, other input variables and environmental variables such as financial and policy factors should be included.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.127-142
• /
• 2018

Ttukseom was once a suburban area that had a government horse ranch for national use and a naenogpo (area of royal farm land). During the Japanese colonial period, a pleasure ground was built at Ttukseom, and after independence, it has been used as a park through the process of urbanization. This study examines the creation of the Ttukseom Pleasure Ground and the process through which the pleasure ground were transformed to a park. This study also explores its landscape and cultural aspects. In the 1930s, Gyeongseonggwedo (京城軌道), a private railway company, built a pleasure ground at Ttukseom to attract passengers, according to the business model of Japanese railway companies, in which recreational areas were developed near railway routes. Mass media portrayed this area as a "rural landscape" in contrast to the city. The Ttukseom Pleasure Ground emerged as a popular summer resort for Gyeongseong citizens. At the same time, it was managed by Gyeongseongbu (京城府). The city of Seoul began to manage the Ttukseom Pleasure Ground following independence, and development plans for Ttukseom as a pleasure ground or a park were continuously drafted but never implemented. Even after Korea's independence, the operation and use of the pleasure ground did not change significantly from the colonial era. In the late 1980s, the Ttukseom Pleasure Ground became the Ttukseom Han River Citizen's Park, and the sandy beach of the Han River was removed. Nonetheless, the previous facilities and major activities such as an open-air swimming pool, camp ground, and areas for boat recreation remained as major park programs. When the urbanization of Ttukseom was completed, its idyllic image disappeared and it became a park instead of a pleasure ground. Since parks expand their programs, it can be concluded that by providing those kinds of programs, the Ttukseom Pleasure Ground transformed to a park.